Hydraulic power unit

Orsta Hydraulik

Condition: used, Year of construction: 1976, liter capacity 90 l/min tank contens 100 l voltage 220 / 380 V tank dimensions ca. 800 x 380 x 400 mm height with motor ca. 900 mm power capacity 2,2 kW weight 57 kg The capacity liter is estimated because on the type of the motor is model KMR Hfedpfjv Dxz Aex Aadec 90 L 4. Machine dealer with own stock of 1600 m².

Year of construction: 2008, condition: ready for operation (used), Loading chamber dimensions: 280x580mm, loading height: 700mm, max. load: 300kg, with protective housing and documentation, machine was functional until the end, complete maintenance would have to be carried out on the machine, inspection is possible. Hodpjqgfbgsfx Aadofc

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit -Manufacturer: Orsta, universal unit -Engine: 2.2 kW/1410 rpm Hfjdpev Auxusfx Aadsc -Nominal pressure max.: 160 bar -Liter output: 2.5 l/min -Hydraulic tank/filter/valves: see pictures -Dimensions: 750/380/H620 mm -Weight: 110 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 500 mm -Type: S1-32/20x500 -Piston rod: Ø 20 mm -Mounting: bolt circle Ø 85 x 8 mm Hedpfxsv I S Eie Aadsfc -Dimensions: 710/83/H103 mm -Weight: 5.5 kg

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Hedpfxjq U R T No Aadjfc Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 200 mm -Type: B1-32/14x200 TGL10906 Hjdjv Nh Iiopfx Aadjfc -Piston rod: Ø 14 mm / M12 -Hole: Ø 20 mm -Number: 1x cylinders available -Price: per piece -Dimensions: 365/52/H52 mm -Weight: 2.4 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Manufacturer: Orsta, pneumatic cylinder A125-32x320 TGL 20744 -Stroke: 230 mm Hedpfx Asft Ah Readefc -Piston rod: Ø 32 mm, M20 x 1.5 -Dimensions: 610/155/H155 mm -Weight: 15.7 kg

Condition: used, Year of construction: 1989, operating hours: 74,900 h, clamping force: 850 kN, screw diameter: 40 mm, overall weight: 3,700 kg, Machine no. 145464 Year of construction 1989 Machine weight 3700 kg (without oil filling) Clamping force 850kN Heating 8,31KW Motor 18,5KW Total power 27,2KW Machine cycles 7,112,306 Operating hours 74,900h Interfaces: Hjdpfx Aor Hrqroadefc Master computer, handling, blow-out, selector switch, core pull 1 hydraulic, mold temperature control 3 pcs. The following accessories etc. are included with the machine: Complete 50 injection unit thermoplastic , Selecting diverter , Hydraulic infeed conveyor (height adjustable 3 levels) (integrated in control) , Diskette drive external (Arburg original) , Documentation and work reports from the machine by Arburg Service , Machine setting course CMD documents (folder) , E-plan , Documents also in digital form , Oil filling (must be pumped into a container before transport (pump is available)) , Electronic water battery

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 80 mm -Piston rod: Ø 36 mm Hfsdsd Erwaopfx Aadec -Stroke: 125 mm -universally applicable: -Number: 2x available -Price: per piece -Dimensions: Ø 95/H575 mm -Weight: 19 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Hfsdpod Evuzsfx Aadjc -Piston diameter: approx. 50 mm -Piston rod: Ø 22 mm -Diameter eyes: 30 mm -Piston rod thread: M18 x 1.5 -Stroke: 200mm -Quantity: 1x available -Price per piece -Dimensions: 445/90/H80 mm -Weight: 6.7kg

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Hfodopugwijpfx Aadec The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston Hfodpfxjgv Nque Aadjc -Manufacturer: Orsta, hydraulic cylinder type 4514-3328/0 Pn12 -Stroke: 404 mm -Piston rod: Ø 35 mm -Cylinder: Outer Ø 106 mm -Mounting: Bolt circle Ø 180 mm -Dimensions: 910/220/H220 mm -Weight: 30 kg

Condition: good (used), hydraulic unit, hydraulic pump, hydraulic pump, universal unit, gear pump, -Manufacturer: Orsta, hydraulic pump A10 TGL 10859 -Motor: 2x 0.55 kW 1360 rpm -Pressure: nominal pressure 16 MPa / 160 bar max pressure 200 bar -Flow rate: total approx. 12 l/min (2 x 6 l/min) Hodpfx Aeigrwijadjfc -Hydraulic tank: with indicator -Individual components: see photos -Number: 2x aggregate available -Price per piece -Dimensions: 735/510/H1395 mm -Weight: 112 kg/pc.

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Hedpfx Aajghrgujdsfc

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 200 mm -Type:B2-50/22x200 Pb10 TGL 10906 -Piston rod: Ø 22 mm / M18 -Holes: Ø 30 mm -Dimensions: 465/75/H90 mm Hjdpev S Tn Tsfx Aadjfc -Weight: 6.6 kg