ORT RP18

ORT RP18

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Type RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Dodpjzb Imajfx Abaskn Reference: F24

Condition: good (used), TECHNICAL DATA AXLE Rapid feed X,Y: 15000 mm/min Rapid feed A,B: 15000 mm/min Rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C-axis: 0.001° MACHINING PERFORMANCE Max. turning diameter: 20 mm Max. Headstock stroke: 205 mm Max. Drilling capacity: Stationary: 14 mm; Driven: 8 mm Max. Tapping capacity: Stationary: M10 x P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: Spindle drive Main spindle motor: 3.7 / 5.5 kW Main spindle bore: 26 mm WHEELING SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Clamping length: 75 mm Spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2.2 / 3.7 kW Indexing angle: 1°, 15° CONFIGURATION Operation mode: Right-handed Dimensions: 2700 x 1400 x 2400 mm Weight: 3400 kg SCOPE OF OFFER U.A: (list not exhaustive) Control system: Fanuc Dkjdpfxeu Uic Tj Abajn Fire extinguishing system: Siemens Oil mist separator: Donaldson Transformer Hydraulic unit Parts conveyor Chip conveyor Bar feeder: LNS Tool holder Exact scope of supply according to photo gallery We assume no liability for the correctness, completeness and up-to-dateness of the information.

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Dksdeyml Ekspfx Abajn Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm - Power of main motor: 7.5kw Photographs taken before reconditioning

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled Dkedjvxa Dbopfx Abaen See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 12000 [rpm] - C axis indexing precision : 1 [°] COUNTER-SPINDLE - Max. bar diameter : 16 [mm] - Spindle speeds : 8000 [rpm] GUIDE BUSH HOLDER 1 Dodpfxou Elkqo Abaskn - Number of positions : 9 - Number of motorized positions : 3 - Live tools speed : 8000 [rpm] END ATTACHMENT - Number of positions : 3 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 400 [V] MACHINE HOURS - Number of working hours : 73252 [h] - Number of spindle hours : 50900 [h] EQUIPMENT - CNC : Fanuc 18iT - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank - Bar loader : IEMCA CH 220/32L - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Number of turning tool holders : 3

Condition: used, ORT RP18B overhauled Djdpouua H Rjfx Abaekn

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Dkedpfx Asv Tqdbobasn Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm Dkjdoyz Dcfspfx Abaon tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: excellent (used), Year of construction: 2008, operating hours: 9,000 h, functionality: fully functional, TECHNICAL DETAILS Control: Mitsubishi Meldas 700 Main Spindle Machining diameter: 20 mm Dkodpfxjxf Hqqj Abaon Machining length without repositioning: 200 mm Spindle bore: 24 mm Spindle speed: 200 - 10,000 rpm Spindle indexing C-axis: 0.001° Motor power (built-in motor): 2.2 / 3.7 kW Sub-Spindle Machining diameter: 20 mm Spindle speed: 200 - 8,000 rpm Spindle indexing C-axis: 0.001° Motor power: 0.75 / 1.5 kW Driven Tools at Vertical Holder Speed: 200 - 4,500 rpm Motor power (AC servo motor): 1.0 kW Number of tools: 6 Tool System Turning tools (12x12x130): 5 Tool holder/parting-off blade (16x12x130): 1 Drilling tools (front): min. 3 Drilling tools (rear): 5 Tool holders, quills (diameter): 19.05 mm Tool holders, turning tools (shank cross-section): 12 mm Collets and Guide Bush Collet main/sub-spindle: F25 (145E) Guide bush (Neukomm): T223 (22.001) Rapid Traverse All axes: 32 m/min Machine Specification Required space (without magazine) L/W/H: 2,430 x 1,085 x 1,770 mm Spindle height: 1,050 mm Machine weight: 2,150 kg Power supply: 8 kVA EQUIPMENT - 6 turning tools (12 mm shank cross-section), - 3 driven tools for cross machining - 3 driven tools for face machining on the main spindle - 3 driven tools for face machining on the sub-spindle - Main spindle with C-axis - Sub-spindle with C-axis - 3x powered tool rear side machining - Yellow warning light - Interior lighting - Workpiece conveyor belt - FMB Turbo 3-26 bar feeder - Option for long parts - Spindle flushing (Scherzinger pump)

Condition: new, Year of construction: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units separately adjustable 1st unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with a 3 kW motor Dedpfx Aboug Ty Hjajkn 2nd unit, rotor group: group of 5 oscillating rotor brushes, Ø 115, each with one 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive 4th unit, brush: Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: electric Height display: digital Control: touchscreen Feed speed: 4 - 12 m/min Motor power feed: 0.37 kW Machine length: Machine width: Weight: