Overhauled ORT RP30 B PLC

ORT RP30 B PLC

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Blsdpsx H Rmujfx Ab Djl Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,240 h, This Flow Mach M500-2060 was manufactured in 2019. It features a large cutting area of 2000x6000 mm, a programmable Z-axis, and the advanced Dynamix Waterjet XD for precise 2D and 3D cutting. Equipped with a PASER 4 cutting head and a HyperJet 94i-D pump, it ensures high efficiency. Consider the opportunity to buy this Flow Mach M500-2060 waterjet cutting machine. Contact us for more information about this machine. Application Types Cutting Bedpex D Rxpefx Ab Dsll

Condition: used, Year of construction: 2006, functionality: unexamined, We are offering here a rotary table from the brand Parkson. The model is PAR-251 R. The rotary table has a diameter of just under 250mm. Bodpsxtu Efofx Ab Doll Feel free to contact us for a non-binding offer.

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, Bljdpfozh I Agjx Ab Del table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Bledpfx Abouz If Ns Del Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Tool holder VDI 30 Blsdpjww Hluofx Ab Djl

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces Blsdpfox H A Nbex Ab Dol • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Year of construction: 1992, condition: good (used), machine/vehicle number: 10-166, OFFER 13467 Technical data: - Maximum material thickness with a tensile strength of 40 kg/mm²: approx. 3 mm - Shaft diameter: 45 mm Blodpfxehrm Iue Ab Del - Manual hydraulic adjustment of the upper roller - Electric foot switch - Drive: 400 V / 1.1 kW - Space requirement: approx. W 550 x H 1200 x D 1200 mm - Weight: approx. 180 kg

Year of construction: 2003, condition: refurbished (used), machine/vehicle number: 50/140/03, GENERAL CHARACTERISTICS Ø Grinding Wheel Dimensions (OD x ID x width) 508 mm Regulating wheel width 254 mm Diamond dressing speed Ø508 x 254 mm Lubrication (Auto/Manual) centralizado automático / automatic lubrication CNC Brand FANUC CNC Model Series 18i - T CNC Axes Nº 8 Grinding wheel width 254 mm ELECTRICAL CHARACTERISTICS Total Power 25 kW Bljdpfed Nw T Iex Ab Djl Voltage 220/380 v DIMENSIONS AND WEIGHTS Long 2150 mm Width 2200 mm High 3400 mm Weight 8000 kg

Condition: used, ORT RP18B overhauled Bodeuua H Rspfx Ab Dell