Band Saw

MEBA MEBAbase 24 DG-HS

Year of construction: 1997, condition: excellent (used), A used, very well-maintained cold circular saw from EISELE, equipped with a 370mm circular saw blade, steplessly adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Bodpfxekfp D Te Al Aodh Cutting range: Round 90°/45° right/left/30° right: 130/130/105mm Square 90°/45° right/left/30° right: 120x120/100x100/90x90mm Rectangle 90°/45° right/left/30° right: 200x100/140x100/100/100mm Pneumatic connection: 7 bar Working height: 900mm Machine dimensions (W x D x H): 865x1332x2175mm Weight: 460kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: new, Year of construction: 2022, IN STOCK -- The ARG 235 plus is a manual metal bandsaw with high cutting accuracy. This machine allows miter cuts from -45° to +30° continuously (swivel range left 45° and right 60°) Technical Specifications: ● Cutting range: Bedpfomftv Rox Al Aodh - 90° round: 235 mm / square: 230 mm / rectangle: 280 x 180 mm - 45° Right round: 165 mm / square: 145 mm / rectangle: 185 x 180 mm - 30° Right round: 115 mm / square: 80 mm / rectangle: 115 x 80 mm - 45° Left round: 185 mm / square: 160 mm / rectangle: 185 x 100 mm ● Drive Power Saw Blade: 0,9 / 1,4 kW / 400 V / 50 Hz ● Saw Blade Speed: 40 and 80 m/min ● Saw Blade: 2710 x 27 x 0,9 Standard Equipment: ● Powerful saw blade drive ● Stepless adjustment of the cutting feed from the control panel ● Manual clamping of the workpiece, movable clamping stock with dovetail guide ● Easy adjustment of the saw for miter cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in different sizes or versions!

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm Bsdpfeu Dbvtjx Al Aodh total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: new, pressure 40 t Bdedpfob U Hwtsx Al Aeh throat 225 mm stroke 8-84 mm Table dimensions 580 x 450 mm ram adjustment 55 mm no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 H7 mm hole in the table 210 x 170 mm T-slots 22 clamping plate 570 x 450 x 65 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: new, cutting diameter 235 mm dimensions of saw-band 2645 x 27 x 0,9 mm cutting width 280 x 190 mm Bdodsp Scqyopfx Al Aoh cutting speed 45/90 m/min 120 mm 120 mm 190 mm Impact energy 170 mm connected load frequency 400 Volt total power requirement 1,1 kW weight of the machine ca. 290 Kg dimensions 1,2 x 0,8 x 1,2 m Double miter band saw -Miter cuts up to 60° left and 45° right -Vice with quick clamping device -Band tension control -Electr. Automatic cooling

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. Bdedpfx Alsudi Uzs Aeh The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: good (used), Year of construction: 2011, From a company liquidation: Bsdpfswa Ecqjx Al Asdh Berg und Schmid VKS 370 HA Year of manufacture 2011 Semi-automatic machine 4-meter roller conveyor left + right Left stop with digital length measuring system, adjustable via handwheel Cutting capacity with a 370mm saw blade: Round 120mm - Square 100mm - Rectangle 180x100mm at 90° at 60°: Round 110mm - Square 90mm - Rectangle 90x100mm Miter cuts left up to 60° - right up to 45° Saw blade mount 40mm Saw blade speed 15-70 rpm 380 volts Coolant pump Semi-automatic function: 1. Clamp the material 2. Saw starts 3. Lower at rapid traverse to the beginning of the material or cut immediately for serial cutting 4. Remove the saw blade 5. Raise the frame until just above the material 6. Open the clamping jaw

Condition: ready for operation (used), Two identical machines are available. Connected load: 32kW, length: 3500mm, width: 2400mm, height: 2400mm, weight: 3t. On-site inspection is possible. Bjdpfeuyk Rljx Al Aodh

Condition: new, cutting diameter 255 mm saw band length 2765 x 27 x 0,9 mm table height 950 mm 18-110 m/min 255 mm capacity 90 degrees: square 240 mm capacity 90 degrees: flat 300 x 180 mm capacity 45 degrees: round 210 mm capacity 45 degrees: square 190 mm capacity 45 degrees: flat 200 x 160 mm capacity 60 degrees: round 135 mm Bdodpfst I D Tusx Al Aeh capacity 60 degrees: square 110 mm capacity 60 degrees: flat 130 x 100 mm capacity 45 degrees: round rechts 180 mm capacity 45 degrees: square rechts 160 mm capacity 45 degrees: flat rechts 180 x 100 mm 1,5/1,8 kW 350 kg 1700 x 900 x 2000 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system

Condition: new, table length 2400 mm Bdodpfowz Rubex Al Aoh table width 1200 mm 4000 kg height of stroke 510 - 1550 mm total connected load 1,5 kW connected load frequency 400 V weight of the machine ca. 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement.