Folding machine

PIESOK XO 1000 / 3A

Condition: new, sheet width 1020 mm plate thickness 2,5 mm distance between columns 1050 mm daylight opening mm 135 ° total power requirement Handbetrieben kW Lrjdeupxf Uspfx Adtek weight of the machine ca. 0,32 t dimensions of the machine ca. 1,4 x 0,6 x 1,3 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock Lsdpfoxacg Rjx Adterk - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: new, Bernardo swivel bending machine with segmented top -, bottom - and beam TB 1020 Flex Working length 1020 mm Max thickness of sheet metal (400 N / mm2) 2.0 mm Maximum opening width with segments 48 mm Lsdpfx Aod Hxm Isdterk Maximum opening width without segments 150 mm Maximum clearance height 125 mm closed Bending angle 0-135 ° Backgauge 600 mm Working height 900 mm Width 1400 mm Depth * 1070 mm Height 1260 mm Weight 430 kg * with Backgauge Properties Piano inserts in the top, bottom and beam results in a large number of bending possibilities Tapes and special sections with opposite bends are easily achievable with these models Universal bending machines for sheet metal working and repairers Simple swivel movement of the beam by means of handle Slight adjustment of the upper beam for efficient working High upper beam for the manufacture of highly bent profiles Large-sized flat Guide for precise work A cylinder of help helps the edges off the bending process Scope of delivery Segmented top - sub and bending flange Backgauge Corner segment left / right side 75 mm | 25. 30. 35. 40. 45. 50. 75. 100. 200. 270 mm

Condition: new, 4 St. 2 St. Lredpexabbtofx Adtsk Plate thickness 45 mm table length 2000 mm range L-W-H 2000 x 700 x 900 mm weight 152 ca. kg. Furnishing: - brand new workbench - Multiplex worktop 45 mm with surrounding edge - left: 3x drawers - right: 1x drawer, 1x door in COLOR: BLUE / GREEN OR GRAY available!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, working width: 1,020 mm, folding beam adjustment: 46 mm, bending angle (max.): 135 °, overall weight: 340 kg, total length: 1,350 mm, total width: 850 mm, total height: 1,175 mm, Equipment: documentation/manual, Upper and lower blade removable in segments Including manual back stop PNEUMATIC CYLINDER !!! Max. zetcapaciteit over de hele werklength ----- 2.5 mm Max. working length ----- 1020 mm Max. opening width ----- 46 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. angle of attack ----- 0 - 135 Weight ----- 340 KG Width ----- 1350 mm Lsdjga T A Dopfx Adtjrk Depth ----- 850 mm Height ----- 1175 mm

Condition: new, sheet width 1270 mm plate thickness 2,0 mm distance between columns 1300 mm Ljdjupxcgepfx Adtjrk daylight opening 48 mm 135 ° total power requirement Handbetrieben weight of the machine ca. 0,4 t dimensions of the machine ca. 1,6 x 0,9 x 1,2 m Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 260mm.

Condition: ready for operation (used), Year of construction: 1951, Large working width: 1250 mm for sheets up to: 1.75 mm opening width of upper beam: 70 mm adjustability of bending beam: 50 mm Lrjdpfx Adsv D E R Djtok space required: 1880 x 740 x 1140 mm

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Insulation class: H Power cable: 4x3mm² – 5 m Ledpfx Aew Rm Saodtjrk Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, Finger setter with segmented top clamp PNEUMATIC CYLINDER !!! Max. bending capacity over the entire working length ----- 1.5 mm Max. working length ----- 1500 mm Max. opening width ----- 48 mm Width of fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Max. angle of attack ----- 0 - 135 Lsdpfx Aega T Dlodtork Weight ----- 430 KG Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm Ledpfx Adsdzqaaetjrk upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition