Vibratory finishing machine

Rösler R 550/6600 DA

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t Dkedjwtpfpjpfx Abush ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. Dsdpfsf Nku Rjx Abuokh On the last three photos you can see plants of this design in operation.

Condition: like new (used), Year of construction: 2019, operating hours: 13,000 h, functionality: fully functional, Machine: Mazak Quick Turn 200 MSY with bar feeder / loading magazine Year of manufacture: 2019 The machine has already been packed for shipment to Taiwan according to the highest standards for international sea freight. A demonstration by a Mazak electromechanical technician is possible at any time; in that case, we would simply need to unpack the machine on site again. The machine is currently located at a factory of a now-closed facility in Baden Württemberg. Inspection appointments: Calendar week 10. Control: Mazatrol SmoothG Max. turning diameter: 695 mm Max. swing diameter: 575 mm Distance between the chucks (both spindles): 575 mm Travel distances X-axis: 234 mm Y-axis: 100 mm Z-axis: 575 mm W-axis: 585 mm Rapid traverse X/Y/Z/W: 30/21/33/30 m/min Main spindle Drive power: 26 kW Max. spindle speed: 5,000 rpm Spindle nose: A2-6 Spindle bore: 76 mm Max. bar capacity: 65 mm Sub spindle Drive power: 11 kW Max. spindle speed: 6,000 rpm Dsdsygbcfjpfx Abuskh Turret 12 tool stations (VDI type) 12 driven stations Milling drive power: 5.5 kW Max. speed: 5,000 rpm Additional options / equipment Tooleye Parts catcher Interface for bar feeder C-axis on main and sub spindle Coolant supply through sub spindle Air at the turret Engraving function Cylindrical interpolation Clamping force control Thread re-cutting function Preparation for oil mist extraction Mahle coolant filter Chip conveyor (Mayfran) High-pressure pump 15 bar

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 490 mm, spindle bore: 155 mm, center height: 400 mm, turning length: 3,000 mm, spindle speed (max.): 1,250 rpm, spindle speed (min.): 6 rpm, bed width: 700 mm, Turning diameter in gap: 1,050 mm, rotational speed (max.): 1,250 rpm, overall weight: 7,500 kg, three-jaw chuck diameter: 630 mm, ZMM Lathe CU800x3000, 2011, very little used, in excellent condition Specifications: Swing over bed: 890 mm Distance between centers: 3000 mm Spindle bore: 155 mm Bed width: 700 mm Dedpfxoxyf Ece Abuskh Spindle speed: 6.3–1250 rpm Weight: approx. 7500 kg Compliant with ARBO/CE Machine equipped with: • 2-axis digital readout • BISON 3-jaw chuck 630 mm • BISON 4-jaw independent chuck 800 mm • 2 x fixed steady rests with roller fingers • 1 x travelling steady rest • Electrically adjustable tailstock • Tool post with 4 holders • Coolant system • Machine lighting

Condition: excellent (used), IMM 72780 Double-sided polishing machine Mint condition, the machine has hardly been used. TECHNICAL DATA Polishing wheel: 100 - 500 mm shafts: 35 mm Spindle speed: 1500 rpm Voltage: 400 V, 50 Hz Weight of basic machine: Approx. 400 kg No responsibility is taken for the correctness, completeness and up-to-dateness of the information. Dsdpfx Absu Hanysuokh

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Dodpjllvr Dsfx Abuskh Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 6,000 rpm, table width: 1,100 mm, table length: 4,200 mm, rotational speed (max.): 6,000 rpm, Heidenhain iTNC 530 control Tool changer for 60 tools Automatic universal head, 0.02 degree in both axes Machine will be refurbished in 2025 Djdpfxew Ngd Te Abuokh

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE Dedjuq Iwpspfx Abujkh MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Djdowbhq Hopfx Abujkh Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: used, HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 Djdpfx Aoqpdkcjbuekh - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour