Belt linisher

RC Machines 4593 GS

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0618012, Offer 24604 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS Nodpfxovncubs Afwoda - separate wire feed case - intermediate package device - wire feed case 1 linear meter - 4 rollers wire feed continuously adjustable - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Ndodeufgnzspfx Afwea Scale carriage for cutting angles Table size 1000x630mm

Condition: used, MIG MAG welding machine, gas-shielded welding unit, CLOOS type GLC 357 N MIG MAG welding power source Manufacturer's number: 576, Year of manufacture: approx. 1985 Rated power: 350 Amps Power: 350 Amps - 80% duty cycle Ndodpfx Afehubg Tjwsa 310 Amps - 100% duty cycle Adjustment range: stepless Connecting hose package: 4.5 meters Mains connection: 380 Volts, 50 Hz, 32 Amp plug - 2-cycle and 4-cycle welding system - external wire feeder, type CK 72 ZK, with 2-roller drive and 4.5-meter hose package - 3-meter hose package with central connection and CLOOS hand torch - water-cooled - pressure gauge for gas cylinder - welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg Device tested - function is working properly.

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 Nsdpfocxxx Rox Afwsda sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition

Condition: new, Year of construction: 2026, Spindle speed, stepless electronic control: 40-4000 rpm Spindle mount: MK 2 Ndodpfx Ajby Swhjfwoa Table height adjustment with rack and pinion Thread cutting capacity, max: M10 Adjustment of thread cutting depth via digital depth gauge Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment with rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Overhang: 225 mm Column diameter: 60 mm Usable table area (W x L): 330x250 mm Machine dimensions (W x D x H): 420x450x860 mm Machine dimensions (with base): (W x D x H): 452x700x1130 mm Weight: 62 kg Max. distance spindle/table/base: 300/360 mm Motor: AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling kit no. 2 - Felix vise, jaw width 80, clamping range max. 120 mm - Quick-change drill chuck 1-13 mm, mount B16 - Taper shank MK II/B16 - Reducing sleeve MK II/MK I Price: € 320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) Ndedpfxefbt Sij Afwea • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Year of construction: 1992, condition: good (used), machine/vehicle number: 29-0288, Offer 04612 Technical specifications: - Cutting range at 90° (round): 260 mm - Cutting range at 90° (flat): 450 x 240 mm - Cutting range at 45° (round): 230 mm - Cutting range at 45° (flat): 240 x 200 mm - Machine is mounted on the original rotating table - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic lifting and lowering of the saw frame Ndjdpfx Afogin Ndowja - Cutting pressure, infinitely adjustable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement: approx. W 2100 x H 1200 x D 1000 mm - Weight: approx. 500 kg

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. Njdpfx Afsudi Unewoda The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: new, cutting diameter 305 mm Ndodpfeu Dbvtex Afwoa saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm Njdpfxsk D Ewge Afweda - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg