CNC Portal Machining Center

Reichenbacher Univers 1226/4

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor Hnjdpfx Aowg S Tvjadeh

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Processing length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing - Feed conveyor as smooth conveyor (optionally as roller conveyor) Hjdod A Ttxspfx Aadjnh Further technical details and details on request.

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Hnedpfjv Hwk Ujx Aadeh Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: good (used), Year of construction: 1989, functionality: fully functional, planing width: 2,050 mm, height adjustment type: pneumatic, planing height: 300 mm, four-side planer, width: 2200 mm, on a rotary table for curved pieces, enclosed machine Hjdpfx Aow A A Ebeadonh

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Hsdpjvwfqqsfx Aadonh

Year of construction: 1988, condition: repair required (used), mechanisation for planer infeed -For lengths up to ca. 13 m -Ideal unit for KVH (solid construction timber)and BSH (laminated beams) in front of the planer -1 operator -lateral destacking unit -separation -4 cross cut saws -cutting cross section 180x220 mm, 150x300 mm Hsdpfjvbtpsx Aadonh

Condition: used, REX four-sided planer, planing width 51 cm, maximum planing height 20 cm, 2 feed speeds, vertical spindles have 2 rotation speeds, electric table lifting device Hedpsrxf Smjfx Aadonh

Year of construction: 2005, condition: used, HIT mechanization for KVH and BSH production for components up to width 600 mm, height 300 mm, length 18 m consisting of different parts to be delivered individually or completely - layer cross pusher - various cross conveyors - workpiece roller conveyors Hedpfx Aaepiurmedenh - heavy duty roller conveyors - 5 lifting tables with 2 cross conveyors each mounted on traversing carriages - stacker - control cabinets - Roller rails - Travelling binder cut-off saw with waste disposal system

Condition: used, Weinig Profimat 22 with 4 shafts. Movable left shaft with measurement sensor, for automatic movement based on the width of the pieces inserted into the process. Hnedpsryb D Sefx Aadeh Dimensions and weight: Cm. 330*145*H160. Weight 1400 kg. (on pallet)

Year of construction: 2011, condition: used, functionality: fully functional, Finger jointing line for cross sections up to 200 cm² (80/240 mm or 100/200 mm), with the following. components: 1. HOWIAL tilt unstacking - SH/4t - 1,75x1,75x6,00m - 4t - short. Length 2,50 m, semi-automatic separation of the package. For tilting the wood pile up to 45°. Electric motor drive. stack dim. max. 1,75 x 1,75 x 6,00 m max. stacking load 4 t shortest wood length 2,5 m 2. HOWIAL - VE 1 lamella separator for crosscut saw. With pneum. controlled tongues, on which the material is marked for defects, deposited on the roller conveyor below. 3. HOWIAL - evaluation roller conveyor RO-1 digital wood moisture measuring, control and recording system for autom. recording and control of wood moisture in cycle measuring method according to electric resistance principle. 4. gann DMT-8 dig. Wood moisture measuring, control and recording system for automatic detection and control of wood moisture in the cycle measuring method according to the electrical resistance principle. Plant in large switchboard complete with ink jet printer. 5. HOWIAL - crosscut saw AS-30 B pneum. Under table crosscut, with 2 autom. feed units, autom. crosscut. Special photocell control for detection of fluorescent line markings. Automatic waste disposal possible. Saw motor power 7,5 kW Hnjdpfoi Ezx Dsx Aadeh saw blade diameter 700 mm feed drive approx. 2 x 1,5 kW Air pressure 8 bar feed speed max. approx. 60 m/min. 6. HOWIAL - conveyor belt cut off waste, with studded belt and guide plates belt width 350 mm belt 2000 mm long belt speed 0,4 m/sec. 7. HOWIAL - double roller conveyor RO-2 6,00 m long incl. transversal transport, drive by round belt, all rollers driven. Cross transport chain conveyor. Ejection ± moisture right Transport speed adjustable 100 m/min. length approx. 6,00 m Width of rollers approx. 400 mm Diameter 112 mm 8. compact finger jointing machine Cook Bolinder The technical data are original from Cook Bolinder: wood width from 75 to 245 mm Timber thickness from 20 to 105 mm Input lengths from 1m to 6 m Cross sections from 30 cm² to 200 cm² Pressing force 5 - 22 to Spindle diameter 50 mm tine profile 15/15 spindle speed approx. 6000 upm Total electrical connected load approx. 62 kW Machine weight approx. 9 to. Gluing OEST comb system for PU Modern Telemechanique SPS control. 9. HOWIAL - Roller conveyor with destacking system Driven roller conveyor with autom. ejector and hydr. driven destacking arms. Technical data: H: 920 mm L: approx. 12.000 mm 10. safety fences incl. circuit breaker 11. finger joint testing machine BSPLT-100 Testing machine for finger joint bending test according to DIN 1052-1/A1 and EN 385 Support distances freely adjustable, attached dimension scale, autom. calculation of support distances in the software. Fully automatic test procedure by mouse click on PC (not included). Alternatively, the test procedure can be started by key operation on the front panel. Connection of any commercially available PC or laptop (Win 2000/XP) via the supplied RS232 serial cable. Fully automatic measured value logging as well as automatic logging in MS-Excel with graphical display. Representation max. wood width: 300 mm max. wood thickness: 140 mm max. compression force: < 100 kN max. support length: 2100 mm Measuring accuracy WITHOUT DISMANTLING