Transport device

Reinhardt

Condition: refurbished (used), Year of construction: 2010, XXL-Center RAS 75.06 - General technical data in mm: Bending length: 6400 mm Max. sheet thickness (400N/mm2): 1.5 mm Max. sheet thickness (750N/mm2): 1.0 mm Max. sheet thickness (200N/mm2): 2.0 mm Gripper claws travel range: 10 – 750 mm Clearance in front of the jaws up to: 300 ° Extendable loading tables: yes Gripper claws: yes Programming: automatic via Bendex Ppedox Hf Tvopfx Adlsr Machine dimensions incl. safety fence approx.: 9400 x 3000 Weight: 12.5 tons - Machine-specific data: Motor-driven; 400V, 50/60 Hz, 3-phase Year of manufacture: 2010 Condition: Will be completely overhauled - Images are examples -

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Ppsdpfx Aewp Rqfedljr Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, Mitre Saw REINHARDT RKP 160 S - used - Two-hand operation ----- Technical Specifications ----- Max. cutting height: 210 mm, Max. saw blade diameter: 600 mm, Infeed roller conveyor length: 3,500 mm, Outfeed roller conveyor length: 2,500 mm, Motor: 5.5 kW Ppodey Egxkepfx Adlsr

Condition: ready for operation (used), Year of construction: 2021, cutting length (max.): 2,700 mm, workpiece width (max.): 110 mm, Optimizing Cross-Cut Saw manufactured in 2021. This Paul Reinhardt SlimLine 110 features automatic cutting capabilities, accommodating wood lengths from 300 to 3000 mm and widths from 30 to 350 mm. It is designed for various wood types, including MDF and solid wood, with a maximum cross-section of 58 x 125 mm. If you are looking to get high-quality cutting capabilities, consider the Paul Reinhardt SlimLine 110 machine we have for sale. Contact us for further details. • Condition: Not rebuilt – sold without warranty • Cutting direction: right to left • Wood types: MDF, particleboard, solid wood, Kerto, plywood • Workpiece dimensions: Podsy Dru Ujpfx Adljpr • Length: 300–3000 mm • Width: 30–350 mm • Minimum cross-section: 15 x 30 mm • Maximum cross-section: 58 x 125 mm • Processing: automatic cutting • Working height: 900 mm • Electrical supply: 400 V / 50 Hz / 3 Ph • Main motor: 5.5 kW (400 VΔ / 690 VY, 50 Hz) • Control: Electronic control with Windows 10 and Beckhoff TwinCAT • Optimization: Full optimization without error cutting Additional equipment • Feeding with 3 buffer stations (infeed buffering/automation) • Software/add-ons: • Backlog monitoring • PALETTI Process Viewer • PALETTI Office

Condition: new, Year of construction: 2025, HIGH-PERFORMANCE WRAVOR BANDSAW, SPECIALLY DESIGNED FOR PRECISE AND EFFICIENT CUTTING OF LAMINATED BEAMS. IT ENSURES HIGH-QUALITY CUTS, MINIMAL MATERIAL LOSS, AND OPTIMAL PRODUCTIVITY. 📌 Key features: Ppodpevu Um Nsfx Adlor ✔ Precise cutting of laminated beams ✔ Automatic control for increased efficiency ✔ Robust and reliable construction

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Podotia Hhspfx Adlspr

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Ppedpfxevkbrqe Adljr Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Note: The control panel display is not functioning.

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm Pedpfsg Dgymox Adlspr number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Condition: used, Year of construction: 1996, Material dryer - Reinhardt Type: LTA 100 S Year of manufacture: 1996 Podpeyzgchofx Adlepr Operating temperature: 50–200°C

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min Psdspz H Hqspfx Adljpr max. pressure: 21MPa pressure ratio: 30:1

Year of construction: 1993, condition: good (used), Clamping carriage Braun WES fully hydraulic with auxiliary carriage with tracks Track width: 79 cm Ppedpfx Adjfuh Dysler good condition - immediately available Visit also my other advertisements. I am looking forward to your inquiry.

Condition: used, length 5650 mm height over floor 400 mm width 300 mm Ppsdpjynntyofx Adler total power requirement 2,9 kW Reinhardt conveyor belt type DB300 A for the efficient transport of wood, firewood, chips, and workpieces in woodworking. The robust construction enables a reliable and continuous conveying process in production lines, firewood production, and workshops.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Price for the tools: 97,500 EUR Ppjdpfx Aeu Ivc Nsdljr

Condition: new, Year of construction: 2024, Boring and inserting machines Rilesa Vlg 2200 new 2023 Make: Riles Model: Vlg 2200 Description: Condition: new Ppjdjgbpmhopfx Adljr Year: 2023 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Machine Tools equipment in Poland Subcategory: Drills Subcategory 2: Drilling machines Description DRILL DRILL WITH STORAGE 8 DRILLING UNITS TWO FRONT RIGHT AND LEFT, 3 UPPER AND 3 BACKS Year: 2023 new

Year of construction: 2000, condition: repair required (used), Feed transport equipment consisting of 1 piece conveyor belt and 1 piece roller conveyor ideal for (A) before planing machine with much hand saw (B) before cutting band saw or other saw (C) at the inlet before other machines Pjdpfx Asdi Nyksdlopr in the state as is and without electrical control