Planer

Rex Homs 310

Condition: good (used), Year of construction: 1990, Four-side planer REX HOMS-310 AD - German production - year of production 1990 - for wet wood TECHNICAL PARAMETERS: - planing width max. 310 mm - planing height on both sides 300 mm - planing height on four sides 100 mm - 35 mm spindle diameter - 2 x 11 kW shaft motors power - spindle motor power 2 x 7.5 kW - feed speed adjustable on the variator - feed speed 6-36 m / min - four upper pulling shafts - two lower pulling shafts Cpsdpohikpljfx Aa New - four auxiliary rollers in the table top - brake - minimum length of the element 600 mm Machine dimensions: - length 290 cm - width 170 cm - height 210 cm - weight ~ 3500 kg

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Cpjdpehclffofx Aa Njw Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min Cjdpfsfg E Hljx Aa Nopw table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle Cpodpfxsv Hwk Uo Aa Njw !! Sold on behalf of the customer!!

Condition: ready for operation (used), For turning plates, slices or trays up to 250 mm Ø Cpjdpjrh Hntjfx Aa Now Machine with vacuum clamping

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m Cpedeh Ayyqspfx Aa New technical inforamtion under subjet of correction

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: From stock 54634 Bitburg Cpjdpfx Aocqvhwsa Nsw - available immediately -

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Codpfx Asvwfqqsa Nopw

Condition: excellent (used), Gold anodized panels Working dimensions 2.5 x 1.1 m Electric heating Cpodpfou I N D Hex Aa Nsw Fully functional, tested You can call or write to us. We speak and write German and Russian. You can also send messages in English. 31.3.5

Condition: good (used), Year of construction: 1990, power: 5.5 kW (7.48 HP), cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, table length: 1,400 mm, Types:F 45 ,Machine nr:90-8-86 Cpedpfxjtxh Nio Aa Nsw