Lever plate shears

Rogi HS6

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay. Gusdpfx Ajwzmcbsf Toa

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: SI73, Technical data: 1x Demag KBK 1 column-mounted slewing crane, SWL 250kg Guedpfxowv N Eze Af Tja Safe working load at full outreach: 250kg / 0.25t Height: approx. 2.83m Underside of jib: approx. 2.3m Jib outreach: 3m Hook height: approx. 1.85m Total weight approx. 400kg including anchor plate 71x71cm With Demag PK chain hoist 250kg Includes pin, cable trolley, travel trolley, end cap, etc. Slewing range: 300° Connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, capacity 80-5000kg, please inquire See images Shipping by freight carrier or collection by appointment only

Condition: new, Wisniowski Industrial Sliding Gate 6 x 2 m List Price €16,800 Brand: Wisniowski Description Opening approx. 600 cm Leaf length approx. 800 cm Leaf height approx. 200 cm Including photocell and 1 transmitter Sliding direction from the street side, right, without galvanized base. Including motor and key Color: Black Photos for orientation Item Condition: New Financing through our bank is also possible. Gujdpfxjh I Nvbo Af Tsa komplett-konzept.leasingo.de Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, 2,000 running meters of construction profiles, U-shape Used goods, good condition, see pictures Galvanized Length per piece approx. 467 cm Profile 7.5/8 cm Material thickness approx. 3 mm Weight per piece approx. 43 kg Negotiated price: € 4.90 net/rm ex stock Available individually or in a package One package consists of 20 pieces - approx. 93.4 running meters Gedpfxjulwiqo Af Tjua Goods are in stock. Transportation possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: used, functionality: fully functional, machine/vehicle number: 9420358 IMA, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision VM – Medium Frequency Spot Welding System Manufacturer: ElmaTech GmbH Location: Morsbach, Germany System consists of: MF Inverter: MIDISpot Vision QSVM 9000/12000T Serial number: 9420358 IMA Weight: 95 kg MF Transformer Handheld Welding Gun: ELMA Vision VM Serial number: 9420356 IMA Weight: 35 kg Standard: EN500063 Description: This welding system from ElmaTech comprises a high-performance medium-frequency inverter (QSVM 9000/12000T) and an MF transformer handheld welding gun (ELMA Vision VM). It is specifically designed for professional resistance spot welding and is ideal for: - Automotive and body construction - Metal processing - Robot-based welding cells - Manual and semi-automatic spot welding workstations The medium-frequency technology (10 kHz) ensures: - High energy efficiency - Consistent welding results - Reduced electrode wear - Optimal process control Technical Data – MIDISpot Vision QSVM 9000/12000T (MF Inverter) Output: U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty cycle: 5 % Input: Voltage: 3~ 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision VM (MF Transformer Handheld Welding Gun) Output: U₂₀: 12.5 V Gusdpfx Aex Dch Aef Tea Current range: 0 – 15 kA Welding energy: 15 kAs Input: Uₙ: 560 V Frequency: 10 kHz Power: 30 kVA Duty cycle: 50 % Protection class: IP 21 Further details: Insulation class: F Cooling: WF (water cooling) Weight: 35 kg Typical Applications: - Spot welding of steel and stainless steel - Body construction / vehicle manufacturing - Industrial high-cycle production - Robot-supported welding processes - Repair and rework stations

Condition: used, functionality: fully functional, ElmaTech MIDISpot Vision QSVM 9000/12000T + ELMA Vision CM – MF Spot Welding System Manufacturer: ElmaTech GmbH System includes: MF Inverter: MIDISpot Vision QSVM 9000/12000T MF Transformer Spot Welding Gun: ELMA Vision CM Serial numbers: 9420357 IMA, 9420363 IMA Standard: EN500063 Condition: Used, technically flawless Description For sale is a complete MF spot welding system from ElmaTech, consisting of a powerful medium-frequency inverter (QSVM 9000/12000T) and the matching MF transformer spot welding gun ELMA Vision CM. This system is designed for industrial resistance spot welding applications. Typical areas of use include: Gusdpfx Ajx Au Tnef Toa - Vehicle manufacturing - Automotive suppliers - Metalworking - Robotic welding cells (e.g., KUKA, ABB, FANUC) - Manual spot welding workstations Thanks to its medium-frequency technology (10 kHz), the system offers high energy efficiency, fast control response, and excellent weld quality. Technical Data – MF Inverter QSVM 9000/12000T Output U₀: 560 V Frequency: 10 kHz Current range: 0 – 200 A Duty Cycle: 5% Input Voltage: 3~ / 400 V Frequency: 50/60 Hz Power: 75 kVA Protection class: IP 21 Additional Information Insulation class: F Cooling type: WF (water cooling) Weight: 95 kg Technical Data – ELMA Vision CM (MF Transformer Spot Welding Gun) Output U₂₀: 12.5 V Current range: 0 – 15 kA Energy / I₂max: 15 kAs Input Uₙ: 560 V Frequency: 10 kHz Duty cycle: 50% Power: 30 kVA Protection class: IP 21 Additional Information Weight: 35 kg Insulation class: F Cooling type: WF (water cooling)

Year of construction: 2001, condition: excellent (used), machine/vehicle number: BO844, DEMAG KBK crane canopy crane runway with dimensions approx. 8x5.5m (5.5m bridge) This crane is available several times ! Payload / lifting capacity 500 KG - 0,5to Technical data of the system: Crane runway made of Demag KBK2 rails Guodpfx Afsupvycj Toa System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. Crane is with internal power supply incl. 500KG Demag chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Condition: used, functionality: fully functional, machine/vehicle number: 380850, Double bench grinder for sale Gusdjx Aruvspfx Af Tea

Condition: new, Basic dimensions: Width: approx. 1,725 mm Depth: approx. 750 mm Height: adjustable from 750 - 1,250 mm Scope of delivery includes: 01x Workbench frame, new Frame color: grey Bench leg adjustment: 700-1,250 mm adjustable Guedpfx Afsv Tm Ics Tsa 01x Drawer cabinet, new Cabinet color: grey Door color: blue Lockable: yes Number of drawers: 3 pcs Drawer height: 115 mm 01x Worktop, new Material: multiplex Material thickness: 38 mm Total width: 1,725 mm Total depth: 750 mm Possible delivery time: 10-12 weeks Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for pick-up. Any additional transport or shipping of this item is subject to extra charges, which can be quoted separately by us depending on the delivery location and delivery scope.

Condition: excellent (used), Note: The pictures serve to clarify the material. - The workbench frames are commissioned unassembled; Guedpfjtk Ikmsx Af Tea - The production time is usually approx. 3 - 5 working days. Basic dimensions: Width: approx. 5,950 mm Height: approx. 940 mm Depth: approx. 850 mm The scope of delivery includes: 04x square tube, used Material color: sendzimir galvanized Profile height: approx. 900 mm Square profile: 140 x 140 x 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 5,650 mm 02x CS Sigma profile, used Material color: sendzimir galvanized CS Sigma profile: approx. 300 x 85 x 28 x 15 mm Material thickness: 2 mm Profile length: approx. 550 mm 01x chipboard, used Chipboard thickness: 38 mm Chipboard width: approx. 5,950 mm Depth of chipboard: approx. 850 mm Surface: possibly coated (possibly two-piece) 08x Mounting bracket, new Finish: sendzimir galvanized Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm Self-drilling screws, new Finish: galvanized Dimensions: 6.3 x 70 mm 32x screws: M12 32x nuts: M12 32x washers: M12 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.