Condition: used, mileage: 280,377 km, Year of construction: 2018, Serial number: VF640J560JB00xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19765 Specifications: - 2018 model - 280377 km - Automatic transmission - Euro 6 engine - 245 hp - 7.5 tons - Tires (see pictures) - Internal width: 2,463 m - Internal height: 2,502 m - Internal length: 6,492 m - Service history - Diesel heater - Heating in cabinets - Air conditioning/ac - Radio - Light - Ready for delivery Description: We are selling a Renault D7.5 4x2 box truck with heating in the box. The truck has a full service history and can be documented. Everything works as it should, according to the owner. Ready for delivery Km: 280377 HK: 245 Technical approved: Yes EU-approved until: 19.09.2025 Own weight: 5770 Total Weight: 7490 Payload: 1645 Width: 255 Length: 842 Dujb Etev U Scne Np Hjt Euro: 6 Gearbox: Automatic

Condition: good (used), Year of construction: 2013, operating hours: 6,161 h, lifting height: 6,200 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, mileage: 6,161 km, lifting capacity: 1,000 kg, net weight: 2,980 kg, This triplex reach truck from the brand JUNGHEINRICH comes from 2013 and is in good condition;Capacity of 1,000 kg;COMPACT model! Lifts to a height of 6,200 mm;Drive-through height is 2,300 mm;Equipped with FREELIFT and SIDESHIFT;6,161 hours on the counter;Adjustable forks in length (manual);The battery from 2022 is equipped with an external charger and an automatic filling system;Watch the video on YouTube Duebov N Hrae Et Np Het

Condition: good (used), 1 x Blue Seal electric griddle on mobile stand. Model - EP518-B. Serial number - 1863997. Electric supply - 400-415 V / 50-60 hz / 3 phase. Power - 18 kW / 24.5 A. Griddle dimensions - 1190mm long x 530mm deep. Overall dimensions - 1200mm long x 850mm deep x 1100mm high. Dujb Etowg At He Np Hst

Condition: used, Year of construction: 2018, operating hours: 10,657 h, Empty weight: 19.344 kg Dimensions (LxBxH): 875 x 272 x 332 cm Serial number: 969 Djb Et Npjwic Dwo Hsut Condition undercarriage: 50% Caterpillar 12M3 Motor Grader, E-rops cab with air conditioning, 6 cylinder turbocharged Caterpillar C9.3 ACERT Technology VHP Plus engine with 234HP (175kW), EPA Compliant, Tier 4 Final/EU Stage IV emission, 8F-6R powershift transmission, 14ft. (4.26 Mtr) moldboard with good cutting edge, Cat Grade Control, scarifier, front weight, centershift, differential unlock, joystick controls, 17.5R25 tyres, front and rear work lights, 19,344 Kg operating weight, CE marked. Machine comes straight out of work and is in clean condition. Trimble GCS900 GPS System available at extra costs. Inspections are welcome.

Condition: excellent (used), Superb condition, currently part of line in production with robotic top load machine picking cereal bars which are then loaded into this machine. Videos of line are available upon request. Can be seen running until near end of August 2023 Dusb Etsnmv Rae Np Hot

Condition: used, Year of construction: 2007, This late model Muller Martini Merit 'S' Trimmer is in excellent condition. Touch Screen Control Panel Book Infeed with Integrated Pre-Stacker Automatic Make Ready and Control System 2 sets of knives Standard Cutting Cassettes Nos 4-17 Knife changing device Deb Et Nswab Uvjp Hjut

Condition: used, Year of construction: 2017, Field of application: Construction Serial number: 1xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20023 Description: Djbov U R Ups Et Np Heut We have LDR Drilling Tower w/ hh20 hammer and s40 attachment for sale. Everything works as it should according to the owner. The hammer was replaced in 2020. The owner says it is about 7-8 years old (2017/2018). Ready for delivery.

Condition: used, Year of construction: 2006, operating hours: 737 h, 2006 | JLG | JLG Toucan-DUO (6 meters) | Used Vertical Mast Lift | 737 hours 📍Location: Netherlands, Loon op Zand 🚛 We Deliver to your destination – Estimate the shipping cost with our calculator! 💰 Buy Now for EUR 3100 or Make an Offer. Request payment at delivery for an affordable fee! (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 29 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Lift operates ok, but the small platform doesn't fully lift. The batteries are end of life. ❓Want the Full Inspection Report, Extra Photos & a Video? 🔍 Search this on Google for full details!: "35978 Equippo" 💡 Why Buy from Us? ✔ Fully inspected machines ✔ Delivered to your jobsite ✔ Money-Back Guaranteed Djb Et Npowhddpj Hjut ✔ Safe payment methods with possibility to pay at delivery ❓Got machines to sell? Contact us for a free evaluation

Year of construction: 2017, Condition: excellent (used), machine/vehicle number: 252382, 1 x Multivac double chamber vacuum packer. Supplied with blocker plates. Technical Specifications: Model - C500. Duob Eowg Ar Njt Np Het Serial number - 252382. Date of manufacture - 2017. Sealing bars - 4 x 675mm long. Distance between bars - 740mm. Vacuum pump - Busch R5 RA 0160 D. V max - 160 m3/h. Electric supply - 400 V / 50 hz / 3 phase. Rated current - 23 A. Overall dimensions - 1600mm long x 1100mm wide x 1360mm high (when lid is raised). Weight - 800 kg.

Condition: excellent (used), Year of construction: 2012, Ref:10716 . 2012 Morgana CardXtra Plus. The CardXtra Plus offers digital printers an accurate, low cost, easy to use multifunctional finishing device. Feeding sheets up to SRA3 size, can trim, cut and crease in multiple positions. Accuracy is the best available in the market. +/- 0.1mm accuracy versus +/- 0.7mm or +/- 0.5mm of more expensive units. Deb Ejrfwu Ret Np Hout As an example, an average run of 250 business cards can be finished in less than 2 minutes - a small job that would previously have needed 18 cuts on a guillotine! This versatile machine also has the ability to take SRA3 sheets, trim them to A3 and crease them to produce finished A4, 4 page brochures. Equally easily it can finish the job to A4 which can then be creased to make 4 page, A5 leaflets or multiple creases for a wide variety of applications.

Condition: used, total length: 3,000 mm, total height: 1,400 mm, total width: 1,000 mm, Weight: 700 kg - Documentation available: No - Transport dimensions: 3000mm x 1000mm x 1400mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dob Et Npswh Ai Re Hsut Glenn Smeets

Condition: used, Year of construction: 2009, 1 off MULLER MARTINI PANTERA PERFECT BINDING LINE Comprising:- Handfeed Station 12 x 1571 Feeders Drive Element Book Infeed 12 Clamp Binding Unit Touch Screen Control Milling & Spine Preparation Units Hot Melt Glue with Pre-Melter Hot Melt Side Glue with Pre-Melter Drum Cover Feeder with Scoring Nipping & Pressing Station Laydown Delivery Conveyor System 1 off MULLER MARTINI MERIT THREE KNIFE TRIMMER Automatic Book Infeed Belt Two Sets Knives Standard Cutting Cassettes Dob Ejwab Ucjt Np Heut Silicone Spray Refurbished, Cleaned, Checked and Painted Complete with:- Operations Manual, Spare Parts Manual, Electrical Drawing, Standard Tools and Accessories

Condition: used, mileage: 358,392 km, Year of construction: 2012, Serial number: YS2R6X4000207xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19944 Specifications: - 2012 model - Eu-approved until: 21.02.26 - 358,392 km - Euro 5 engine - Automatic transmission - 620 HP - Central lubrication - Diesel heater - Front suspension: steel - Rear suspension: steel - 6x4 - Tires (see pictures) - Air conditioning/ac - Leather seats - Radio Deb Et Npjv U R N Tj Heut - Lights - Video - Delivery by arrangement Description: We have a 2012 Scania R620 6x4 Tipper truck for sale. The car has just been Eu-approved to function as it should according to the owner. Errors and defects may occur as the car is from 2012. Delivery by arrangement Km: 358392 HK: 620 Technical approved: Yes EU-approved until: 21.02.2026 Own weight: 13500 Total Weight: 30000 Payload: 16425 Width: 255 Length: 742 Euro: 5 Gearbox: Automatic

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 15.10, total height: 2,500 mm, total width: 1,400 mm, total length: 2,400 mm, type of input current: three-phase, frequency: 50 Hz, control voltage: 415 V, ic systems automatic bottle filling machine with conveyor. Model 5.5.1 microblock Fills, caps and carbonates. Serious offers Trade. Deb Et Newg Sduop Heut

Condition: good (used), Year of construction: 2012, operating hours: 238 h, fuel type: electric, mileage: 238 km, lifting capacity: 1,500 kg, Obtained through trade-in  Dujb Et Npowhvm No Hst This electric pallet truck from the German brand Still comes from 2012 and is in good condition; The capacity is 1,600 kg Hours 238 hours Battery in moderate condition and equipped with an external charger

Condition: used, Year of construction: 1992, Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. Deb Et Npowhpc Re Hsut Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2013, total length: 3,800 mm, total height: 1,500 mm, total width: 1,000 mm, Weight: 1.500 kg Price: On request - Year: 2013 - Documentation available: No - CE mark available: Yes - Serial number: 230 - Voltage [V]: 400 - Power [kW]: 10.0 - Transport dimensions: 3800mm x 1000mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dueb Et Npewh Ai Dj Hjt Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Used Gauzing Station to suit Muller Martini Acoro A5 or A7. Debowab T Ss Et Np Hout Please contact us to confirm compatibility with your machine.

Condition: used, Please contact ATS Norway AS for more information Please provide reference number upon request: 19727 Description. Dob Et Npjv U R Hxj Hout 2 vang tilting stools for transporting wide steel plates and the like. Transported diagonally on a trailer. They have recently been sandblasted and varnished. Ready for delivery

Condition: used, Year of construction: 2011, Sewing machine with inline end sheet tipper Meccanotecnica Universe Year: 2011 For high quality digital print finishing. The UNIVERSE SEWING performs 3 operations in standard mode: Sheet feeding, creasing, folding and collating and stitching. The UNIVERSE performs 2 operations: Nipping and end sheet gluing. Configuration: • flat sheet feeder • pc Siemens with touchscreen • GigaLynx sheet control • folding and collating station • thread sewing machine Dusb Etju Utzys Np Het • belt delivery • transfer to the end sheet feeder • nipping press • end sheet feeder with Hotmelt nozzle gluing and ROBATECH premelter • belt delivery (counter approx. 9.700.000 mio. stitches) Technical specifications: speed plano sheet feeder: up to 300 plano sheet(A4)/min mechanical stitching speed: up to 50 folded sheets/min size range plano sheet max.: 420 x 640 mm size range plano sheet min.: 150 x 200 mm size range folded sheet max.: 420 x 320 mm size range folded sheet min.: 150 x 100 mm number of stitches max.: 10

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Dsbep R Rm Io Et Np Heut Wasino GLS-130AS 1984

Condition: used, Year of construction: 1996, Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996) Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dusb Eswhpbget Np Hst

Condition: used, Year of construction: 2016, 1 off Heidelberg VFZ-52 Mobile Knife Unit Dob Et Npewab Txj Hsut

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Duob Etswhpaie Np Hst Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Deb Et Njwhn Uxjp Heut