Condition: good (used), Year of construction: 2020, operating hours: 3,015 h, fuel type: electric, mast type: duplex, construction height: 1,315 mm, mileage: 3,015 km, lifting capacity: 2,000 kg, EXPECTED This electric stacker from the Still brand from 2020 is in good condition;The capacity is 2,000 kg;The stacker lifts to a height of XXX mm;Drive-through height 1,315 mm;Equipped with an INITIAL LIFT and therefore ideal on uneven floors;Only 3,015 hours on the counter;The battery is equipped with an automatic filling system and an external charger Make an appointment for a test drive.Video to followFINANCIAL LEASE POSSIBLE, ask for the conditions Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner* Fjb Ha Hewhld Rs Tqepg

Condition: new, Year of construction: 2024, SCHORR track dumper with box, tipping hydraulics and ride-on platform 500 kg load capacity 9.2 hp engine -- Self-propelled & powerful caterpillar drive -- Large & high-quality tipper body -- Folding ride-on platform fitted as standard -- Width of only 680mm -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR track dumper RR500DHKB has a hydraulic tilt drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body is effortless and requires little effort, even when fully loaded. With a robust trough made of thick sheet metal and removable side walls, the loading area can be enlarged if required, allowing Euro pallets or firewood to be transported, for example. SCHORR RR500DHKB minidumper - The advantages at a glance: -- Self-propelled & powerful caterpillar drive -- Large and high-quality tipper body -- Folding ride-on platform fitted as standard -- Removable side walls allow the loading area to be enlarged Technical data: Load capacity: 500kg Weight: 284kg Tilt drive: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Cable starter Length: 950mm Width: 680mm Height: 465mm Track width: 180mm Pump flow rate: 9 L/min. 3 forward gears 1 reverse gear Removable trough Type of packaging: Plywood box Packaging size: 167x77x113cm Our minidumper is extremely maneuverable and is often used on construction sites, in agriculture and forestry or in gardening and landscaping as well as for conversion work. Especially in combination with one of our mini excavators, the track dumper is a worthwhile investment. The excavated material can be easily transported into a container or similar with the mini dumper. Of course, we always have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Whether you want to have the minidumper delivered or collect it from our premises in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. Fpeb Ha Homv Eu Rj Tqsg In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our minidumpers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Year of construction: 2019, operating hours: 14,309 h, lifting height: 4,260 mm, fuel type: gas, mast type: duplex, fork length: 1,200 mm, total height: 2,720 mm, total length: 2,800 mm, total width: 1,200 mm, color: other, Empty weight: 4.503 kg Lifting capacity: 3.500 kg Fork dimensions: 1.200 x 950 mm - Lifting capacity: 3500kg Febowhpwbj Ha H Tqepg - Lifting height: 4260mm - Maximum fork width: 950mm - Number of wheels: 4 Wheels - Overhead clearance: 2720mm - Attachment: Side-shift, 4th valve to fork carriage - Options: Work lights, Verwarming, Full cabin - Fork length: 1200mm - Free lift: 0mm - Mast: Duplex - Year: 2019 - Documentation available: No - CE mark available: Yes - Serial number: 517388V00006 - Operating hours: 14309 - Drive: LPG - Transport dimensions: 2800mm x 1200mm x 2720mm (l x w x h) - Transport weight [kg]: 4503kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, overall weight: 8,311 kg, axle configuration: 3 axles, first registration: 04/2023, Year of construction: 2023, total width: 2,600 mm, total height: 2,650 mm, ID: 9329-306874 All our vehicles and the latest offers - Technical specifications THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit SCHMITZ black plastic fuel tank 245l 1 filling neck , BIO-Diesel proof 385/65R22.5 13550 mm 2600 mm 4009 mm Pallet rack for 36 Euro/ 24 ISO pallets ROTOS SCB running gear (disc brakes) 1 insulated ventilation flap in the left hand rear door at the top Fpjb Hjwhh Rgea H Tqeg

Condition: used, Year of construction: 2007, operating hours: 6,972 h, mast type: telescopic, fuel type: diesel, General information Field of application: Construction Serial number: Weights Fpjbjwh Iipo Ha H Tqsg Empty weight: 16.973 kg Functional Lifting capacity: 230 kg Working height: 2.820 cm Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: Outrigger Max. horizontal reach: 2290 m Transport dimensions (LxWxH): 12.2x2.49x3.05 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: good (used), Technical specifications for the pallet racking system: Rack system: Redirack Technical specifications for installation: Number of rack rows: 1 Length per rack row: approx. 14,048 mm Number of bays per rack row: 5 x 2,710 mm Number of levels plus floor level: 2 The scope of delivery includes: 6x pallet rack uprights, used Material color: Sendzimir galvanized Frame type: H Profile dimensions: 83 x 85 x 2.5 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled (screwed framework) 2,300 mm high 1,100 mm deep 20x pallet rack crossbeams, used Material color: yellow Box profile: 100 x 50 mm Hooks: 6 HK (hooks) Clear width: approx. 2,710 mm Max. load per pair of crossbeams: 2,000 kg, with uniform load. Distributed load 40x locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 12x leveling plates, used Design: Fully galvanized For leveling shelf supports that are installed on uneven ground 1x load plate with information on bay and compartment loads, manufacturer, and commission number Dimensions: 420 x 297 x 3 mm Fjb Haewhyqfe H Tqepg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Year of construction: 2018, operating hours: 3,797 h, lifting height: 2,844 mm, fuel type: electric, mast type: duplex, construction height: 1,915 mm, mileage: 3,797 km, lifting capacity: 1,400 kg, EXPECTED This electric duplex stacker from the Still brand from 2018 is in good condition;The capacity is 1,400 kg;The stacker lifts to a height of 2,844 mm;Drive-through height 1,915 mm;Equipped with a FREELIFT and an INITIAL LIFT and therefore ideal on uneven floors;Only 3,797 hours on the counter;The battery is equipped with an external charger and an automatic filling system;Make an appointment for a test drive.Video will follow!  FINANCIAL LEASE POSSIBLE, ask for the conditions  Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner* Fpsb Hjwhlcyja H Tqsg

Condition: excellent (used), Vötsch Type: VC³ 4018 Vötsch Climatic Test Chamber VC³ 4018 Air-Cooled Converted to R452a Technical Specifications: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Plug-in included in standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.5 K Temperature homogeneity over space ± 0.5 to ± 1.5 K Temperature rate of change Heating 4 K/min Cooling 4 K/min Max. heat compensation 2300 W Data for climatic tests: Temperature range +10 to +95 °C Dew point range -3 to +94 °C Humidity range 10 to 98 %RH Temperature deviation over time ±0.1 to ±0.3 K Temperature homogeneity over space ±0.5 to ±K Humidity deviation over time ±1 to ±3 %RH Heat compensation 400 W Data for operation: Test room lighting: halogen bulb 2 x 24V, 50W 3/N/PE AC 400V±10% 50 Hz Rated power 4.1 kW Rated current 14 A Weight: 470 kg For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) Febjvpt Ino Ha H Tqepg We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2014, total height: 2,030 mm, total width: 900 mm, total length: 2,000 mm, outer dimension width: 900 mm, Empty weight: 610 kg - Year: 2014 - Documentation available: Yes - CE mark available: Yes - Control: Conventional - Motor power: 2.2kW - Table width: 430mm - Table length: 1050mm Fpjb Haswhmmms H Tqjg - Ram length: 85mm - Min. stroke: 0mm - Model: Hydraulic - Max. stroke: 235mm - Number of columns: 2 - Height adjustment: 1000mm - Power: 100.0ton - Transport dimensions: 2000mm x 900mm x 2030mm (l x w x h) - Transport weight [kg]: 610kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, overall weight: 8,351 kg, axle configuration: 3 axles, first registration: 04/2023, Year of construction: 2023, total width: 2,600 mm, total height: 4,010 mm, ID: 4898-306708 All our vehicles and the latest offers - Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck, BIO-Diesel proofing. Tires 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unloaded) - 4009mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). 1 insulated ventilation flap in the left hand rear door at the top Fsb Hajwhh Rtj H Tqspg

Condition: good (used), Flame cutting machine, torch, oxy-fuel cutting machine, cutting torch, welding torch, hand cutting torch, welding set -Zinser: Burner set in a metal box -Burner sizes: No. 1 to No. 5 (max. 9 mm) -Accessories: see pictures -Dimensions case: 480/230/H90 mm Fpob Ha Hefwx Uvo Tqjg -Weight: 6 kg

Condition: ready for operation (used), Hydraulic shear LVD HST-C 40/8 Year of construction 2005 Serial number 29992 Technical specifications Max sheet thickness 8 mm Cutting length 4050 mm Back gauge range 1000 mm Fpob Ha H Towaa T Reqeg Cutting angle 0.5°-2° Blade clearance 0,05-1.2 mm Number of strokes per min 10-40 Number of hold dawns 21 motor 15kW weight 13000 kg oil 250l Voltage 3 x 380V Options included : Command control PNC20 for adjustment of back gauge, cutting angle and blade clearance Security norms CE 1 square arm from support L1500mm 1 extra support L1500mm

Condition: good (used), Year of construction: 2016, operating hours: 392 h, lifting height: 4,716 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, mileage: 392 km, lifting capacity: 1,400 kg, EXPECTED Fpsb Ha Hewhk T Re Tqeg This electric TRIPLEX stacker from the Still brand from 2016 is in good condition;The capacity is 1,400 kg;The stacker lifts to a height of 4,716 mm;Drive-through height 2,065 mm;Equipped with FREELIFT;Equipped with INITIAL LIFT and therefore ideal on uneven floors;ONLY 1,392 hours on the counter!The battery is equipped with an automatic filling system and an external charger;Make an appointment for a test drive;  Video to follow FINANCIAL LEASE POSSIBLE, Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and a modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the one-size-fits-all solution for every application. The display is user-friendly. Intended Use: This heat seal press is particularly suitable for industrial applications that require precise temperature control and the ability to use smaller sealing plates (140 x 140 mm). Common applications include applying patches, transfers, or embroidery to textiles. Special Features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as other industries that require high-volume, medium- to high-temperature processing. High flexibility: Fpsbjwif Rgo Ha H Tqjg The temperature range of 25 to 210°C and the adjustable timer from 1 to 240 seconds offer flexibility for a wide variety of materials and applications. Efficient: The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat seal press with the following technical specifications: Technical Data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (mm): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, Functionality: fully functional, machine/vehicle number: 8520-7-10558-FA, measuring range X-axis: 2,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 2,500 mm, Equipment: documentation/manual, Purchased brand new in 2023 for a project but no longer required. Only used for a number of hours - approx 50hrs. Tripod Table / Machine mounting ring Carry case Includes Dell Mobile Precision Workstation 7780 (Laptop of value £4,486.00) with PC DMIS 7-Axis Arm with 2.5 m Measurement Volume, Includes: • Absolute Encoders and SMART Sensors • Zero-G Counterbalance with SmartLock and HomeDock • Wrist Display • Haptic Feedback • Bluetooth wireless interface for wireless accessories • Spin Knob and Spin Grip • Base Plate with Mounting Ring • TESA TKJ Ball Probes: 3 mm Ruby / 6 mm Ruby / 15 mm Steel • Certified Length Standard • RDS Maintenance and Interface Software • Travel Case and Accessory Case • Power supply • Hexagon Dust Cover • ISO 10360-12 Certificate Removable Pistol Grip for Probing in Standard Mode (with Pistol Grip) or in Compact Mode (without Pistol Grip) Includes: • Nose Cone • 3 sizes of Pistol Grip Handles: Small / Medium / Large • The medium size grip is mounted on to Pistol Grip main body • Certified Sphere for Probing Wireless Pack (CP-W) shipped fully configured and mounted on t he arm. The CP-W provides: • Single Ethernet connection for all touch probes, tube probes and scanners (HP-L-8.9, HP-C-V3D, AS1, RS6, RS5 and RSSQUARED) • Wireless connections for all touch probes, tube probes, AS1, RS6, RS5 and RS-SQUARED. (HP-L-8.9 and HP-C-V3D do not support wireless connections). • One Ethernet to USB adapter, for users who prefer a USB connection to Ethernet • Battery operation available (with hot-swappable batteries) Includes: • Wireless Pack CP-W • ODU-Ethernet Cable - 3m • Ethernet Gigabit adapter • Two rechargeable batteries Note: CP-W is certified to IP54 when mounted on the arm MST138 Portable Precision Carbon Tripod Precision carbon tripod for Absolute Tracker AT930/960, ATS600 or Absolute Arm. The MST138 has the following features: - Foldable tripod with carbon legs - Height scale on center leg - 3x integrated fixed positions for AT Controller/ATS Controller or external batteries MPB25/MPB100 Feb Ha H Tjwhwdpoqspg - 3.5x8’’ thread to mount Absolute Tracker AT930/AT960, ATS600 or Absolute Arm - Adjustable height: 79 cm – 131 cm (31.1’’ – 51.6’’) - Weight: 13.5 kg (29.8 lbs) Compatibility: AT930, AT960, ATS600, AT403 TM6100A with MSI140 adaptor

Condition: used, overall weight: 8,311 kg, axle configuration: 3 axles, first registration: 04/2023, Year of construction: 2023, total width: 2,600 mm, total height: 2,650 mm, ID: 9295-306876 All our vehicles and the latest offers - Technical specifications THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit SCHMITZ black plastic fuel tank 245l 1 filling neck , BIO-Diesel proof 385/65R22.5 13550 mm 2600 mm 4009 mm Pallet rack for 36 Euro/ 24 ISO pallets ROTOS SCB running gear (disc brakes) 1 insulated ventilation flap in the left hand rear door at the top Feb Hswhh Rmea H Tqopg

Condition: used, total width: 2,100 mm, total length: 4,500 mm, total height: 2,200 mm, outer dimension width: 2,100 mm, outer dimension length: 4,500 mm, Empty weight: 5.150 kg Veneer Press Fob Ha Hswhlvmo Tqepg Italpresse XL/8-S Dimensions 3500x1300mm max. pressing pressure 120 tons oil boiler max. 120 degrees, 18kW 8 cylinders Complete with  Computerized interface touch screen TS/400 Mylar coover for upper and lower platen EFC electronic flatness control Exclusion of the leftmost row of cylinders CE Safety standards 400V 50HZ.  Dimensions 4500 x 2100 x 2200mm LxWxH - about kgs. 5.150= - Documentation available: Yes - CE mark available: Yes - Serial number: 203831024 - Press drive: drijving_pers. - Transport dimensions: 4500mm x 2100mm x 2200mm (l x w x h) - Transport weight [kg]: 5150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2013, operating hours: 4,321 h, fuel type: electric, mast type: triplex, construction height: 2,320 mm, mileage: 4,321 km, lifting capacity: 1,600 kg, EXPECTED MULTIPLE IN STOCK This electric TRIPLEX stacker from the ATLET brand is from 2013 and is in good condition;The stacker has a capacity of 1,600 kg;Lifts to a height of XXX mm;The drive-through height is 2,320 mm;4,321 hours on the counter;The battery from 2023 equipped with an external charger;Order the stacker via our webshop or make an appointment for a test drive!Watch the video on YouTube Fpobowhk Smo Ha H Tqjg

Condition: used, overall weight: 8,311 kg, axle configuration: 3 axles, first registration: 04/2023, Year of construction: 2023, total width: 2,600 mm, total height: 2,650 mm, ID: 4866-306875 All our vehicles and the latest offers - Technical specifications THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit SCHMITZ black plastic fuel tank 245l 1 filling neck , BIO-Diesel proof 385/65R22.5 13550 mm 2600 mm 4009 mm Pallet rack for 36 Euro/ 24 ISO pallets ROTOS SCB running gear (disc brakes) 1 insulated ventilation flap in the left hand rear door at the top Fpob Ha H Tewhh Raoqeg

Condition: used, Year of construction: 2009, Price: On request Undercutting crosscut saw Weinig Dimter Opticut S 90 Serial no. 4421.24 Built in 2009 Automatic feed system Up to 60 m/min Three-phase current 400V / 50Hz Control voltage 24VAC / 230VDC Power 20kW Rated current 40A Fuse 50A Dimensions machine 2000x1400x1650 mm (LxWxH) Dimensions input table 7450x2100x1100 mm (LxWxH) Dimensions output table 4900x2400x1400 mm (LxWxH) Dimensions total setup 16300x2700x1950 mm (LxWxH) Including fencing and waste discharge belt  Feb Ha Hewhlvgo Tqjpg Available immediately - Year: 2009 - Documentation available: No - Serial number: 4421.24 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2018, operating hours: 1,431 h, lifting height: 4,440 mm, fuel type: gas, mast type: triplex, construction height: 2,125 mm, mileage: 1,431 km, lifting capacity: 2,500 kg, EXPECTED Fob Ha Hewhk Ems Tqepg This TRIPLEX LPG forklift from the brand STILL is in good condition and comes from 2018;Capacity of 2,500 kg;Lifts to a height of 4,440 mm;Equipped with FREELIFT and a SIDESHIFT;Drive-through height is 2,125 mm;Forks 1,200 mm;ONLY 1,431 hours on the counter;Video to followFINANCIAL LEASE POSSIBLE Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner*

Condition: good (used), Year of construction: 2018, operating hours: 2,038 h, lifting height: 4,765 mm, fuel type: gas, mast type: triplex, construction height: 2,160 mm, mileage: 2,038 km, lifting capacity: 2,000 kg, EXPECTED Fsbswhk D Ns Ha H Tqepg This triplex LPG forklift from the brand STILL is in good condition and comes from 2018;Capacity of 2,000 kg;Lifts to a height of 4,765 mm;Equipped with FREELIFT and a SIDESHIFT;Drive-through height is 2,160 mm;Forks 1,000 mm;ONLY 2,038 hours on the counter;Video to followFINANCIAL LEASE POSSIBLE Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner*

Condition: good (used), Year of construction: 2017, operating hours: 9,495 h, lifting height: 6,040 mm, fuel type: electric, mast type: triplex, construction height: 2,725 mm, mileage: 9,495 km, lifting capacity: 3,000 kg, EXPECTED This TRIPLEX forklift from the brand STILL comes from 2017 and is in good condition;The forklift has a capacity of 3,000 kg;Lifts to a height of 6,040 mm;The forklift is equipped with a FREELIFTEquipped with a SIDESHIFT;Drive-through height of 2,725 mm;Forks 1,200 mm;The battery is equipped with an external charger;Make an appointment for a test drive;Video to followFINANCIAL LEASE POSSIBLE, ask about the conditions Calculation is subject to credit acceptance and interest and rate changes, final calculation via our external partner Febowhk A Sj Ha H Tqjpg

Condition: good (used), Year of construction: 2013, operating hours: 8,036 h, lifting height: 4,765 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, mileage: 8,036 km, lifting capacity: 2,000 kg, EXPECTED Fjbewhkzzs Ha H Tqopg This triplex electric forklift from the German brand STILL is from 2013 and is in good condition;Capacity is 2,000 kg;Lifts to a height of 4,765 mm;Drive-through height is 2,160 mm;Equipped with a FREELIFT and SIDESHIFT;Forks are 1,200 mm;Battery from 2024 is equipped with an external charger;Video will follow

Condition: good (used), Year of construction: 2013, operating hours: 10,417 h, lifting height: 4,765 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, mileage: 10,417 km, lifting capacity: 2,000 kg, EXPECTED This triplex electric forklift from the German brand STILL is from 2013 and is in good condition;Capacity is 2,000 kg;Lifts to a height of 4,765 mm;Drive-through height is 2,160 mm;Equipped with a FREELIFT and SIDESHIFT;Forks are 1,200 mm;Battery from 2024 is equipped with an external charger;Video will follow Fpsb Ha Hswhkzho Tqog