Universal folding machine

SCHRÖDER MAK II 2000-3.0

Condition: new, Isitan Hydraulic 4 Rolls Round Bending Machine 4R HMS 1270 x 130 Upper and lower roll driven Hydraulic side roll infeed 3 digital displays Hydraulic folding bearing Hardened rolls Fsdpoiffwqofx Abuopc Conical bending device Separate control panel Useful length : 1270 mm Top roller diameter : 130 mm Side rolls diameter : 130 mm Motors total power : 3,3 KW Working speed : 5m/min. Weight : 2150 kg Dimensions (mm) : 3200 x 1150 x 1110 (L x W x H) Bending power : 5mm Bending capacity : 4mm All bending capacities are calculated on the basis of 250 N/mm2 yield strength Material ( ST 37 - ST 42 mild steel )

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm weight: 0,9 t Fpsdpfx Abjcq Rv Uousc 2 grinding wheels with flange 8 collets 1 coolant tank mechanical feed with fixed stop The cardan shaft for the workpiece drive is worn out

Condition: used, Year of construction: 1991, sheet width 2050 mm plate thickness 3.5 mm Fpodpfxsw U U Uko Abuec distance between columns 2100 mm stroke of upper beam 250 mm adjustment UW 80.0 mm work height max. 920 mm total power requirement 6.0 kW weight 2910 kg range L-W-H 3185 x 875 x 1450 mm Features: - Robust electric-driven folding machine - With dynamic, powerful drive motors - Manual/automatic operation selectable - Control panel, right front - Bending angle preselection via electric potentiometer - Manual lower beam adjustment - 1x used upper tool rail - 2x used lower tool rails - 1x freely movable double foot switch - Original operating instructions

Condition: good (used), Year of construction: 2000, total height: 47,000 mm, total width: 27,000 mm, total length: 25,000 mm, table width: 1,000 mm, table length: 1,800 mm, overall weight: 43,000 kg, ram plate width: 600 mm, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Fpodpfx Abjtiwgisusc Separate control cabinet Ritta Side passages Ground level installation

Condition: refurbished (used), Year of construction: 1988, - Refurbished in 2022 - Heidenhain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with extendable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearshift - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measurement - Collision protection coupling in the Y and Z axes - Built in 1988 - Including tool holders, drilling/milling tools, and tool carriage Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually movable on spindle block: 150 mm Main drive: - Pole-changing Three-phase brake motor: Manual gearbox with forward/reverse rotation - Power: 3.7 / 4.4 kW - Work spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) Fpodpowhk Ubjfx Abuoc - Tool clamping: Disc spring package - Tool release: Hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z-axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z-axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (including safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor load: 3000 kg/m²

Year of construction: 2001, condition: ready for operation (used), A Schechtl swing bending machine for sheet metal processing is available. Working length: 2040mm, opening height: 140mm, bending capacity: 3mm, bending speed: 50°/s, back gauge: 750mm. Machine dimensions X/Y/Z: approx. 3000mm/750mm/1250mm, weight: approx. 2750kg. On-site inspection is possible. Fpedpfx Abox Hz Ntsusc

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Fjdpfxog S R Twe Abuepc rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: as good as new (ex-display), Year of construction: 2026, SRF master figure left 2 m suction arm Scope of application Fedpodqzbrsfx Abuspc Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: ready for operation (used), Year of construction: 1998, pressing force: 250 t, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, stroke length: 150 mm, power: 37 kW (50.31 HP), Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Fpsdpfxory Trps Abuec Can be loaded by crane on collection against payment. Transportation can be arranged. Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Year of construction: 1984, condition: used, machine/vehicle number: 57051/4, Manufacturer: Rhode & Doerren mountain (May) Model: SS 40 U M. Nr: 57051/4 Year of construction: 1984 Weight: 950 KG General information / technical data: Fjdpfjc Nv S Aex Abujpc used drill grinder from German production for 2, 3 and 4-bladed tools in good condition. Diameter range: from 5mm to 40mm Wekzeuglaenge: 500mm Point angle: from 80° to 160 ° Clearance angle: of 1 ° 30 ' up to 10 ° Wheel: 210 x 127 x 50mm (disc) Tool body: 2, 3 and 4 edged drill and countersink Tools grinding direction: cutting left & right Dimensions machine: (l x w x h) 1350mm x 1100mm x 1400mm Power supply / control voltage: 380Volt 50 HZ / 220V motor power / total power: 2,2 KW / 2.55 KW Optional accessories: • 2 wheel shots with grinding wheel • 8 piece collet chucks for drill bit recording make Forkardt • 6 piece MK recording & drill extensions • Coolant system • Documentation of the machine & electric schematic Comments: The machine is with us in the camp under power and is ready for a demonstration by arrangement.