Horizontal block press

Schweizer Fabrikat BP 5000

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Large rotor diameter of 368 mm with 64 blades 37 kW motor Engine and gearbox replaced 6 years ago Tsdpfx Anoxwwvuelsb

Year of construction: 2008, condition: ready for operation (used), A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible. Tsdpfx Anoyddyzelob

Condition: used, Year of construction: 2004, fuel type: gas, weight max. in kg 2500 kg stroke 3050 mm fork length 1200 mm load centre 500 mm turning radius 2444 mm Tsdpfx Asr Dg H Eonljb driving speed 22 km/h guage width vorne 1008 mm guage width hinten 932 mm weight of the machine ca. 3,64 t dimensions of the machine ca. 3,8 x 1,25 x 2,25 m

Condition: good (used), Auriol M500VBEX cooking kettle Serial: 3429 Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph Tjdpfsnbd S Tex Anlob

Condition: used, Year of construction: 1991, Flottweg three-phase decanter, Z4D-3/441, last used in a fruit juice plant. Inner drum diameter: 420 mm Inner drum length: 1245 mm Drum wall thickness: 10 mm The medium to be separated is fed into the hollow center axis of the decanter. Centrifugal force causes the solids to collect on the drum shell. A cylindrical-conical screw conveyor transports the ring of solids to the discharge openings, where it is ejected into the solids housing. The two liquid components separate according to their specific density and form two hollow liquid cylinders. The diameter of the liquid rings can be adjusted using a peeling disc and overflow weir. One of the two phases is discharged without pressure and one is discharged under pressure via the paring disc. The moisture content of the solids and the purity of the liquids can be controlled by: - Varying the phase separation discs and paring diameter - Decanter speed - Screw speed Additional title: 3-phase decanter Max. bowl speed: 4000 r/min Max. sediment-density: 1 g/cm³ Max. ambient temperature: 100 °C Mass moment of inertia: 15.5 kgm2 with an empty drum Tjdpfx Ansyr Iccolob Weight: 2250 kg Material: housing from stainless steel 1.4301 (AISI 304); drum made of high-strength cast stainless steel 1.4463 Position: free standing Base construction: Horizontal decanter drum in steel frame, on square tube frame with dome feet Features: Base with rubber mountings, electric motor (Loher 180 M, 22 kW)

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. Todjua Tbwjpfx Anleb SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: like new (used), Year of construction: 2011, OMET Varyflex VF1 Year of manufacture: 2011 Web width: 850 mm Printing process: Flexo + Rotogravure combination line Condition: Used – very good condition Location: Europe _____ Machine Configuration • 8 x UV flexo printing units (equipped with new UV lamps, LED-ready) • All flexo units in ATEX execution (suitable for solvent-based inks) • 1 x rotogravure unit (compatible with solvent- and water-based inks) • 1 x die-cutting unit (530 mm) • In-line slitting system • Double turret rewinder • Turn bar (web turning system) • Hot air dryer on first printing unit • Cold seal trolley (movable) • Cold foil unit (cassette type, positionable on any unit) _____ Equipment & Tooling • Extensive anilox roller package • Sleeve system (well maintained) • Tooling in very good condition Optional (available upon request): • Omet plate mounter • Bimec slitter rewinder 1200 mm (almost new condition) _____ Technical Highlights & Advantages The OMET Varyflex VF1 is a highly versatile production platform designed for both label and flexible packaging applications. Key advantages: Tsdpfx Anjyyn Hfoljb • Wide web format (850 mm) – ideal for high-volume production • Hybrid configuration (flexo + rotogravure) for maximum flexibility • ATEX design allows use of solvent-based inks • LED-ready UV system for future energy efficiency upgrades • Modular configuration with movable units (cold foil/cold seal) • Excellent condition with recently updated electronics (PLC, drives, control cabinets) • Proven application: previously used for polyethylene-coated materials (80–90 g/m²), ensuring reliability in demanding environments This machine offers an outstanding balance between performance and flexibility.

Condition: good (used), Auriol cooking kettle Stainless, 400l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph Todpfxonbd Ryo Anleb

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Tjdpfx Aexmkctenljb

Condition: excellent (used), functionality: fully functional, Trendelkamp Separation Table / Vibrating Sieve Machine – 3 Fractions For sale is a Trendelkamp separation table, model TK-K60/85, weight 200 kg. This machine is designed for the precise separation of bulk materials into three fractions by means of vibration and screening. Technical data: • Manufacturer: Trendelkamp Stahl- und Maschinenbau GmbH + Co. KG • Model: TK-K60/85 • Weight: approx. 200 kg • 3-fraction separation • Driven by electric motor with unbalance drive • Robust steel construction, screen decks made of stainless steel • Screens can be easily replaced upon request (different mesh sizes available) Areas of application: Ideal for plastic granulate, recycling materials, pellets, bulk materials, and other applications requiring separation into three size classes. Tsdjw Ip Dtopfx Anleb The machine is immediately ready for use and in good condition.