Circular sawing machines

SCM SI 450 E

Condition: excellent (used), Year of construction: 2001, Sliding Table Saw Manufacturer: SCM Type: SI 450 E Year of Manufacture: 2001 Carriage Length: 3,200 mm Cutting Width: 1,340 mm Cutting Height: approx. 150 mm Cutting Height at 45°: 106 mm Dcelhcsv S Uvlsdwwji Motor Power: 7.5 kW Max. Saw Blade Diameter: 450 mm Speeds: 2,350 - 5,200 rpm Speed Adjustment: Variable - Continuous Height Adjustment: Electric Angle Adjustment: Electric Scoring Device: No Motor Brake: Yes

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Used SCM SI 450 E from 2001 in good condition. The machine is CE marked. See further specifications below: Technical data: Delhcdwormmz Iewsci Working length 3200 mm Cutting width on parallel fence: 1500 mm Tilt of saw unit: 45 degrees Max. cutting height at 90 degrees with 450 mm blade: 150 mm Max. cutting height at 45 degrees with 450 mm blade: 106 mm Blade speeds: 2500/3500/5000 rpm Motor size: 7.5 HP, 5.5 kW

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: AB141760, cutting width (max.): 1,500 mm, cutting width at rip fence: 1,500 mm, power: 7.5 kW (10.20 HP), sliding table length: 3,200 mm, Equipment: scorer, SCM sliding table saw, model SI 400 E Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Djlotwp Epohcdwwoci Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit manual adjustment electric height adjustment electric swivel with siko display Suction connection 1x100mm 1x120mm

Condition: used, Technical Specifications: • Carriage length: 2600 mm • Max blade diameter: 350 mm • Equipped with scoring unit • Tilting blades Dcelhcewx Iw Ijdwwsi

Condition: excellent (used), Year of construction: 2017, SCM Linvincibile Si'X panel saw sliding table 380 cm, blade tilt in both directions +45 to -45 degrees, blade tilt and height motorized adjustment, rip fence motorized on the right side up to 1500 mm, Djlhcdweww Hi Hjweci scoring unit 0.75 kW, 2-axis electrically adjustable, dimensions: diameter 160 mm, bore 20 mm, motor 7.5 kW with frequency inverter, max. blade diameter 550 mm, digital display on the fence on the sliding table, mitre-adjustable sliding table, used machine, very good condition, high-spec SCM saw model.

Condition: used, total height: 1,800 mm, total length: 1,650 mm, total width: 1,550 mm, - Table length [mm]: 1070 - Table width [mm]: 1360 - Max. adjustable angle [°]: 45 - Roll table present: Yes - Documentation available: No - Transport dimensions: 1650mm x 1550mm x 1800mm (l x w x h) - Transport packages [pcs.]: 1 Dolhcdowvabajwwjci Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 2014, MAIN FEATURES EDGER: HIGHEST CUTTING QUALITY GUARANTEED IN THE LONG TERM OPERATOR SUPPORT: ONE SINGLE CUT – THE RIGHT SAWING UNIT: FOR A PERFECT CUT Technical data SI400 EP CLASS Max cutting height at 90° (mm) 140 with blade 400mm Max cutting height at 45° (mm) 97 with blade 400mm Saw blade tilt (degrees) 45 Lifting and tilting of the saw unit programmed Control/working height indicator Ready Saw blade speed (rpm) 3000- 4000- 5000 Scoring unit speed (rpm) 8500 Main motor power [S6 -40%] kW (HP) 7(9.5) Hz50 Scoring unit power [S6 -40%] kW (HP) 0.9(1.2) Hz50 Format cuts: - with carriage 3200 (mm) - with carriage 3800 (mm) 3200x3200 3800x3200 Cutting width with parallel stop (mm) 1270 Extractor nozzle diameter: - on the frame (mm) - on the sawblade guard (mm) - on the riving knife (mm) 120 100 60 Standard equipment and accessories - 10 year warranty on the sliding system of the saw carriage - Sliding saw carriage in anodized aluminum profile with guide made of hardened, ground and flanged steel guides - Scoring unit with independent motorization adjustable from the outside and stops for easy sawblade positioning - "READY" Electronic control: 2-axis control (3rd axis on request) with:* Height adjustment and inclination of the saw unit (parallel stop control on request)* Management of tool data with automatic correction of the cutting height in relation to the inclination angle of the Saw blade * Manual, semi-automatic and automatic mode with 99 storable work programs* Additional functions: Calculator and hour meter - Eccentric clamping device - Trimming frame for quick positioning of the stop for miter cuts - Table extensions in the outfeed - Trimming carriage length 3200mm - Manual parallel stop with reading of the stop position via ruler with slide on 50mm steel guide and micrometric adjustment - Motor with direct connection with push buttons Safety/Protection - Emergency stop button on the front - Emergency stop button on the side in the parallel stop area (CE version) - Micro circuit breaker on the blade cover (CE version) with quick release - Thermal protection switch - Saw blade guard mounted on the riving knife (version with guards) with suction nozzle, 60mm diameter - Saw blade pendulum protection (CE version) - Automatic motor brake on the main saw blade (CE version) - Lockable main switch - 110V auxiliary circuit - C.E. Declaration of conformity (CE version) SI400 EP Class - sliding table saw with electronic control - CE version 1 pc. Volt 400 EU 1 pc. Frequency 50 Hz 1 pc. Version "READY 3 UP" (CE and USA/Canada) 1 pc. Complete with: - motor-driven parallel stop with electronic programming * position display via magnetic tape * continuous adjustment via switch * incremental adjustment option * automatic set up * electronic reading of the stop position * round guide, 50 mm diameter * swiveling device for stop under table * pneumatic blocking device * sensor for the automatic stop position, according to the dimensional adjustment of the stop profile (high/flat position) - on/off switch for the motors for the main saw blade and scoring unit integrated in the edger carriage - swiveling control panel easily accessible by the operator "Quick Lock" format stop 1 pc. Edger frame with simultaneous positioning, blocking or release. Complete with extendable roller for workpiece support, 2400 mm total length. Miter stop with automatic L Dcelhcdjwv Evpjwwsi

Condition: new, Electric Circular Crosscut Saw – Brand New, Ready for Delivery AVAILABLE IN BOTH ELECTRIC AND MANUAL VERSIONS Electric Version • Max cutting height at 90° (mm): 140 with 400mm blade • Max cutting height at 45° (mm): 97 with 400mm blade • Blade tilt (degrees): 45 • Electric blade lifting and tilting with digital display • Main blade rotation speed (rpm): 3000 - 4000 - 5000 • Scoring blade rotation speed (rpm): 8500 • Main blade motor power [S6 -40%] kW (HP) Hz50: 7 (9.5) • Scoring blade motor power [S6 -40%] kW (HP) Hz50: 1.3 (1.7) • Squaring capacity: - with 3200 mm carriage: 3200 x 3200 mm • Cutting width at parallel guide (mm): 1270 • Suction port diameter: - at base (mm): 120 - at suspended guard (mm): 100 - at splitter knife (mm): 60 Dcolhcdjwu Tliewwji • Weight (kg): 1070 Manual Version • Max cutting height at 90° (mm): 140 with 400mm blade • Max cutting height at 45° (mm): 97 with 400mm blade • Blade tilt (degrees): 45 • Manual blade lifting and tilting • Main blade rotation speed (rpm): 3000 - 4000 - 5000 • Scoring blade rotation speed (rpm): 8500 • Main blade motor power [S6 -40%] kW (HP) Hz50: 7 (9.5) • Scoring blade motor power [S6 -40%] kW (HP) Hz50: 1.3 (1.7) • Squaring capacity: - with 3200 mm carriage: 3200 x 3200 mm • Cutting width at parallel guide (mm): 1270 • Suction port diameter: - at base (mm): 120 - at suspended guard (mm): 100 - at splitter knife (mm): 60 • Weight (kg): 1070

Condition: used, Year of construction: 2010, total length: 3,500 mm, total width: 2,200 mm, total height: 1,500 mm, Weight: 1.050 kg Price: On request Djlhcswrzfredwwsci - Saw blade motor power [kW]: 5.5 - Max. cutting length [mm]: 3200 - Max. cutting height [mm]: 130 - Parallel stop displacement [mm]: 1330 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Pre-cutter present: Yes - Spindle speed pre-cutter [rpm]: 8500 - Pre-cutter saw blade diameter [mm]: 120 - Arbor pre-cutter saw blade diameter [mm]: 20 - Digital readout: Yes - Cutting height at 45° [mm]: 98 - Year: 2010 - Documentation available: No - CE mark available: Yes - Serial number: AB/201029 - Voltage [V]: 400 - Current consumption [A]: 14 - Transport dimensions: 3500mm x 2200mm x 1500mm (l x w x h) - Transport weight [kg]: 1050kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Year of construction: 1995, Sliding carriage: 3000 mm Motor: 5.5 kW Scoring unit Cutting width: 1280 mm Saw blade diameter: max. 300 mm Speed: 4000 rpm Scoring saw blade diameter: max. 100 mm Weight: 715 kg Djlhjvvknrocdwwjci Storage location: Nattheim