Luenette half

Setzstock SPH 450 mm

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Tsdpev A Sqhefx Adlef Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Tedpfx Aof Epznsdlof Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Condition: good (used), Year of construction: 2009, functionality: fully functional, We offer: Universal Machining Center Manufacturer: Deckel Maho Type: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Technical specifications: X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Center bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Tjdpfx Adsvx Tmcolof Technical features: - Internal cooling Accessories: - Chip conveyor - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: as good as new (ex-display), Year of construction: 2025, OPTIdrill D 26PRO - Column drilling machine Table and column drilling machine with V-belt drive User-friendly safety switch in accordance with IP 54 with undervoltage release and separate emergency stop switch 400 volt models with right/left rotation Drilling depth stop Precisely machined drilling table with diagonal T-slots Height adjustment of the drilling table via rack Drilling table can be tilted ± 45° and rotated 360° V-belt cover with safety switch Tjdodqzbnopfx Adlof Aluminum die-cast spindle lever made from one piece with soft-grip handles Industrial motor Precision spindle bore Machine operation including safety electronics in 24 V direct current Guaranteed concentricity

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm Tedpfx Aeu Ix Izedljf control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Tjdpfx Aeh A Sfdsdlsf Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 495 mm, roller (top) diameter: 515 mm, side roll diameter: 355 mm, roller diameter: 495 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 60 mm, overall weight: 29,200 kg, total length: 5,770 mm, total width: 2,390 mm, total height: 2,760 mm, power: 55 kW (74.78 HP), Equipment: documentation/manual, Interchable top roller 410mm Todpfov Nhkwex Adlsf

Condition: used, Year of construction: 2008, Technical details: x-travel: 6500 mm y-travel: 1400 mm z-travel: 1000 mm table surface area: 7000 x 1100 mm milling head speed: 15 - 4000 U/min Todpfx Adjvmz I Rsljf spindle taper ISO: 50 rapid speed: 20 m/min feed speeds: 1 - 10000 mm/min total power requirement: 75 kW weight of the machine ca.: 30 t with CNC SIEMENS 840 D autom indexing head 0,001 x 0,001 autom toolchanger 100-pockets through spindle coolant 30 bar chip conveyor *

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 max. tightening torque: 140 Nm Todpfjby Np Esx Adljf Tool holder, square: 1/2" electrical connection: 220 V, 280 W weight: 3,3 kg

Condition: ready for operation (used), Sertom brand calender, hydraulic, length 25000 mm with invitation, 2 lower rollers 300 mm, upper roller 318 mm, thickness 14 mm. 22 Kw rotation, 5.5 kw movements, 2.5 kw bunk. Overall dimensions: 600x190x210(h)cm Weight: 15,500 kg Tsdpfxjnr Npye Adlof