Deep hole drilling machine TBM 50-2-1000

SFT Tieflochbohrmaschine TBM 50-2-1000

Condition: good (used), Year of construction: 2004, TBT ML 200-2-800 deep hole drilling machine TECHNICAL DATA Type: ML 200-2-800 Year of construction: 2004 Control: Simatic OP17 Number of spindles: 2 Spindle distance: 12 mm Drilling slide stroke: 800 mm Drilling range: 1 - 10 mm Process: Single-lip drill Drilling depth: Immersion spindle: 110 mm Seal housing: 430 mm Sealing housing with steady rest: 400 mm Prjdpfxovcbg Se Adisd Spindle drive: Power: 1.7 / 2.9 / 1.3 Voltage: 240 / 350 / 350 V Frequency: 100 - 800 Hz Weight: Approx. 2.6 T We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2023, operating hours: 100 h, power: 107 kW (145.48 HP), maximum speed: 40 km/h, front tire size: 540/65R24 BKT, rear tire size: 650/60R28 BKT, Equipment: all wheel drive, compressed air brake, Claas Arion 470 CIS+ approx. 30 operating hours Current equipment: Rear tires: BKT 650/60R 38 Front tires: BKT 540/65 R24 CLAAS front linkage 2.8 t incl. external control External operation at front linkage (CIS) 2 engine speed memories with starting gear and automatic shifting Alternator 200 A/h ISOBUS pre-installation, rear Unlocked Task Control Basic, tractor-side Multifunction lever with ELECTROPILOT Revershift function on multifunction lever Rear linkage, electrohydraulic, 6.25 t Lower links Cat. 3 with hook ends Pedpfxov R Niws Adijrd Top link Cat. 3/2 with hook ends Automatic tow hitch with 38 mm pin diameter Compressed air braking system (dual-circuit) Additional air connection, right cabin side Hydraulic system load-sensing (150 l/min) 3 valves, electrohydraulic proportional, CIS+ Mid-mounted valves assigned to front linkage and 1x double-acting/rear 2 front couplers HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension incl. steering angle sensor Rear axle, standard PTO 540/540 ECO + 1000 rpm PTO stub 6-spline, 1"3/8 With automatic PTO, rear SMART STOP with cruise control management 145 HP max. output, 154 HP homologated rated output, ECE R 120 Master battery switch, automatic, electronic 6-post PANORAMIC cab, 2-point cab suspension Mechanical mirrors, incl. wide-angle, telescopic Additional interface sockets 2 auxiliary headlights on roof, halogen Main headlights + 2 work lights on engine hood LED work lights: 2x front, 4x rear Comfort seat, fabric, low-frequency suspension, heated Passenger seat with safety belt MP3 radio with Bluetooth, USB and hands-free kit Cool box for 1.5 l bottle (under instructor seat) Automatic all-wheel drive, steering angle dependent | Internal No.: 11114182

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) Psdpfxevn Sv Ue Adierd 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: ready for operation (used), No 2 - USED- 4-AXIS HORIZONTAL MACHINING CENTRES WITH MULTIPALLET SYSTEM X-AXIS TRAVEL: 1200 - 1460 mm Y-AXIS TRAVEL: 800 - 1000 mm Z-AXIS TRAVEL: 1200 - 1200 mm RAPID FEEDS X-Y-Z: 36 m/min SPINDLE: 25 - 6000 rpm; 900 - 1130 Nm; ISO 50 - DIN PALLET: N.18+N.12 ; 800X630 + 1000X800 mm; 15 rpm MAX ADMITTED LOAD: 1800 - 4500 Kg MAX MACHINABLE PIECE DIMENSIONS: 1250X1250X1400 - 1700X1350X1400 mm TOOL MAGAZINE: CHAIN-TYPE ; 300 POS MAX TOOL DIAMETER: 125 (250) mm Pedpfx Adon Ny A Djijrd MAX TOOL LENGHT: 650 mm MAX TOOL WEIGHT: 40 Kg CONTROL UNIT: SIEMENS 840 D OVERALL DIMENSIONS: 10000 x 6000 x 3800 mm ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER NOTE: LINEAR MULTI-PALLET SYSTEM LPP WITH No 30 PALLETS AND No 2 LOADING AND UNLOADIND STATIONS; 290 yom 2009, 2.500Kg; 230 yom 2008, 1.200Kg.

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Pjdpfsvca Rcsx Adisrd Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm Pjdpfju Nyxwjx Adijrd X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter installation on request. price free on truck Rotterdam.

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Travel distances: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Table size: 1,100 x 650 mm Max. table load: 2,000 kg Pjdpfx Aswxaf Rodiord Tool holder: HSK 63 Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Coolant tank: 600 l Paper band filter

Condition: used, Year of construction: 2007, 106 369-11 Podswizn Ujpfx Adisrd bore diameter 3 - 65 mm number of spindles 1 total power requirement 45 kW . Siemens control Simens Sinumerik . weight 45 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Introducing the Servomill® KB 1500, a robust Conventional Vertical Milling Machine from KNUTH that excels in the milling machine category. Designed with servo-conventional feed technology, this versatile machine features a heavy-duty frame, wide guideways, and high drive power for superior cutting performance. Its universal milling head swivels in two planes, allowing you to achieve precise positioning at any angle. The integrated electronics facilitate easier and more precise conventional milling, ensuring an efficient workflow without necessitating programming. The Servomill® is perfect for substantial workpieces thanks to its extensive table dimensions of 2100 x 500 mm and high maximum workpiece weight. With enhanced features such as electronic handwheels, limit stops, and an automatic coolant system, users can enjoy increased reliability and performance. Whether you're in plant construction or machine building, this machine will meet your heavy-duty machining demands. Explore the extensive accessories available to maximize your milling capabilities. For further information or to order this reliable machine, please request a quote today. Pjdpfxowt Dvij Adijrd

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Predpsxpwf Tjfx Adiod Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE