Lunette

SMW AUTOBLOK SLU-3.2

Condition: good (used), Year of construction: 2012, Vertical CNC turning machine with a 12-position turret and powered tools; Year of manufacture 2012, in good condition; Fanuc 31i control system with Manual Guide i; 630 chuck – 900 mm turning diameter; Gedsztqp Hspfx An Ioug Automatic door; 2-stage gearbox – resulting in very high torque; Tool setter, detachable; Chip conveyor; Various tool holders, fixed and powered; Only approximately 4,100 operating hours. An inspection is possible and recommended by arrangement, with the machine powered on.

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Gedexv Av Repfx An Isug Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: excellent (used), Year of construction: 2008, Vertical CNC lathe - 3 AXES Brand: HWACHEON Type: VT 1150 M Year: 2008 (2435 cutting hours) CNC: FANUC Oi TC + manual guide Specifications: Turning capacities: Maximum turning diameter: 1350 mm Maximum workpiece diameter: 1150 mm Maximum turning height: 950 mm Horizontal travel: 610 mm Vertical travel: 950 mm C-axis: 360,000 positions 3-jaw hydraulic chuck: Guodpfjzpvrxsx An Ieg Diameter: 1016 mm Rotation speed: 630 rpm Main motor power: 50/37 kW Dimensions (width x depth x height) with conveyor: 2850 x 3943 x 3500 mm Weight: 23.5 T Equipped with: 24-tool turret C-axis 0.001° Live tooling: 2.5 kW, 20 to 3000 rpm Through-tool coolant Rotating tool holders: 1 x Axial, 1 x Radial Turning tool holders Set of chuck jaws Chip conveyor Coolant gun Automatic machining zone support

Condition: excellent (used), Year of construction: 2007, operating hours: 13,500 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 15,800 kg, operating hours of spindle: 13,500 h, coolant supply: 40 bar, We offer in good condition Deckel Maho DMU100P Duoblock from 2007 with only 13.500 spindle hours. Heidenhain iTNC530 control X-Axis travel: 1000 mm Y-Axis travel: 1000 mm Z-Axis travel: 1000 mm Internal coolant 40 bar SK40 12.000 RPM Spindle Table Ø1100 x 900 Gedpfezlyd Dex An Ieug Machine will be in stock in the next 2 weeks.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW Gsdpfx Asuz If Non Isug - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Used, untested robot. No technical documentation available. Not tested. Godpfx Asgu U Itsn Isug

Condition: used, Year of construction: 2012, New mill spindle 2026 Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 12,000 rpm Tool changer: 40 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Godpfezg N Disx An Ioug Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Options: High pressure coolant 60 bar Auto door & Safety Edge Auto tool setter Coolant blast for chuck jaw cleaning Coolant gun Dual chuck pressure LNS Bar feed interface Prep. for special steady rest lower turret Thru-coolant for Main and Sub spindle Tool load monotoring function Profibus 3 color patrol lamp Renishaw RMP60 INCL. high speed SKIp Function

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm Guodpszbc Hhofx An Iog solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control 3-jaw chuck diameter 250mm Gujdpfx Anjvi Haqo Ijg 12-fold revolver tail stock chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm max. Drehzahl / max. spindle speed 4500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 Guedpfszgw I Nex An Isg max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories *