Peeler

SODERHAMN

Condition: new, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 2008-176, The Cambio 500 is a debarker for small logs up to 495 mm (20 inches) in diameter. It operates at feed speeds of up to 120 m/min (393 ft/min). Thanks to its reliability, minimal maintenance requirements, and ultra-low operating costs, the Cambio 500 is the first choice for leading wood processing companies worldwide. Its triangular feed system and carbide-tipped debarking tools, powered by compressed air, are among the key features that ensure superior debarking results. Complete with a feed conveyor. Njdpfx Aaoyl Aqhocoku The machine was not in operation and was in storage.

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: Nsdorvh Tmepfx Aacoku 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, The CAMBIO 66 log debarker is equipped with the latest generation AIR TEN rotor.Knife sytem CAMPRO TRIMAX. The debarker is sold after major repairs. The sales package includes the centering conveyor SODERHAMN. Nkodpfohkh Hxex Aacou

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, Söderhamn Eriksson Band Sawline 3 quad saw grups included reducers, 120 mm – 500 mm small end diameter, to 550 mm large end diameter, with length 2.4 - 5.5(6.2) m. Feeding speed of the sawing line can be adjusted from 25 m/min to 90 m/min. - Top diameter: 120–500 mm - Maximum log diameter: 550 mm - Cant width in Chipper Canter 1: 75(82)–410 mm - Cant width in Chipper Canter 2: 75(82)–410 mm - Saw kerf: 2.7–3.2 mm - Chip length: 20–30 mm Sawline: 1) Log infeed 2) Butt-end reducer 1200mm 3) Debarker Cambio 850 (six tools) 4) 3D log sacnner (rema logbark) 5) Automatic log turner 6) Customill sawgrup 1 included reducer (4 bands) 7) Bord separator (first sawgrup) 8) Reducer 2 Söderhamn/Kocum 240-12 Nkodpeyag T Nofx Aacsu 9) Customill sawgrup 2 (4 bands) 10) Bord separator (second sawgrup) 11) Customill sawgrup 3 (4 bands) 12) Edger line 1 Söderhamn Edgar 5200 (up to 35 pcs/min) 13) Edger line 2 Catech/Arivislanda (up to 40 pcs/min) 14) Gunnarssons combisorting line 40 pins (trimming 3 dm stepps) 15) Renholmen stacker W=1,6mH=1,6-1,8mL=5.6m 16) Automatic stick layer system of stick placers (25x50x1630) Waste handling conveyors electric and control system, hydraulic systems included.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 288, Debarker with infeed conveyor, for max log size either up to 460 mm or 600 mm, speed up 100 m/min, reducer rotor and debarking rotor, debarking rotor with opening 620 mm is NEW PRODUCED with warranty time, incl. reducer rotor change device. On below photos as it stands today, dismantled. Delivery time 3 month from order Nedpfx Astk N Dkoacsku

Condition: used, Year of construction: 2022, functionality: fully functional, feed rate Y-axis: 700 m/min, CAMBIO 75 round timber debarker, CAM TOOL knife system. Supplied with centering conveyor and additional rollers after the debarker. Fully operational, after major overhaul. Nsdotcu Uaopfx Aacjku

Condition: good (used), complete sawmill line Soderhamn//+Ari Njdpsqy A Hcjfx Aaceku

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Nodpfx Ajv Hwk Ujaceku Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: used, functionality: fully functional, For sale on behalf of a customer. Completely overhauled and supplied by us in 2008, in operation until 2024. Factory-new AirTen rotor, used only for a short period. Includes various spare parts and complete documentation. Includes infeed and outfeed conveyor as well as frame. Nksdpfxexnz Rke Aacju

Condition: good (used), Year of construction: 1980, functionality: fully functional, Automatic edger line Söderhamn (Kockums) Edger 511-A Built approximately 1975-1980, or 2000 With complete 6.2 m x 1.5 m infeed conveyor with automatic centering and motorized feed. Board width continuously adjustable. Feed speed 77-118 m/min Minimum edger width 75 mm Maximum edger width 350 mm Maximum wood thickness 125 mm Fixed saw blade Nkjdjuq N Agopfx Aacju 6 feed grooves Saw spindle speed 1800 rpm Maximum saw blade diameter 650 mm Weight with motor and control station 2050 kg

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Nkodpjtuyr Isfx Aaceu Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: used, Chipping roundwood: 100-150 m3/h Nkjdpfehclffox Aacsu Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: used, Year of construction: 2008, Band saw AKE -1400 Speed: 20-80 m/min Saw width: 100-180 mm Nsdpjtp Rh Iefx Aacjku Electric motor: 2x45 kW Diagonal sawing up to 15 degrees Weight 12.5 tonn

Condition: used, Year of construction: 1993, Häwa debarking milling machine Nedex Rv T Iopfx Aacjku H249 / 1000 Year of manufacture: 1993 Log diameter: 0.25 m - 1.2 m Log length: 1.8 m - 7 m Milling head: 30 kW Root reducer: 37 kW Consists of: - Cross infeed conveyor - Debarking - Conveyor belts - Outfeed conveyor

Condition: used, Complete sawing line IDC000103 1. SAW group Soderhamn Eriksson 240-12 ARI Vislanda KS12.2 2. SAW group Soderhamn Eriksson 240-12 Ari Vislanda DS74+1 Nedpfxou E Hu Dj Aacjku 3. ARI Vislanda KT5A-230 Speed up to 60 m/min.