Bed milling machine SORALUCE SP-6000

Soraluce SP 6000

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: HEIDENHAIN, controller model: HEIDENHAIN TNC-640, table width: 870 mm, table length: 3,500 mm, table load: 3,500 kg, overall weight: 24,000 kg, spindle speed (min.): 60 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 900 mm, spindle motor power: 32 W, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 60, tool length: 300 mm, tool diameter: 76 mm, tool weight: 8 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED DOOSAN VCF 850L-II traveling column machining center with HEIDENHAIN TNC-640 CNC Iaodpfx Aow Dcl Roadon

Condition: ready for operation (used), Travel X/Y/Z/U/V: 400mm/250mm/400mm/400mm/250mm, max. workpiece dimensions X/Y/Z: 850mm/500mm/400mm, wire diameter: 0.1mm-0.3mm, max. table load: 1000kg, power requirement: 10kVA. Machine dimensions X/Y/Z: approx. 1800mm/1600mm/2230mm, weight: approx. 2800kg. On-site inspection is possible. Ijdsuqackjpfx Aadoan

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Iaodpfx Aexgn Efeadsn Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Ijdpsw Au H Rjfx Aadean Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Ijdouwlzyepfx Aadoan Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: new, Year of construction: 2025, functionality: fully functional, Dry Ice Cleaning Machine Model X-FORCE – Polish Manufacturer! This listing features a state-of-the-art X-FORCE dry ice cleaning machine, manufactured by the first Polish producer of such equipment. Our devices are sold worldwide and supported by an extensive service network. This is a professional, efficient, and reliable device designed for cleaning surfaces without the use of water or chemicals – the ideal solution for industry, workshops, maintenance, and restoration. Dry ice cleaning technology. Key advantages of the X-FORCE machine: • Polish manufacturing – quality assurance, robust construction, full service support, and spare parts availability. • High performance – effective cleaning with no surface damage. • Mobile and compact – easy to transport and operate. • Environmentally-friendly technology – dry ice cleaning without chemicals and no secondary waste. • Safe operation – 230V power supply, electric vibrator ensures stable ice feed. Technical Specification – X-FORCE: Parameter | Value Dimensions | 100 × 50 × 55 cm Weight | approx. 100 kg Dry ice hopper capacity | 37 kg Operating pressure | 1.7 – 20 bar Dry ice feed range | 0 – 3.5 kg/min Dry ice stream diameter | 1 1/4" Air consumption | 1.5 – 6.0 m³/min (5 bar) Isdsxy Ilfspfx Aadoan Power supply | 230V AC (50/60 Hz) Electric vibrator Applications: • Cleaning of injection molds and dies • Cleaning and maintenance of industrial machines and equipment • Restoration of metal, wood, and stone surfaces • Removal of paints, greases, oils, and industrial contaminants • Cleaning electrical and electronic devices (no risk of flooding) • Post-fire cleanup Why choose X-FORCE: When you purchase a machine from the original Polish manufacturer, you not only receive a high-quality device, but also: • 24-month manufacturer’s warranty • Technical support and operator training • Access to accessories and spare parts • Warranty and post-warranty service on all continents! We are the only dry ice cleaning machine manufacturer offering a 24-month warranty. Brand new machine, ready for operation. Customisation of machine parameters and colour schemes available for larger orders.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 6,000 rpm, table width: 1,100 mm, table length: 4,200 mm, rotational speed (max.): 6,000 rpm, Heidenhain iTNC 530 control Iaedpfxow Ngd Tj Aadon Tool changer for 60 tools Automatic universal head, 0.02 degree in both axes Machine will be refurbished in 2025

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 2,500 mm, Equipment: documentation/manual, Zayer mobile column milling machine, horizontal stroke 10000, vertical stroke 2500, slide stroke 1250, spindle 1800n, tool magazine 30 positions, year 1994, Heidenhain 415b control with 15" LCD display replaced last year, cone grinding October 2024 (iso50), always serviced. Currently in use. Iedpfxjwhd Alo Aadean

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Ijdpfx Aewdm U Nsadoan Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: used, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, X-AXIS STROKE 6000 MM Y-AXIS STROKE 1800 MM AXIS STROKE 1000 MM 7300 X 1090 X H 900 MM BENCH ISO 50 SPINDLE NOSE CONNECTION SPINDLE SPEED 0 - 4500 RPM 2.5 ° X 2.5 ° AUTOMATIC INDEX HEAD CNC SELCA 3045 PD EXTERNAL AND INTERNAL HIGH PRESSURE COOLING Ijdov H D Exopfx Aadjan TOOL CHANGE 60 PLACES NR 01 CNC-MANAGED DIVIDING DEVICE