Feeder

STÓŁ ROLKOWY

Year of construction: 2009, operating hours: 214 h, condition: like new (used), functionality: fully functional, Thin-Cutting Frame Saw DSG Sonic – Wintersteiger Model / Type: DSG Sonic Year of Manufacture: 2009 Condition: EXCELLENT, only 214 operating hours Technical Specifications 🔹 Cutting and Block Parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Stroke frequency: approx. 550 strokes/min - Cutting heights depending on saw length: - Saw length 380 mm: Cutting height 30–88 mm (with Air Jet and magazine), 45–88 mm (with double planer) - Saw length 420 mm: Cutting height 30–128 mm, 45–128 mm - Saw length 500 mm: Cutting height 80–210 mm, 45–210 mm - Saw length 550 mm: Cutting height 80–254 mm, 45–254 mm - Block lengths: - Basic machine: +185 mm - With magazine: 250–1700 mm - With double planer: +250 mm - Block height variation: ±0.5 mm - Cutting width with side fence: 140 mm 🔹 Additional Technical Data: - Cutting width with center fence: 2 × up to 60 mm - Optional channel width: 2–4 × 15–60 mm - Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm - Kerf thickness (material loss): from 0.9 mm Blade lifespan (depending on wood): approx. 40 hours 🔩 Machine Weight: Basic unit: 3000 kg 🔉 Noise Levels (hearing protection required): At 1 m from the machine: - Idle: 97 dB(A) - Cutting: 99 dB(A) At the operator's workstation: - Idle: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and Compressed Air Requirements: Dust extraction: Two connections: Ø 120 mm and Ø 150 mm Isdpfx Asw Dp Ufsh Ujik Capacity: 3200 m³/h (30 m/s) Compressed air: - Minimum pressure: 6 bar - Consumption: 200 l/min Lubrication: Centralized system with guide monitoring ⚡ Electrical Data: - Power supply: L1, L2, L3 + PE - Power cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm Iiodpfx Ahjhp N R Io Uok From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: like new (used), DESCRIPTION Max workpiece width, mm: 1150 Isdpfjhm E Ixjx Ah Ujik Max thickness of the workpiece, mm: 120 Feed rate, m / min: 5-20 Overall dimensions, mm: 5000х3000х2800 Power, kW: 139 Weight, kg: 11000 Machine for bottom grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Working unit 3. Sanding shoe, Machine for top grinding : Working unit 1. Contact roller diameter 250mm, Working unit 2. Contact roller diameter 250mm, Working unit 3. Sanding shoe

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: GSO -830, Cladding manufacturing machine WINTERSTEIGER DSG ECO 150 MM, year 2013 Iiedpfx Asw T U Aroh Ujk

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Iiodovvkipepfx Ah Ujk

Condition: new, Year of construction: 2025, functionality: fully functional, 3-Meter Roller Conveyor with Measuring Stop Heavy-Duty Feed and Support Table for Industrial Cutting Applications The 3-meter roller conveyor with measuring stop is a robust, precision-engineered support system designed for feeding and receiving materials during processing. Equipped with a built-in measuring gauge and ten precision-bearing steel rollers, it ensures smooth material handling, accurate length positioning, and high durability under demanding industrial conditions. It is ideal for use as a roller table with bandsaws, circular saws, and steel profile cutting centers. Applications Cutting pipes, steel profiles, and shafts Steel and industrial fabrication plants Machining centers and metal workshops Production lines with integrated cutting and material transport Standard Equipment 10 bearing-mounted steel rollers, size 60 × 360 mm Heavy-duty steel frame with reinforced legs Iisdpfsw H Rvcsx Ah Uok Adjustable height: 650–1100 mm Integrated measuring stop with clear, easy-to-read scale Technical Specifications Parameter Value Roller diameter 60 mm Roller length 360 mm Number of rollers 10 Conveyor length 3000 mm Conveyor width 450 mm Adjustable height 650–1100 mm Max. load capacity 900 kg Weight 50 kg

Condition: excellent (used), Catalogue number 6765 TECHNICAL DATA - max. working width of element: 230 mm - max. working height of element: 160 mm Number of spindles: 4: 1) lower horizontal, 230 mm, 5.5 kW 2) right vertical, 160 mm, 5.5 kW 3) left vertical, 160 mm – electrically adjustable left/right from the control panel, 5.5 kW 4) upper horizontal, 230 mm – electrically adjustable up/down from the control panel, 7.5 kW - all spindles adjustable up/down, left/right - spindle diameter: 40 mm from the top: - driven infeed rollers, geared, 6 pcs (incl. 2 double rollers) - driven outfeed rollers, rubber-coated, 2 pcs from below: - infeed roller, driven, geared, metallic, swiveling in the lower table - outfeed roller, driven, metallic, smooth - pneumatically adjustable rollers - length of infeed table (with pneumatic feeder): 3390 mm - possible operation without activating the pneumatic feeder; the table is height-adjustable - central lubrication - electric thickness adjustment - variable feed speed adjustment - feed via cardan shafts - feed motor: 4 kW - enclosed in cabin - extraction port diameter: 4 x 120 mm - dimensions (L x W x H): 7000 x 1950 x 1700 mm Iiodoin Elpopfx Ah Uok - weight: approx. 3000 kg - suitable for wet and dry wood - pneumatic feeder on the infeed table - second-hand planer, in very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)