Gear hobbing machine

STANKO 53A80H

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Operating hours counter, control ON: 35,978 h Ppodpfxoyx Hgzo Am Tow

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Pedpfx Aexf E Twem Tjpw

Condition: used, TECHNICAL DETAILS - maxi module to be cut : 1.5 [mm] - maxi diameter to be cut: 70 [mm] - maxi length to be cut: 100 [mm] - part maxi length: 200 [mm] Podpfx Aeuhbplom Tspw - number of tooth mini to be cut: 3 - number of endless screw threads (special accessories): 1 - helix angle: 0-90[°] - milling tool maxi diameter: 50 [mm] - 11 milling tool normal speeds - speed normal machine: 226 – 2100 [rpm] - power: 1.5 [kW] - net weight: 1035 [kg]. EQUIPMENT - with part loader

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 Ppjdpjt Rkcuefx Am Tjw travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Table long.travel (AxisV): mm. 1500 Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Ppsdperfx Utefx Am Tew Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Year of construction: 2016, condition: reconditioned (used), For sale is 1 hood-type dishwasher from Meiko, model DV 80.2, manufactured in 2015/16. Ppedpfxjp Ebn De Am Tjw Condition: Good, has been used partially with soft water. No dosing unit included! These machines are former lease units. Various configurations are available, potentially with internal salt softener, with GIO module, or completely without softener. Please let us know how you would like your package to be assembled. The quoted price is a base price depending on the equipment—request your individual offer! Comes with a 6-month spare parts warranty. Preventive maintenance with replacement of several wear parts has been performed regularly. Inspection and test run on site is possible and encouraged. Technical Data: Output: up to 60/40/17 racks (equals approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program cycle times: 60/90/210 seconds Rack size (mm): 500 x 500 Entry height: 440 mm Tank capacity: 22 L Water consumption per rack: 2.6 L Tank heating: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: Stainless steel Connected load: 400 V / 11.2 kW (cold water), 9.7 kW (hot water) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical Installation: Electrical connection: 3-phase current, 3 NPE, 400 V, 50 Hz. The electrical setup complies with VDE regulations. Water Installation: The dishwashers can be connected directly to the mains water supply without additional safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. Installation regulation EN 1717 must be observed. Drain: ¾". On-site wall drain max. 700 mm height. Length of connection hoses approx. 1.8 m from machine. Collection of the machines is preferred. Shipping via freight company is possible at buyer’s expense.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) Ppodeylt Ukopfx Am Tjw AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: new, Press brake tool/upper punch for Trumpf press brake H256mm, L500mm, L550mm in segment Pedoiimz Repfx Am Topw

Condition: used, Year of construction: 1987, Technical details: Ppsdpfoiay Sfsx Am Tjw number of spindles: 8 spindle passage: 51 mm Article: multi spindle automatic lathe Manufacturer: Schütte Type: AF51 Yob: 1987 eight main spindles max. bar diameter D=51mm control SIEMENS SIMATIC S5 pick up in pos. 7, for rear machining thread cutting drive independent feed in positions 2/3 electronical trip dog control “Balluff” clear text display Wöhrle coolant pump magnetic cartridge filter oil running incl. bar loader IEMCA PRA 40/37/F, yob 1987, (bundle type) Painting in light blue and light grey The configuration of tooling will be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), These listed powered tools, VDI 50, are designed for a tool changer manufactured by SAUTER and are in good condition and fully functional. They were used on a CNC turning machine, GILDEMEISTER CTX 600. 6 x powered tools, straight design, manufactured by NACKE + WTO, VDI 50 for tool turret manufactured by SAUTER: Item No.: XVI 24275 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 545.00 plus applicable VAT. Item No.: XVI 24277 1 Drilling and milling tool, straight design, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 400.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Ppodpfx Ajbql S Hem Tsw Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Item No.: XVI 2687 1 Drilling and milling tool, straight design, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: € 650.00 plus applicable VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany