Drilling and tapping machine

Steinel GT 6.52

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: Nsdpovmz N Ujfx Ah Ujlk LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: used, Year of construction: 1999, machine/vehicle number: 99T318, SECOND-HAND DOUBLE SIDED CUTTING SAW PERTICI TYPE UNIVER 330IP - CE RULES - Working length 3300 mm - 4.5 kw - Blade diam. 330 mm - V. 380/50 - S/N 99T318 Nledpfxeqmpnao Ah Usk - Year 1999

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher Nlodpfxotzyx Ts Ah Usk

Condition: good (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 1,230 kg, AUTOMATIC SAW / DOUBLE HEAD STB / FIMTEC SD 500 S6 YEAR 2005 Nedpfer E Alqjx Ah Uelk

Condition: excellent (used), Perfectly preserved six-spindle INDEX MS 25 automatic lathe with six transverse and six longitudinal tool guides. The price is negotiable depending on the selected additional equipment: clamping pods, tools, chip conveyor, etc. The machine is still in production. Viewing possible by arrangement. Nodjqhkukjpfx Ah Ujlk

Condition: used, Year of construction: 1991, Mazak SQT 10MS lathe for sale. The machine is fully functional and in good condition. Technical specifications: Max. turning diameter 230 mm Main spindle Speed range 35-6,000 rpm Main drive power 11 kW Secondary spindle Drive power 5.5 kW Nodpov Tbu Dsfx Ah Uelk Speed range 180 - 6,000 rpm Indexing 72 positions/5 ° Tool turret Number of tool positions 12 Driven tools Speed range 120-3,000 rpm Drive power 2.2 kW Travel paths X-axis 160 mm Z-axis 455 mm B-axis 460 mm Travel speed Feed range X/Z-axis 0 - 5,000 mm/min C-axis 1 - 2,000 °/min Machine data (with standard equipment) Total connected load 43 kVA Machine weight, . 3,500 kg Machine dimensions (L x W x H), approx. 2.70 x 1.70 x 1.85 m Accessories Tool presetter (MAZAK Tool Eye System) C-axis Dual foot switch for opening/closing the chuck Chuck status feedback (open/closed) Front door lock Complete coolant system Work area lighting Documentation

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, functionality: fully functional, power: 33 kW (44.87 HP), overall weight: 1,570 kg, fuel type: diesel, color: original, axle configuration: 1 axle, fuel: diesel, Schliesing 325EX‑D chipper: The compact one with a rotating chipping unit The Schliesing 325EX‑D chipper is a powerful wood chipper that is ideal for demanding wood chipping applications with its powerful motor, flexible feed options and robust design. With a pivoting feed hopper and a variety of safety features, it meets the highest standards and offers an efficient solution for processing logs up to a diameter of Ø 20 cm. Technical data: Type: Schliesing 325 EX Logs: Up to Ø 20 cm Feed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Kubota common rail turbo diesel engine with DPF, output 33 kW / 44.9 HP. Industrial freewheel clutch between engine and chipping disc to protect the engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with EU homologation. Robust, fixed sheet steel fenders. Device for support wheel at the front and parking support at the rear. Lighting in accordance with StVZO with impact-protected components. Pneumatic tires 205/65 R15C with EU homologation. Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth. Fully galvanized hopper flap for durability. Hopper dimensions (inside): width = 1,040 mm, height = 960 mm. Pivoting blow-out pipe with adjustable spreading flap. Blow-out pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Nodsv Ev E Uspfx Ah Uolk Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping mechanism: Rotatable chipper housing with adjustable input angle of 270°. Safety circuit in accordance with EN 13525. Chipping disk with a diameter of Ø 655 mm and a thickness of 35 mm. Closed blade system for quick and safe blade changes. Continuously adjustable chipping knives, can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size. Fill level indicator for the hydraulic oil tank.

Condition: excellent (used), Year of construction: 1999, max. working width: 2520 mm for sheets up to: 1.5 mm Opening width upper beam: 180 mm Adjustability of folding beam: 40 mm Nljdpfsqi Awwox Ah Ujk Bending angle adjustment: 135 ° Weight: 1970 kg Space requirement: 3630 x 750 x 1250 mm

Condition: used, Year of construction: 2021, saw blade diameter: 800 mm, rotational speed (min.): 1,450 rpm, power: 5.5 kW (7.48 HP), Crosscut saw AS Very good, well-maintained condition Saw blade diameter 800mm. Sturdy tubular steel base frame. Powerful saw motors. Pneumatic material clamps (3 vertical). 2-hand safety operation. Coolant device. Protective hood. Optionally with length measuring system or automatic positioning system. Nlodpfx Aod Szf Noh Ujk Version as automatic saw-drilling machine or automatic saw-punching machine on request.

Condition: excellent (used), Year of construction: 2008, The condition of the machine is very good, it has performed only 123,000 operations. CNC controlled machine, designed for processing welded frames. Multiple use of the same time Nljdem Ak R Uopfx Ah Usk He works in a welding and cleaning line It does not take up additional space in the hall It can work in the line of frames, sashes or mixed All operations are performed during cooling: dehydration vents, grooves venting, holes in colored profiles drilling the frame for the post connector drilling holes for the hinge in door frames (x6) drilling holes for the hinge in the leaf (x2) The center has its own transport of frames from the welder to the cleaner PLC control, NC User-friendly visualization