Surface planer

SAC FS 430

Condition: ready for operation (used), Year of construction: 1984, SAC Surface Planer FS 430 Cedpfx Ajx S Ivksbuspu Table length mm 2900 Infeed table mm 1550 Outfeed table mm 1310 Table width mm 430 Table height mm 800 Cutterhead diameter mm 120 Cutterhead speed rpm 5000 Number of straight knives 4 Straight knives mm 430 × 35 × 3 Rabbeting depth mm 20 Planer fence mm 1005 × 180 Fence tilt 0-45 Motor power HP 4 Required space mm 2900 × 700 × 960 Weight kg 475 Condition: function tested

Condition: good (used), Year of construction: 2007, functionality: fully functional, Weiler C30 x 750 precision lathe (2007) Manufacturer: Weiler Type: C30 x 750 Year of manufacture: 2007 Availability: several machines available Condition: very good, used, from training workshop, last maintenance 09/2024 Center width 750mm Circulation diameter over bed 330mm Rotation diameter facing slide 160mm Movement of facing slide 180mm Bed width 240mm Turning tool cross-section 20 x 20mm Spindle head according to DIN 55027 size 5 Spindle diameter in front bearing 70mm Spindle bore 40.5mm Inner taper of the main spindle 5mm Drive power 60 %/100 % ED 9/7KW Total speed range 1 - 4,500 rpm Feed force longitudinal 6,000N Planar feed force 3,000N Feed range 0.001 - 10 mm/rev Rapid traverse speed longitudinal/plane 6/3 m/min Metric threads 0.1 - 400mm Inch thread 56 - 1/4 G/inch Module thread 0.125 - 28mm DP thread 224 - 1 Dp Cedpfx Ajxd Tiwebuspu Max. Threads 99 Quill diameter 50mm Quill stroke 130mm Inner taper of quill MK3 Length 1750mm Width 1350mm height 1670mm Weight 1300kg Scope of delivery Rota S Plus 200-52 jaw chuck Multifix Machine light Coolant system Machine feet Original documentation Weiler maintenance log 09/2024

Condition: good (used), 1 x Drilling - tapping machine Wörner BG 16 with pneumatic feed (drilling by hand also possible) Cjdpfx Absipyiwouspu Coolant device Technical data: spindle speeds : 95 - 3.500 rpm (24 steps via pulley 2 via motor) mounting: MK 2 Drilling capacity in steel: 16 mm Threading in steel: M 8 The machine can be inspected under power.

Condition: excellent (used), Several 150 m³ steel storage tanks (extinguishing water tanks) located underground Volume: 150,000 litres diameter: approx. 3.000 mm length: approx. 22.500 mm Weight: approx. 28,000 kg The tanks are converted to underground extinguishing water tanks according to DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling/fixed coupling A according to DIN 14319 in the design form B without gauge connection. Furthermore, the tank has a venting flange connection in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm ground cover and 500 mm above ground. - The tank is emptied, cleaned and has been provided with a bitumen exterior coating by us at the factory. - if required, we can provide the tank with a full bitumen-based interior coating (against corrosion) or epoxy resin interior coating A cost-effective delivery with our own truck is possible. Simply inform us of the delivery location, you will then immediately receive the exact freight costs. Cpsdpfx Abofnh Tgjueu An inspection is possible at any time by prior appointment. If you need any further information, just give us a call or send us an e-mail to b.barth (a) barth-tank. de

Condition: excellent (used), SCM S520 Thickness Planer Working width: 520 mm Working height: 250 mm Adjustable feed speed: 4 steps Cutterhead with traditional knives 4-knife cutterhead Power: 4 kW Weight: 670 kg Codpfx Ajx Hfg Nobuspu

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3595, Ladies and Gentlemen, Csdpfxjthd She Abuepu We are selling a Weiler Commodor B lathe built in 2001 with Heidenhain 3-axis digital readout. The machine has been extensively overhauled in our workshop. Among other things, the main spindle bearing and the lead/traction spindle bearing were completely renewed! Technically, geometrically and visually, the machine is in excellent condition, which you are welcome to see for yourself on site. Availability: on request Machine no. 3595 Year of construction: 2001 Center height: 180mm Center width: 1000mm spindle passage: Ø 56mm max. spindle speed: 2000 rpm Tailstock taper mount: MK4 Feed range: 0.026 - 0.888 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.35 - 12 mm Spindle brake: switchable Connected load: 4kW Dimensions: approx. 2.2x1.5x1m (LxHxW) Weight: approx. 1.8t Further equipment and accessories: 3-axis digital display, coolant device, chuck guard, pull-out chip tray, 3-jaw chuck Röhm, 4-jaw chuck Röhm, various clamping jaws... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice E00f3g2rl - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), Planer (four-sided planer) Constant table Max. planing width: 605 mm Planing height 2-sided: 200 mm Planing height 4-sided: 200 mm Feed rate: 7 - 9 - 11.5 - 14.0 - 18.0 - 23.0 m/min OPTION: Feed speed up to approx. 50 m/min Motors Bottom cutterhead: 7.5 kW Top cutterhead: 11.0 kW Right vertical spindle: 11.0 kW / D 40 mm Left vertical spindle: 11.0 kW / D 40 mm 5th horizontal spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thicknessing: 1.1 kW Cutterheads with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient 3 knives operating, and 3 sharp knives are in reserve position Additional unit: 5th working shaft horizontal 15 kW Outfeed unit roller width: 350 mm Machine is sold in condition A, B or C: A) as is B) repaired C) repaired and with new electrics OPTION Pre-planer at the machine infeed with planing head width of 200 mm and 3.5 kW motor Cjdpfx Abewg S Tvsuepu

Condition: excellent (used), Technical data: Max planing width: 400 mm Max planing height: 240 mm Cpedpfx Abov Rv Dbeuou Knife shaft diameter: 120 mm Number of knives: 4 Feed speed: 6-12 m/min Manual lifting Extraction port: 110 mm Power supply: 400 V Motor power: 10 kW Overall dimensions: Length: 2200 mm Width: 860 mm Height: 1250 mm

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Cpjdpfx Ajvkdqiebuju Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW

Condition: new, turning diameter 560 mm turning length 1910 mm swing diameter over bed slide 355 mm Swingdiameter in the bed bridge 790 mm centre height 280 mm Turning length in the bed bridge 170 mm reus 12 (25-1600) U/min tail stock MK 5 quill stroke 180 mm diameter of quill 75 mm spindle taper DIN ISO 702-2 Nr. 8 Csdoucgr Ispfx Abuopu spindle bore 80 mm spindle cone MK 7 feed längs 35 / 0,059 - 1,646 m/min feed plan 35 / 0,020 - 0,573 m/min total power requirement 8,5 kW weight of the machine ca. 2560 kg dimensions of the machine ca. 3450 x 1150 x 1650 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set