STETON INDEX

STETON INDEX

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Dedpfx Aoxnlgceg Rekk

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom Dkedswgwmnspfx Ag Rjk 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled...

Condition: used, machine/vehicle number: 008116, Max. machinable height: 120 mm Dsdpfx Asw Iddzjg Rskk Max. forward feed speed: 25 m/min Operator shafts number: 6

Condition: used, Year of construction: 2009, total width: 1,800 mm, total height: 1,650 mm, Empty weight: 2.400 kg Dimensions (LxBxH): 350 x 180 x 165 cm Motor lay-out: Under, 5,5 kW Right, 5,5 kW left, 5,5 kW Upper, 7,5 kW Under, no motor, but optional spindel - Year: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: AA2/001125 - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 40 - └ Spindle 2: - - Spindle diameter [mm]: 40 - └ Spindle 3: Dkodpjwnh Irsfx Ag Rek - - Spindle diameter [mm]: 40 - └ Spindle 4: - - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Diameter extraction nozzle [mm]: 120 - Voltage [V]: 400 - Current consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (l x w x h) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support Dedpjvpr N Rsfx Ag Rokk 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 114550, working width: 230 mm, planing height: 120 mm, number of spindles: 6, Weinig Powermat 500 Four-Sided Planer and Moulder for planing and profiling solid wood on four sides. The machine features CNC control and the proven PowerLock quick-change system. Additionally, it is equipped with an automated return mechanism for the planed workpieces, ensuring optimum suitability for efficient production processes. Machine Configuration - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock Working width: 20 – 230 mm Working height: 8 – 120 mm Worktable length: 2.5 m (including straightening ruler) Top pressure rollers, spring-loaded Side pressure, pneumatically actuated Frequency-controlled feed with brake, feed speed: 5 – 30 m/min Dkjdpfxsx Sxfve Ag Rek Reduced feed roller spacing between feed elements (400 mm) Additional feed rollers and shortened roller spacing Durofer steel feed roller, self-cleaning Infeed roller before the first bottom tool, pneumatically actuated Siemens/Powercom control system The machine is in very good and well-maintained condition, has been professionally operated and serviced regularly, and will remain in operation until 17.12.2026. Viewing of the machine in operation is possible by appointment at any time. The technical description as well as the layout drawing of the machine can be found in the documents.

Condition: used, Year of construction: 2021, Number of spindles 5 St. Working width 230 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. Control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carriage motorized adjustment TECHNICAL DATA in Detail ----- Working width (for tool diameter 125-163 mm): 15-230 mm Working height (for tool diameter 125 mm): 10-160 mm (Tool diameter up to 163 mm): 10-160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT Djdpfxowgwmhj Ag Rekk ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment range axial 20 mm Connecting piece D = 125 mm Aspiration individ...

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles speed 6000 rpm variable feeding speed adjustment to 30m/min pneumatic pressure of feeding rolls Dedpfx Agopccy Aj Rskk POWERCOM Controll infeed table length 2470mm

Condition: good (used), Year of construction: 2015, Used, in good condition Year of construction: August 2015 (installed end of 2016) Technical description Working width (with tool cutting circle 125 mm): 20 - 230 mm Working height (with mould cutting circle 125 mm): 8 - 120 mm Six standard feed pendulums from above Two driven rollers in the machine table 1st spindle First lower horizontal spindle Motor with brake 5.5 kW (7.5 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 125 - 145 mm Folding device, incl. folding cutter 2nd spindle First right vertical spindle 5.5 KW (7.5 HP) Individual motor with brake Diameter: 40 mm Speed: 6000 rpm Tool cutting circle 40 mm below table level: 100 - 200 mm Tool cutting circle 55 mm below table level: 100 - 180 mm Max. Tool diameter behind stop plane 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 3rd spindle First left vertical spindle Individual motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 40 mm below table level 100 - 200 mm Tool cutting circle 55 mm below table level 100 - 180 mm Maximum moulding depth 35 mm Axial adjustment movement 55 mm 4th spindle First upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. Dodpequ Sc Hofx Ag Rokk 5th spindle Second upper horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Max. tool cutting circle for straight cutterheads: 180 mm Maximum moulding depth 35 mm Axial adjustment movement 40 mm Divided pressure shoe in front of upper spindle, adjustable to tool cutting circle and swivelling away from the tool, spring-loaded. 6th spindle Second lower horizontal spindle Motor with brake 7.5 KW (10 HP) Diameter 40 mm Speed 6000 rpm Tool cutting circle 112 - 200 mm Maximum moulding depth 15 mm Axial adjustment movement 35 mm Spindles in general All moulder spindles dynamically balanced for high concentricity. Feed system Frequency-controlled feed 5 - 30 m/min. infinitely variable with brake 4 KW (5.5 HP) Machine stand, tables and stops Manual lubricant pump for table resin removal Machine operation Memory function For memorising the setting values of profiles. Spindle axes with electronic double displays. Function: - Saves the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are synchronised by manually adjusting the spindle - 99 memory locations Electric height adjustment of the feed Centralised position of lubrication points at the front of the machine

Condition: used, Year of construction: 2010, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm feed 5-25 m/min Dimensions (L/W/H) 4700/1800/1100 mm weight ca. 4.000 kg CASOLIN MEGA 230/6 four-side planer ----- 6 spindles, with touchscreen control. Dksdpfxjwmggke Ag Rjk Width and height controlled. Spindle arrangement: 1st spindle: bottom, 40 mm diameter, 6,000 rpm, 5.5 kW 2nd spindle: right, 40 mm diameter, 6,000 rpm, 11 kW together with 3rd spindle: left, 40 mm diameter, 6,000 rpm 4th spindle: top, 40 mm diameter, 6,000 rpm, 7.5 kW 5th spindle: bottom, 40 mm diameter, 8,000 rpm, 5.5 kW 6th spindle: top, 40 mm diameter, 8,000 rpm, 5.5 kW Machine without machining tools. The additional screen on the front of the machine is not included in the scope of delivery (is part of the window system). Machine already dismantled and stored. (technical information according to the manufacturer - no guarantee!)