Angular log saw

Strojcad UH500

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Hedpfx Aoxy Tmnef Tjff

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 Hfsdpjwhw Iusfx Af Tjf - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ - electrical switchboard for the machine.

Year of construction: 2014, condition: reconditioned (used), Parameter Unit Value Technical data Hfodpfx Afettic Sj Tjf Number of cutting systems kpl. 1 Horizontal clearance mm up to 600 - according to order Vertical clearance mm max. 360 Main motor kW 7,5 Feed motor kW 0,55 Lifting motor of cutting system kW 0,55 Feed adjustment m/min continuously adjustable Conveyor belt pcs. 1 Length of band saw mm 4010 Width of band saw blade mm 32 - 50 - according to order Thickness of band saw blade mm 0,9 -1,25 Module mm 22,2 Length of working table mm 3000 - standard Width of the working table mm 230 Height of the machine m 2,50 Machine width m 2,25 Machine length m 3.0 Weight kg 700 net price vat invoice machine after major renovation

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Hfsdeyi Uqzopfx Af Tof Weima WLK6S Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work.

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Equipment and technical data: Hedpfsx H U Ngsx Af Tjff - Motor 18.5 kW - Rotor diameter 248 mm - Hopper opening approx. 620 x 800 mm - Standard screen - 30 cutting knives - Extraction nozzle 160 mm Dimensions: approx. 1730x1160x1650 mm Weight: approx. 1100 kg Availability: short-term Storage location: Röllbach