Four Side Planer

Strugarka czterostronna CASADEI P230

Condition: used, Year of construction: 1994, SECOND-HAND 5 SPINDLES MOULDER WEINIG MOD. PROFIMAT 23 - Working width 230 mm - Working height 120 mm. Composition : - horizontal bottom - vertical right - vertical left - horizontal top - horizontal bottom Year 1994 Nljdpfxerm Rxwe Abueh V 380/50

Condition: used, Technical data: Max planing width: 230 mm Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Nlodpfjmiik Tsx Abueh Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: used, SCM 320cm SiX panel saw 320cm carriage, aggregate tilting in two directions +45 to -45 degrees, blade tilt and up/down adjustment with electric motor, rip fence on the right side with electric adjustment up to 1500mm, Nedjzd Uf Tspfx Abuslh 2-axis scoring saw with electric adjustment, 7.5KW motor, speeds controlled by a frequency inverter, max. blade diameter 550mm, carriage with angle adjustment used machine, good condition The machine has a new, non-original control system. All adjustments are functional.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Nsdpfxex Ebzdj Abuolh Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Year of construction: 1998, condition: good (used), machine/vehicle number: 0159488169537, Offer 23293 Technical data: - Pressure capacity 300 KN Nlsdpfxopuy H Do Abujh - punches e.g. up to 30 mm Ø in steel 9 mm - or with special punching device up to 100 mm Ø in steel 2.5 mm - stroke infinitely variable 0 to 28 mm - stroke rate 26 to 36 1/min - throat 610 mm - Installation height 240 mm - Drive 400 V / 4 kW - Space requirement approx. W 750 x H 1650 x D 1350 mm - weight approx. 1300 kg - with: - foot switch - grain search device, - support table with foldable stops W 1100 x D 850mm - shifting distance of the stops from the center of the punch - width between Li and Re approx. 470 mm x D 510 mm

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,800 mm, overall weight: 1,300 kg, Equipment: CE marking, saw blade guard, Format 4 Format Panel Saw Kappa 550 Power Drive - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment 202 mm - Positioning control for swivel adjustment 90°–45° - Rip fence 3200 mm, 2 fence jaws - Extension table 1250 x 650 mm - Sliding table „X-Roll“, sliding table length 3700 mm, fence shoe - Cutting width 1250 mm - Upper guard, adjustable for suction and height, can be swiveled away from the work area (not shown in the pictures, but present) - Saw blade diameter 250–550 mm, maximum cutting height 202 mm - Position-controlled height adjustment & angle adjustment 0°–46° - Panel saw with table extension up to 1200 mm behind the saw blade, steel powder-coated - Weight: 1300 kg Nodpfx Aboy Hk Swouslh Price ex works Transportation possible for an extra charge!

Condition: as good as new (ex-display), Year of construction: 2026, Swivel spindle: Yes 0 to 45° Height adjustment: handwheel / electric Swivel adjustment: Handwheel / electric Milling jaw adjustment: manual Height display: Digital display Njdpjuzkxxjfx Abuslh Swivel angle display: Digital display Milling stop indicator: mech counter Milling spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 10-12-10-064, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 1,000 mm, saw blade diameter: 500 mm, Equipment: saw blade guard, scorer, ALTENDORF F45 – Panel saw, manufactured in 2010 Equipment according to the Altendorf factory archive, confirmed on July 31, 2026: - Manufacturer / Model: ALTENDORF F45 - Year of manufacture / Machine number: 2010 / 10-12-10-064 Nlsdpoztwvaofx Abuoh - Double sliding table: Table length 3,000 mm - Cutting width: 1,000 mm - Main motor: 5.5 kW (7.5 hp) - Saw blade diameter: max. 500 mm - Control: C-terminal on the machine stand - Scoring unit: 2-axis, with RAPIDO scoring system - Clamping system: Standard (toothed nut) - Table extension: 840 mm - Stops: Angle/miter stop; DUPLEX up to 1,350 mm - Electrical connection: 400 V / 50 Hz Complete video with original audio available in the advertisement. Price upon request. Offer includes free loading onto a truck. Inspection, loading, and transport by arrangement. Scope of delivery according to individual offer. Taken over from a carpentry workshop in Reutlingen. Machine location: TEC-WOOD warehouse in Poland, approximately one hour from Frankfurt (Oder). Consultation and sales handled by DS-Maschinen in Stuttgart.

Condition: new, functionality: fully functional, input voltage: 400 V, Application of a spiral shaft with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional knife shaft. A key advantage of carbide inserts is the ability to replace or rotate individual knives in the event of damage, significantly reducing operating costs. Carbide-tipped blades enable chip-free planing and optimal smoothness on any type of wood. Perfectly even thickness planing ensured by the centrally guided column table with central support. Processing accuracy of 0.1 mm, adjustable via a digital indicator on the handwheel. High working comfort due to the noise-reducing guard. Precision-ground thicknessing table for workpieces up to 230 mm in height. Standard equipment includes table extension with integrated rollers. Chain drive ensures precise feed of the workpiece. Numerous safety features: no-voltage release switch, limit switches to prevent unintentional activation, emergency stop switch. Technical specification Thickness planing width: 410 mm Material height clearance (min.): 5 mm Material height clearance (max.): 230 mm Table size (width): 930 mm Table size (depth): 410 mm Maximum chip removal in thicknesser: 5 mm Minimum planing length: 150 mm Cutterblock diameter: 95 mm Number of knives/inserts on cutterblock: 72 pcs Cutterblock speed: 4050 rpm Feed speed: 6 m/min Extraction port diameter: 100 mm Motor power: 4.2 kW Motor power S1 100%: 3.0 kW Voltage: 400 V Dimensions (width): 1110 mm Dimensions (depth): 710 mm Dimensions (height): 1020 mm Weight approx.: 239 kg Scope of delivery Nlsdoytc Suopfx Abush Spiral cutter head with 72 TCT knives Spare TCT knives (5 pcs) Digital thickness table height indicator Table extension with rollers

Condition: excellent (used), SCM T130E Spindle Moulder with Glazing Bead Unit Spindle diameter: 35 mm Total spindle length: 140 mm Variable spindle speed via frequency inverter: up to 10,000 rpm Main motor power: 5.5 kW Unit for cutting glazing bead Unit power: 2.2 kW Electronic spindle height adjustment Electronic fence adjustment 4-roller feed Masterwood Feed speed adjustment via variator CE certified DTR technical documentation Nljdpfx Ajxbnyrjbush Year of manufacture: 2005