Cylindrical Grinding Machine

STUDER S 25

Condition: used, TECHNICAL DETAILS - distance between centers : 200 [mm] - centers height : 100 [mm] - strokes (X/Z) : 130 / 170 [mm] WHEELHEAD - grinding wheels dimensions : 400 x 63 x 127 [mm] - peripheral speed : 45 [m/sec] - power : 3 [kW] - positioned at : 30 [°] WORKPIECEHEAD - type of cone: MT4 - speeds : 600 - 3000 [rpm] - power : 0,5 [kW] - C axis indexing precision : +/- 0,5 [°] Dkedpfxsuhbxmo Aggjt TAILSTOCK - type of cone : CM2 - quill stroke : 30 [mm] ELECTRICAL SUPPLY - voltage : 400 [V] - frequency : 50 [Hz] - installed power : 19 [kVA] DIMENSIONS - floor space : 1760 x 2180 [mm] - height : 2630 [mm] - weight : 4.000 [kg] HOURS - under power : 46.943 [h] - working hours : 21.529 [h] EQUIPMENT - CNC FANUC 16TB - soft options : Studer Release B, Pictogramming - interface : RS232C - electronic deported handwheel - direct measuring rules on axes X/Z - tailstock with fine concentricity adjustment - tailstock pinole hydraulic recoil - swiveling dressing wheel upon table : FISCHER AES-72x230/3 - dynamic wheel balancing device : DITTEL HBA 4000 - prepared for diameter sensor : MOVOMATIC ES400 - prepared for parts loading/unloading robot : FELSOMAT - automatic front door - prepared for cooling - electrostatic aspiration : ELOSTA BF2000 - pneumatic collets chuck - 1 wheel-holder - 1 grinding wheel - support arm for zero gravity wheel change - 1 balancing shaft

Condition: used, TECHNICAL DETAILS - center height : 100 [mm] - Distance between centers : 650 [mm] - Max. table orientation : [°] - Travel : 650 [mm] - Speed : 100 - 3500 [mm/min] GRINDING WHEEL HOLDER HEADSTOCK - Orientation : [°] - T1 grinding wheel dimensions : 350 x 32 x 127 [mm] - Power : 3 [kW] - Speed : 1600 - 2200 [rpm] - Peripheral speed : [m/s] PART-HOLDER HEADSTOCK - Spindle speeds : - 1200 [rpm] - Power : 0.5 [kW] - Type of cone : CM4 - Max. part weight : 20 [kg] - Orientation : 0 - 90 [°] POWER SUPPLY Dkjdeyn R I Hspfx Aggot - Supply voltage : 400 [V] - Power : 8 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 00 x 00 [mm] - Machine height : 1650 [mm] - Machine weight : 1900 [kg] MACHINE HOURS - Number of hours under power : 01 [h] EQUIPMENT - Sony LG20-2 display - Automatic contact detection : SENSITRON 6 - 1 tailstock with fine adjustment - 1 internal grinding spindle - Fixed dressing device - Coolant tank - 1 three-key steady rest

Condition: good (used), Year of construction: 2011, Maximum grinding diameter 290mm, maximum grinding length 800mm, grinding wheel size 290mm x 63mm bore. Control Fanuc 21i-TB, workhead speed 1,000rpm, spindle power 5Kw, Dkjdpfx Aetudfdoggot table swivel +6/-3.5 degrees, workhead swivel angle 0-90 degrees. internal spindle motor 1.5kw. fitted with coolant.

Condition: refurbished (used), functionality: fully functional, year of last overhaul: 2026, ⚙️ Studer S20 Favorit – Universal cylindrical grinding machine 400 x 100 mm ⚙️ 🔝 Latest version with PLC and updated automation 🔹 High-precision cylindrical grinding machine for external and internal grinding. Djdpfxjzcytbs Aggekt 📐 Main features: ↔️ Distance between centers: 400 mm 📏 Center height: 100 mm 🇪🇺 CE marking 🔧 Completely rebuilt (full retrofit) to offer performance and precision comparable to that of a new machine. 🛠️ Equipped with renewed components and carefully adjusted to ensure maximum reliability and precision. 🧰 Wide range of accessories available. 📅 Delivery time: available for immediate delivery! 📸 Photographs of our finished machine. 🏷️ Project reference: OP26-003 For more technical information, pricing, or details about the machine, please do not hesitate to contact us.

Condition: used, Year of construction: 1982, grinding diameter 630 mm grinding length 600 mm centre height 320 mm Maschine wird überholt nach Kellenberger Messprotokoll und neu lackiert. Die anfällige Güttinger Steuerung wird durch die zeitgemäße BEMA X Steuerung ersetzt. Das heißt die Maschine erhält in diesem zuge auch eine komplett neue Elektrik. Siehe Beispielfotos. Djdpfjvq R Uzex Aggokt Maschine mit verstärktem Werkstückspindelstock zum fliegend Schleifen von schweren Werkstücken. Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 5064, Please let us know your asking price. Sale only within Europe, incl. Turkey Robot is not scope of supply - Robot not scope of supply Technical data see hand out Without packaging; any warranty rights are excluded. Dkjdpfxju Rdm Uj Aggot Should you wish to dismantle the system yourself, please inform us accordingly in your bid For the correctness of the technical data, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Year of construction: 2016, condition: ready for operation (used), A Jung CNC surface and profile grinding machine is available. Grinding dimensions X/Y: 300mm/600mm, table dimensions X/Y: 300mm/1000mm, spindle center to table distance: 150mm-600mm, max. table load: 400kg, table height: 925mm, travel X/Y/Z: 600mm/450mm/345mm, feed rate X: 40m/min, feed rate Y/Z: 4m/min, grinding spindle speed: 5000rpm, max. grinding wheel dimensions X/Y/Z: 400mm/60mm/127mm. Machine dimensions X/Y: approx. 3300mm/2300mm, weight: approx. 4500kg, control: Siemens 840D sl. Including accessories. Documentation available. An on-site inspection is possible. Dkodpfx Agezg Iqnsget

Condition: like new (used), Year of construction: 2016, operating hours: 31,881 h, grinding length: 3,350 mm, total width: 3,600 mm, total length: 9,400 mm, total height: 2,000 mm, grinding diameter: 595 mm, distance between centers: 3,000 mm, Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): 85 Maximum taper correction (mm): ±0.1 Equipment Tailstock diamond dresser with diamond holder Diamond Grinding wheel guards according to ISO, OSHA, and UNE standard +Two-door enclosure Paper feeder and magnetic separator Grinding wheel balancing shaft MARPOSS electrodynamic balancer Grinding wheel safety sensor Touch-type axial positioner with T25 probe Grinding wheel chuck Dkedpfsyudtpjx Aggot Driving dog sets Basic machine dimensions / weight Length (mm): 9400 Width (mm): 3600 Height (mm): 2000 Weight (kg): 15000 Air or water through spindle center DXF import function Spindle 2, workpiece unloader Working time hours Under power: 31881 Spindle 1: 8860 Spindle 2: 9774 Rated power kVA: 61 Basic machine dimensions / weight Length mm: 4200 Width mm: 2600 Height mm: 2586 Weight kg: 15000

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: 21i-TB, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, number of axes: 3, This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4" color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. - completely overhauled in 2026- Operating Hours: 0h after overhaul- Center Height: 175 mm- Center Distance: 1000 mm- Machine Base: Mineral cast Granitan S103- Strokes: 285 mm (X-axis) x 1150 mm (Z-axis)- X-axis Drive: AC Servomotor and ball screw, 0° angle, feed rate 0.001–5.000 mm/min- Z-axis Drive: AC Servomotor and ball screw, feed rate 0.001–10.000 mm/min- Measuring System: Incremental scale for X and Z axes, resolution 0.0001 mm- Grinding Headstock: Universal for external and internal grinding, Hirth serration 1° (-15° to +195°)- Motor Spindle (Pos. 2): 7.5 kW, 1400 to 3200 rpm, programmable cutting speed max. 50 m/s- External Grinding Guard: Wheel size D. 500x63mm F1 (80mm F5) with automatic contact protection- Internal Grinding Spindle (Pos. 3): Studer belt-driven internal grinding spindle (180°) with frequency inverter- Workhead Stock: Universal, roller bearing mounted, taper MK5, cylindrical outer nose D. 70mm, spindle bore D. 28mm, manual spindle lock- Workhead Drive: 1.8 kW AC Servomotor, speed range 1–1500 rpm, jog speed 1–50 rpm- Workpiece Weight: Max. 80 kg between centers- Tailstock: Taper MK4, 35 mm stroke, quill diameter 50 mm, hydraulic quill retraction with monitoring, manual fine adjustment +/- 0.04 mm- Pneumatic Lifters: Pneumatic lift-off for easy shifting of workhead and tailstock- Control System: Fanuc 21i-TB with 10.4" color touch screen, integrated PLC, 32KB user memory, 400 program storage slots- Power Supply: 400V +/- 10%, 50 Hz +/- 1Hz, 24V DC control voltage Optional Equipment: - Dittel Sensitron 6 contact detection with magnetic sensor (1 pc)- Movomatic C25 LP active probe- 3 pcs levelling elements- Air conditioning unit for electrical cabinet- Euchner hand-held control unit- Swiveling dresser for internal grinding- Park position for tailstock- 3 pcs Studer belt-driven internal grinding spindles (24,000 rpm / 40,000 rpm / 60,000 rpm)- Foot pedal for C-axis override with open doors- Foot pedal for clamping device actuation (tailstock)- Electrical interface for rotary dressing (spindle optional)- Movomatic in-process gauge control ES 124 control (measuring head optional)- 8 pcs used grinding wheel flanges for external grinding- Various new MK4 centers- Various dressers Dodpfxozwd Hgs Aggokt Additional Capabilities: - Capable of thread and form grinding (software must be requested directly from Fritz Studer AG)

Year of construction: 2012, condition: good (used), Motor grinding spindle, grinding spindle, high-performance grinding spindle Dkedpfxokpwqms Aggot -Manufacturer: FS / JE, motor grinding spindle from CNC machining center Santenberg GTC S 2 -FS Heinz Fiege: Type: HSP 190 182.532.01 -JE Jaeger- engineering: Type PS 200/6300min/1 GS-100-0009 -Spindle: JE type 9SH1020A042000 -Dimensions: see photos -Number: 2x spindle available (1x right, 1x left) -Price per piece -Dimensions: 820/610/H530mm / 820/500/H520mm -Weight: 185kg / 180kg