Conturo Matic

T&S CV300

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF-KBK1, DEMAG KBK crane sky crane track dimensions approx. 12m x 3.5m Please inquire about other dimensions! Iodpfx Aopiarnsg Usau Payload / lifting load 125 KG - 0.125ton Technical data of the system: Crane track made from Demag KBK1 rails The system is delivered complete: KBK rails, rail connectors, chassis, end plates, cable drag, power supply, holders/suspenders etc. including 1 bridge with 125KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location is 75053 Gondelsheim Shipping by courier or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please ask for your crane runway with cantilever capacity and dimensions.

Condition: refurbished (used), Year of construction: 2020, machine/vehicle number: PM_1000, Used polishing machine for manual processing. Iaedpfx Agofiugue Ueu Drive power 5.5 kW Polishing discs diameter - 1000 mm

Condition: excellent (used), Year of construction: 2008, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, ZEISS ACCURA MASS 7/9/5 Year of manufacture: 2008 Refurbished: 2025 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm MPE E = 1.6+L/333 at 18-22 °C R0 = 1.7 MPE-P = 1.7 MPE-THP = 2.5/50 sec Iasdpjyxdmfofx Ag Ueu RONt = 1.7 Machine features, equipment: C99 SR VII Controller automatic temperature compensation VAST XT GOLD sensor system probe changer magazine selectable probe accessories selectable calibration sphere HP Workstation with monitor Software: Calypso Basic, latest version Options: Calypso freely selectable Further accessories

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 4,9 [kW] - Spindle speeds : 16.000 [rpm] Iodexzu T Sspfx Ag Ujau LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30.000 [mm/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 23.456 [h] - Number of working hours : 16.703 [h] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - CNC option : extanded Memory 500 Mo - CNC option : High accuracy mode BⅡ - Type of divisor : 4e axe CNC intégré * manufacturer : YUKIWA * model : DRC170-EU * travel 4th axis : 360 [°] * indexing precision 4th axis : 0,001 [°] * clamping diameter : 140 [mm] * center height : 135 [mm] * with counter bearing * Coolant tank : 150 [l] * with high-pressure pump : 15 [bars] * With cabin washing - Coolant through spindle - Tool probe - Electric transformer

Condition: good (used), Centerless grinding machine HERMINGHAUSEN SR40 III CNC Iasdpfxjgq Ddfo Ag Ueu

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: 840 D solutionline, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Manufacturer: DMG MORI Pfronten Model: DMC 85 monoBLOCK RS3 Year of manufacture: 2014 Control system: Siemens 840D solutionline Shopmill Iajdpfx Agszamn To Uou Approx. 22,500 program hours Main spindle Interface: SK40 DIN 69871 Speed: 20-14,000 /min Spindle replaced by DMG MORI approximately one year ago Tool changer Type: Double gripper with three-phase motor Magazine: 60 positions X: 935 mm Y: 850 mm Z: 650 mm A: +/- 120° C: 360,000 * 0.001, continuous 5-axis simultaneous machining: YES Automation: DMG MORI RS3 Number of pallets in the system: 3 Additional pallets: 2 Equipment 3D measuring probe Operating mode 4 Extraction system IKZ 40 bar with belt filter system Chip conveyor Coolant gun Hydraulic clamping system Media feedthrough through the pallet WITHOUT the clamping devices and tool holders shown in the images!

Year of construction: 2022, condition: new, machine/vehicle number: RPM500_OSZ2, Robot - polishing machine RPM500_OSZ2 Oscillation (50 mm) and delivery (100 mm) Polishing discs DM - 1000 mm Power - 4 kW Extraction support - 100 mm Ijded Dt D Iopfx Ag Usau There are two piece

Condition: ready for operation (used), Rotary indexing center RT100/12-26 Manufacturer: Pfiffner Iasdpfx Agoi Ewn Es Usu Serial number 1101141101 Switch-on hours 42.500 footprint 14m x 8m

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Working area Grinding length: 250 mm Centre height: 100 mm Workpiece weight: 30 kg Z-axis: 350 mm Table adjustment: 8 ° degrees X-axis: 190 mm Grinding spindle Grinding wheel diameter max.: 500 mm Grinding wheel width max.: 80 mm Iaedpfx Agsvz Snkj Usu Grinding wheel bore: 127 (203) Grinding wheel motor power: 5.5 kW Peripheral speed: 50 m/s Grinding wheel protection cover: D500 x 80mm Workpiece spindle Speed: 1 - 2,000 rpm Workpiece spindle mount: MK4 Tailstock Tailstock quill mount: MK3 Tailstock quill stroke length: 30 mm Cylinder fine adjustment range: ± 0.04 Equipment Paper belt filter system Rinse gun Mechanical fume extraction

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Iaodpfx Agsfz Dube Uju Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.