Circular shear

TIMAC TZZ-1604

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D Gkedpjxr Utaefx Aaneb • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC circular shear with adjustable blades and diameter adjustment system. Automatic double-station stacker with suction-cup arm and interlocked safety doors. Integrated pneumatic and electrical systems with Unidrive inverters and a single control cabinet. Two control panels—one for each machine group—each with a touchscreen, interconnected to ensure communication and coordination between the LARA and TIMAC sections. Table for sheet scrap removal and LARA shear. Main technical data: Maximum strip width: 1,400–1,600 mm (maximum 1,400 mm on straightener) Sheet thickness: up to 3 mm (carbon steel) / 1.5 mm (stainless steel) Blade diameter: 100 mm Installed power: approx. 16–20 kW Electrical supply: 400 V / 50 Hz Working pressure: 6 bar Overall dimensions (approx.): 8.8 m (L) × 6.8 m (W) × 3.3 m (H) (L-shaped configuration, with side loading and stacking zones)

Condition: used, LVD Shear Type HST C-10/31 Capacity 3000 x 10 Gkodsx Tqtbepfx Aanjb

Condition: excellent (used), Year of construction: 2014, Flanging and dishing machine LUCAS - RD-3800 R MACH-ID 9280 Make: LUCAS Type: RD-3800 R Control: Siemens Simatic Year: 2014 Maximum diameter 3800 mm Minimum diameter 710 mm Thickness 40N/mm2 up to 6 mm Thickness 30 N/mm2 up to 8 mm Thickness 70N/mm2 up to 5 mm Flanging height 90 mm Working speed flanging 0 - 20 M/Min Working cutting speed 0-30 M/Min Tooling package included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gsdpfx Aexta E Rjanjkb

Condition: excellent (used), functionality: fully functional, Cutting Length 6100mm Cutting Capacity 25mm Angle 0.5-2.5 Strokes per minute 3-5. Gedpfjygd Ausx Aanekb Number of hold downs 36 Blade gap 0.005-3.00 Throat Depth 500mm

Condition: excellent (used), Technical data: Gedpfxjyxvgqe Aanskb Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm total power requirement 37 kW weight of the machine ca. 20 t Gsdpfx Aaoy Diahenekb dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: used, Year of construction: 2002, sheet width 3050 mm Gsdpfx Asxacfgjanjkb plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, plate thickness 2.5 mm Gksdoxaaw Hspfx Aaneb throat 260 mm distance between roll centers 92.0 mm weight 295 kg range L-W-H 1200 x 700 x 1200 mm Equipment: - 3x pairs of beading and flanging rollers included in delivery - robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - for the economical production of a wide variety of bead types - high accuracy thanks to precision-mounted shafts - Clearly arranged switching elements - Base frame equipped with storage compartment - powerful drive motor, even under continuous load - mobile foot switch for clockwise and counterclockwise rotation

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Gkodeza D U Djpfx Aanjb Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 1991, Equipment: foot remote control, type plate available, Circular Shears Manufacturer: Prinzing Type: KSE 25/10 Year of Manufacture: 1991 -used- Thrust: 350 mm For sheet metal up to 2.5 mm Sheet thickness - Cutting gap Gkedpfswmqdgox Aanjb 1.00 mm - 0.05 mm 1.50 mm - 0.10 mm 2.50 mm - 0.15 mm Includes additional replacement blades as shown. The machine can be tested/demonstrated on-site under power. All information is provided without guarantee. Subject to prior sale.