Radial Drilling Machine

TOS / MAS VO 50

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t Fsdpfx Ahst Ucgaepogd

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis Fsdpfx Ahekwcdbspjgd 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, year of last overhaul: 2004, 4-Hi CRM Rolling Mill Head – Froehling Froehling is a renowned brand known for its reliability and robustness in the rolling mill industry. 4-Hi rolling mill head with bending and tension control. The following are its features: Manufacturer: FROEHLING (Germany) – Refurbished in 2004 Material processed: Aluminum alloys – brass – copper – low-carbon steel Strip width: 282mm (300mm) Strip thickness: 0.15 – 2mm Coil dimensions: ID 400mm – OD 1500mm Maximum rolling speed: 400m/min Work rolls: Diameter 130mm – Face 340mm Back-up rolls: Diameter 390mm – Face 335mm Complete with: Uncoiler and coiler Many sets of spare work rolls and back-up rolls Sold EXWORKS, disassembled and loaded onto a truck. Fedpog Ryqksfx Ahpogd Ready for any inspection by a prospective buyer. For any questions, please do not hesitate to contact us. IF YOU ARE INTERESTED, PLEASE SUBMIT YOUR OFFER; WE ARE SURE WE CAN REACH AN AGREEMENT.

Condition: used, Year of construction: 2007, operating hours: 33,122 h, Hermle simultaneous 5-axis CNC machining center Type/Model: U 1130 Condition: Used Year of manufacture: 2007 Operating hours: 33,122 h Spindle hours: 12,054 h Technical data: Travel range X/Y/Z: 1130 (1300) mm x 720 mm x 630 mm Feed rate: Manual / setup mode: 1 - 2000 mm/min Programmable X-Y axis: 1 - 30000 mm/min Programmable Z axis: 1 - 20000 mm/min Rotary table: Tool interface: SK 40 Total connected load: 32 kW Space requirement (L/W/H) approx.: 3.66 m x 4.38 m x 2.57 m Weight approx.: approx. 10 tons Equipment: - Heidenhain iTNC 530 control system - Heidenhain TS 640 infrared measuring probe Fgodpfx Aezfg U Nshpjd - 16-position tool changer - incl. SK 40 tool interface plus various tools - Machine vise - IKZ (internal coolant supply) - Paper band filter - Oil cooler - Chip conveyor - Control cabinet air conditioning - RS 232 interface - LAN interface Costs for delivery by freight forwarder to the curb, see shopping cart or individual offer for inquiry items.

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Fgjdpfxew Rlvqo Ahped Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: good (used), Year of construction: 1998, Max. Pitch circle diameter External gearing 300 mm Max. Pitch circle diameter internal gearing 300 mm Max. Outer diameter of workpiece (equipment) 450 mm max. module 6 gear hobbing width -max. 100 mm Max. Helix angle (with tool Ø 125 mm) +/- 45 ° strokes - infinitely variable 130 - 1300 Hub/min workpiece weight 1000 kg Minimum distance table top - tool spindle -55 / +300 mm Maximum distance table top - tool spindle 200 mm Maximum distance table top - tool spindle 350 mm Manual Upright side shift +/- 25 mm Manual swivelling angle of the tool spindle +/- 0,5 ° Max. Tool speed 15 UpM Max. Workpiece speed 27 UpM Max. Tool diameter 7 Zoll voltage 400 V frequency 50 Hz Max. Line power 70 A total power requirement 48 kW Fgsdpfxevu E Nuj Ahped weight of the machine ca. 11 t dimensions of the machine ca. 4,27 x 3,11 x 2,87 m taper in main spindle SK 45 table hole 40 mm control Siemens Sinumerik 840 C Gleason PFAUTER gear shaping machine Mod. PSA 300 The CNC modular gear shaping machine with skiving cutter for the machining of external and internal cylindrical gears, with straight or helical involute with straight or helical involute toothing, as well as any other profile splitting process. The work cycle is controlled by a CNC unit, with specific software for machining the gears, machining. Field of application --> The PSA 300 has been designed for the production of: - Gears with straight external teeth - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Condition: used, Year of construction: 2001, Technical details: x-travel: 2500 mm y-travel: 1000 mm z-travel: 750 mm table surface area: 3220 x 1000 mm Workpiece weight approx.: 3000 kg spindle taper ISO: 50 milling spindle turning speeds: 20 - 5000 U/min feed speeds: 1- 30000 mm/min rapid traverse: 30 m/min total power requirement: 40 kW dimensions of the machine ca.: 6,9 x 4,1 x 3,7 m weight of the machine ca.: 21 t Fgsdpfx Ahsvptmwepjd with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders *

Condition: good (used), CHARACTERISTICS Plate diameter ⌀; 3200 mm Maximum turning/turning diameter ⌀; 3300 mm - With upright forward; 3300 mm - With upright set back; 5600 mm Min. turning/turning diameter ⌀ - With advanced upright; 800 mm - With upright set back; 3100 mm Fgsdsr I Aykspfx Ahped Max turning height; 750 mm Control; FAGOR 8025 Spindle RPM (2 ranges); - 0,5 - 10 rpm - 10 - 40 rpm Motor Power; 80 hp Maximum table load; 30.000 kg

Condition: excellent (used), KD-PUTZ with oil lubrication Completely made of stainless steel Sheet metal polishing machine for perforated sheets and regular sheets with 2 edges Fjdpsgh A Svjfx Ahpsgd For 60x80 sheets, edge on the short side In top condition Connection: 16 Ah

Condition: used, Year of construction: 1999, x-travel 4000 mm y-travel 1000 mm z-travel 1500 mm Control Heidenhain 355 weight max. 10 t Fgjdpfoxzuz Nox Ahpod ja more pictures available