Table boring mill

TOS VARNSDORF WRD 150 CNC

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Cedpfoxrcnlsx Ab Dehb

Year of construction: 1981, condition: excellent (used), faceplate diam 1300mm Codpfx Ask Dz N Ijb Dohb max turning diam 1100mm range of turning diam 460-1250mm

Condition: used, Year of construction: 2010, Technical details: x-travel: 800 mm y-travel: 685 mm z-travel: 630 mm c-axis: 360° (Planscheibe-Tisch) control: Siemens 840D Power Line spindle speed:: 10.500 - 20.000 U/min max. torque on the spindle: 180 Nm tool taper: HSK -A63 DIN 69893 tool changer with: 40 places no. of tables: 2 table swivelabel +/-: je 120 (a-Achse) ° table surface area: 280 x 275 mm table load capacity: 320 kg interface: RS232 spindle hours: 38.700 h Total power requirement: 37 kW Cjdpfx Abjytcf Uj Dshb dimension machine approx.LxWxH: 4,0 x 4,4 x 3,0 m dimensions LxWxH: Späneförderer: 2,1 x 1,05 x 1,5 m dimensions L x W x H: Kühlschmieranlage: 1,3 x 1.6 x 1,95 m 5 - axis machining center CNC machining center Clamping table for 4th and 5th axis (swivel 120° right/left/speed 50 rpm and turn with faceplate Ø 280mm/200 rpm) max. workpiece size 940 x 650mm for/on table with chip conveyor make Knoll, 750 K-1/150; year of manufacture 2009 Bürener coolant system with paper belt filter belt width 700mm; year of manufacture 2009 for both control cabinets with cooler Rittal Accessories exclusive i.D. *

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Cjdpfx Abour H I Ne Dehb Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK Chjdpfx Abszipzys Dsb - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Chjdjxgu R Iepfx Ab Dsb Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: excellent (used), Year of construction: 1987, pressure 320 t plate thickness 0 mm no. of strokes 80 Hub/min pressing capacity total 320 t stroke 30 - 80 mm table surface area unten: 630 x 740 mm table surface area oben: 630 x 630 mm total power requirement 60 kW Chodsvwgl Njpfx Ab Deb This fineblanking press FEINTOOL HFA 320 was completely overhauled in 2019 and is in new condition with new CE mark MAIN RAM total force (nominal) 320 to stroke min. 30 mm stroke 80 mm V-RING nominal force 160 to stroke 30 mm COUNTER RAM nominal force 80 to stroke 30 mm TOOL DIMENSIONS lower table - width 630 mm lower table - depth 740 mm upper table - width 630 mm upper table - depth 630 mm daylight max. 320 mm ELECTRICAL SPECIFICATIONS total power consumption 60 kW

Condition: ready for operation (used), Gear shaping machine STANKO 5M150 Max. diameter of gears that can be cut: 800 mm Max. module: 12 mm Max. cutter stroke: 200 mm Saddle indexing gear diameter: 360 mm Distance between axes (tool and table): 0-700 mm Largest tool diameter: 200 mm Cutter arbor diameter: 44.443 mm Taper: M5 Table diameter: 800 mm Distance from floor to table: 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double stroke per minute (s.p.m.): 33-188 mm Range of table feed rates per cutter double stroke: -Circular: 0.2-1.5 mm -Radial: 1-5.4 mm Table rapid rotation speed: 1.7 rpm Codpsqcvkvefx Ab Dohb Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimensions: 3100x1800x3500 mm Weight: 10200 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm Csdpfxon D N H Tj Ab Djhb • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a dual miter saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all miter angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. Connection to window construction software (orgadata / Unilink / Wictop... etc.) is possible. Cjdpfx Abjzav U Ne Dohb The machine features the following equipment: - Industrial PC - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting - Crosscut - Automatic cutting - Connection to external software possible (Orgadata, Unilink, Wiktop... etc.)