TRUMPF TruBend 5085

TRUMPF TruBend 5085

Condition: ready for operation (used), Year of construction: 2015, operating hours: 61,469 h, controller manufacturer: TRUMPF, controller model: TASC 6000, This TRUBEND Cell 5000 with TruBend 5085 extended version (2720 mm x 850 kN) and BendMaster 60 was manufactured in 2015. World's first bending automation with image recognition for maximum flexibility. Sheet metal parts up to 40 kg, 6-axis backgauge sensor technology. Maximum repeat accuracy thanks to angle sensor technology (ACB) in automated operation. It features a stable all-steel frame, electro-hydraulic top drive, and a modern block hydraulic system. The control unit is a TRUMPF TASC 6000 with a 15-inch touchscreen and network capabilities. Ideal for precise bending operations, consider the opportunity to buy this TRUMPF TruBend Cell 500 press brake. Contact us for more information about this machine. • Machine: TruBend 5085 (2720 mm x 850 kN) with BendMaster 60 • Stable all-steel machine frame • Press beam with spherical bearing and tilt adjustment • Electro-hydraulic top drive with 4-cylinder technology • Generous edge clearance • Flat front covers • Modern block hydraulics • Electronic pressure balance • Measuring system with glass scale and spring compensation • Hydraulic oil in the machine (lifetime lubrication) • Oil cooler • Control cabinet cooling via air-to-air heat exchanger • Modern machine design • Stop/Backgauge • Stop system • Backgauge system: 2 axes (X and R) • Tool clamping • Upper tool holder, manual clamping, hardened • Lower tool holder, hydraulic clamping, hardened • Lower tool shift, 2 positions, pneumatic • Crowning • Manual crowning • Control • TRUMPF TASC 6000 • Graphical workshop programming • Windows XPe (embedded), Pentium 4, 2.8 GHz Codpfx Aex Imqled Negn • 2 GB RAM • 15-inch touchscreen • Network-enabled • Teleservice via modem • Operation • Control panel with LCD keypad and foot switch • Communication rail • Safety • Standard safety devices • BendGuard safety device for upper tools up to 390 mm • CE marking Additional equipment • TRUMPF BendMaster automation (standard features) • Robot/Handling • Stable base and manipulator in die-cast aluminum • Load capacity 60 kg (workpiece plus gripper) • Low-profile welded floor track • Sheet metal sensor for contour detection • Rotary feedthrough for easy gripper change • Gripper coupling on the BendMaster • Sensors for 4-axis backgauge system • Electric drives • Double sheet detection • NC gripper transfer station • Vacuum generation for suction grippers • Control • TRUMPF PC control with operator terminal • Teleservice via modem • Operation via screen, mouse, and keyboard • Safety • Safety fence with access doorWorld's first bending automation with image recognition for maximum flexibility Sheet metal parts up to 40 kg, 6-axis backgauge sensor technologyMaximum repeat accuracy thanks to angle sensor technology (ACB) in automated operationTruBend 5085 (2720 mm x 850 kN) with BendMaster 60

Condition: used, Year of construction: 2021, Working area 3000 x 1500 mm Max. laser capacity 4 Kw (TruDisk 4001) Max. thickness 25/20 mm (Mild steel/Stainless steel) Integrated camera for process surveillance (with monitor interface) Control: Siemens Sinumerik 840 D SL Cgjdpfsxr U U Rjx Ad Non with 18” touch screen Automatic speed regulation Programmerbel automatic shut down of the machine Kobber cutting package Brass cutting package Equipped with: Automatic pallet changer Price when bought in 2021: Euro. 365.000

Condition: used, Year of construction: 2016, Milling machines Travel distance X: 600 mm Travel distance Y :560 mm Travel distance Z: 210 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Siemens 840D_sl spindle chuck: SK 40 spindle revolutions: 12000 rpm table size X: 900 mm table size Y: 560 mm max. workpiece weight: 400 kg tool changer: 30 - time Cedpfsvtfp Eox Ad Nsgn feed rate: 30000 mm/min

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 44,509 h, laser hours: 28,133 h, laser power: 4,000 W, Standard Equipment Machine • Closed machine frame • Integrated cabinet • Torque drive in combination with linear direct drives • Closed beam guidance via laser light cable (LLK) • Cooling unit • Integrated switch cabinets with interior lighting • Automatic longitudinal pallet changer • 17" touch color screen • Longitudinal conveyor belt • Workspace lighting • Positioning laser diode • Spraying device • PierceLine • FocusLine • NitroLine • PlasmaLine • Microweld • Automatic nozzle cleaning TRUMPF Laser • Integrated solid-state laser TruDisk 4001 with 1 LLK output • Excitation via pump diodes • Laser power control Cutting head • Universal cutting unit • Cutting head strategy • Protective glass against lens contamination • Condition check of the protective glass • ControlLine: height control and sheet metal edge detection Control system • SINUMERIK 840D SL control • Simple workshop programming • Fast reproduction • Integrated technology data • Automatic shutdown • Programmable cutting gas pressure • Multi-sheet processing • FastLine • FlyLine • AdjustLine Data transmission • USB interface • RJ-45 network connection • Wireless Operation Point (basis for Visual Online Support) Safety • CE marking • Light barriers • Multi-chamber extraction system • Compact dust removal system • Machine enclosure, certified viewing window, right door • Sliding roof Extended equipment • Nozzle changer • Wide transverse conveyor belt • Left sliding viewing door Cjdpfjwrplyjx Ad Negn • Liftmaster • Loading station • Sheet separation of thin metal (s=0.8-2.0mm) • Construction steel rake (prong spacing 33.5mm) • Third position • Swivel range 180° The Liftmaster is included in the offer The machine can be inspected under production conditions Price ex works Supplier PeterHoppe GmbH 32832 Augustdorf

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 9,367 h, machine/vehicle number: TRUMPF 5040 FİBER L76, laser hours: 3,715 h, laser power: 8,000 W, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 4,000 mm, table width: 2,000 mm, table height: 800 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, positioning speed: 280 m/min, positioning accuracy: 0.03 mm, workpiece weight (max.): 4,000 kg, power: 8 kW (10.88 HP), input voltage: 400 V, compressed air connection: 6 bar, total length: 14,000 mm, total width: 8,000 mm, total height: 2,000 mm, year of last overhaul: 2022, space requirement height: 2,000 mm, space requirement length: 14,000 mm, space requirement width: 8,000 mm, working range: 20,004,000 mm, Equipment: cooling unit, documentation/manual, safety light barrier, HIGH SPEED ECO CUTTING PACKAGE Codpfx Aowf Ipqed Nsgn DETECTLINE DROP&CUT INTEGRATED CAMERA FOR PROCESS IMAGING COMPRESSED AIR CUTTING PACKAGE TRUTOPS BOOST

Condition: excellent (used), Year of construction: 2020, operating hours: 5,000 h, functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness aluminum (max.): 4 mm, Line Salvagnini in perfect condition configuration : MD1.30 store + S4.30xe punching machine + IA3015 unloading device + ACN manual loading panel bener, + RIP turning device+ P4L 2516 panel bender 2.5m bending + SAP unloading device Csdev Icmqspfx Ad Njgn

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Csdpfexndynox Ad Njgn Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2015, controller manufacturer: Sonstige, controller model: TASC 6000, _____ Description: Year of manuf. : 2015 Control : Sonstige TASC 6000 Technical data Year of manufacture:2015 Press force approx.:3200 kN Bending length approx.:4420 mm Control system:TASC 6000 Reach:420 mm Free stand passage approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:22,800 kg Cgodpfjyfyxcex Ad Nsn Total connected load approx.:42 kVA Tool:included in scope of delivery : Equipment :- Stable machine frame :- Press beam, stress-relieved annealed with high bending strength :- Spherical mounting of the press beam (inclined position) :- (On-Demand Servo Drive) 4-cylinder technology :- Length measuring system Y axis with spring compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Switch cabinet air conditioning Extended equipment :- Upper/lower tool clamping, hydraulic :- CNC crowning :- CNC-controlled lower tool displacement :- 6-axis backgauge system with 2 stop fingers :- BendGuard :- 2x support brackets :- Bending aid :- Table extension :- Angle assistance package :(consisting of ACB Wireless and TCB) :- MobileControl pro :- DMS :- Optical set-up and positioning aid :- Rear work area lighting :- Front work area lighting :- 2x foot switches :- Pneumatic, programmable lower tool displacement

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: NTX 2000/1500 2nd Gen Year of manufacture: 2020 Control: Celos Fanuc F31iB5, Mapps 4 Technical Data: Maximum turning diameter: 670 mm Turning length: 1,538 mm Bar capacity: max. 65 mm Travel axes: X1 axis: 675 mm Y axis: ±150 mm Z1 axis: 1,562 + 164 mm B axis: ±120° A axis: 1,542 mm X2 axis: 200 mm Y2 axis: ±40 mm Z2 axis: 1,542 mm Main spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Counter spindle: Maximum spindle speed: 5,000 rpm Drive power: 15/15/11 kW Torque: 421/302/256 Nm Spindle nose: JIS A2-6 Spindle bore: Ø 73 mm Milling spindle: Speed range: 0–12,000 rpm Drive power: 28/23 kW Tool holder: Capto C6 Number of tool positions: 76 Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: No. of tool holders: 12 Speed of driven tools: 12,000 rpm Square tool shank length: 20 mm Boring bar shank diameter: Ø 32 mm Drive power: 5.5/5.5/3.7 kW Torque: 16.9/13.1/8 Nm Rapid traverse: X axis: 50 m/min Y axis: 40 m/min Z axis: 50 m/min A axis: 36 m/min X2 axis: 25 m/min Y2 axis: 18 m/min Z2 axis: 40 m/min B axis: 100 rpm Through-bore clamping device: Ø 67 mm Operating hours: approx. 15,050 h Spindle hours: approx. 4,210 h Technical features and accessories: - Kitagawa 8-inch through-bore chuck BB208A621 Ø 210 mm on main and counter spindle - Dual foot switch for spindle 1 and spindle 2 - Chuck cylinder stroke monitoring (linear position monitoring) for spindle 1 and spindle 2 - Full indexing of the tool spindle - Turret tailstock function - Suitable coolant: water-soluble coolant - Chip conveyor - Hydrajet MS30-1000/70 bar coolant system Cgodpeyfl N Tofx Ad Nsn - Coolant chiller - Air blast device for chuck (spindle 2) - Interface for mist extractor - Manual tool presetting device installed on the machine (removable, spindle 1 and spindle 2) - Fully closed control loops for X, Y, and Z axes (tool spindle) - In-machine workpiece measuring system, Renishaw RMP600 - 4-color signal tower - Multi-dry filter - Voltage: 380 V, Frequency: 50 Hz - Alternating spindle speed - Prepared for 3D quickSET - Open pocket and island milling - High-speed fixed cycle - X-axis direction, JIS/ISO-compliant - 3D machine model - Transformer Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: like new (used), Below you will find the complete equipment of the offered machine, structured clearly and presented in an organized manner. ⸻ Material Handling & Safety • Work area lighting, rear • 2D code scanner Material Handling • Support console with plastic overlay • 3× ball roller supports (for bending aid / support console / table extension) • 3× brush supports (for bending aid / support console / table extension) • Bending aid first arm with plastic overlay • 2× table width extensions with plastic overlay • 3× table length extensions (for bending aid / support console / table extension) • Parking position right 900 mm Safety • BendGuard ⸻ Automation – ToolMaster (KB29) Machine Base • Stable steel architecture with concrete foundation • Upper tool storage with CNC rotary axis • Lower tool storage with CNC rotary axis • Push-chain manipulators for upper and lower tools • Magnetic gripper system • Position monitoring • CNC turn-over and transfer station for upper tools • Transfer station for lower tools • Right-side machine placement • Control cabinet climate control for ambient temperatures up to 40°C Control • LENZE, integrated into TruBend machine control Safety Equipment • Light curtain (vertical & horizontal) with fixed reflector • Communications rail • MobileControl • Standard safety devices • Side sliding doors • Rear rolling shutter ⸻ Standard Machine Equipment Machine Construction • Robust machine frame • Press beam • Spherical support for press beam with tilt functionality • On-demand servo drive (4-cylinder technology) • Length measuring system (Y-axis) with dynamic deflection compensation • Hydraulic oil fill (lifetime fill) • Control cabinet climate control for temperatures up to 40°C Crowning • Manual wedge crowning Backgauge • 2-axis backgauge (X & R) • 2× backgauge fingers Tool Clamping • Manual upper tool clamping • Hydraulic lower tool clamping Lower Tool Movement • Pneumatically actuated I-axis Control • Touchpoint TruBend • Integrated TRUMPF technology data • Support arm with height adjustment • Network capability • Teleservice via Internet Operator Ergonomics • Foot switch ⸻ Extended Machine Equipment Increased Performance Features • Increased installation height/stroke: +230 mm • Increased working speed at maximum press force Crowning • CNC-controlled crowning Backgauge • 6-axis backgauge Tool Clamping • Hydraulic upper tool clamping Lower Tool Movement • CNC-controlled I-axis Cgjdpjx Aphgjfx Ad Nen Control / Operation • Keyboard & mouse (incl. holder) • Additional monitor • Shop floor programming: TecZone Bend Angle Assistants • ACB Laser – Automatically Controlled Bending • Angle assistant package (ACB Wireless + TCB) Other Operator Aids • MagicShoe function (incl. initial equipment) • MobileControl Pro • Tool indicator • Front work area lighting