Moving bezel

unbekannt Durchmesser 175 mm

Condition: used, Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 175 mm -Edition: plastic -Tip height: 250 mm -Drawings with the photos -Price: per piece -Number: 1x available Ihjdpfxjghncfj Addst -Dimensions: 560/100/H580 mm -Weight: 25 kg

Condition: used, Year of construction: 2007, Technical details: balancing body max.: 100 kg balancing body diameter: max. Ø 800 mm swing diameter: 630 mm Balancing revolution per minute: 120 - 1200 U/min drive power: 4 kW Weight approx.: 0,6 t dimension machine xH: 1,8 x 1,2 x 1,4 m dimensions electric cabinet: 650 x 700 x 1900 mm Vertical balancing machine The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Unbalance static=2 and dynamic=3 Ijdpfxjvc Apzo Addoht Measuring device CAB 803 Display Screen Computer RS232C Basic system dynamic unbalance in 2 levels Operation via control panel on the switch cabinet / 2x foot switch No printer available! *

Condition: new, table length 330 mm table width 220 mm x-travel 210 mm Ihsdoupw Twspfx Addst y-travel 125 mm table height 150 mm T-slots 12 mm weight 33 kg dimensions 0,41 x 0,35 x 0,22 mm Cross table with turntable

Condition: as good as new (ex-display), Year of construction: 2025, Power: 0.85, 1.5kW Speed range: 300 - 4000 rpm Speed steps: stepless spindle mounting: MK-3 Drilling stroke: approx. 105 mm spindle throat: 200 mm Weight: 152 kg Ijdpfx Aehpmbbsddoht

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line Iedpfxst Hwuvj Addsht contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: new, Load Weight Shelf 12000 kg Iodpfxefgyg Re Addoht Loading weight per level 2000 kg Number of load levels 6 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm dimensions 2,3 x 0,9(1,35) x 2,45 m

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Isdpfoc U U Udex Addsht Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Condition: used, Bezel, steady rest, lynette -Bezel: max. passage Ø 400 mm -Center height: 345 mm Ihedjiaqm Uspfx Addjt -technical drawing: with the photos -Total dimensions: 930/165/H890 mm -Weight: 98 kg

Year of construction: 1998, condition: excellent (used), 1/2 lunette steady rest suitable for diameter 500 mm Iedpfx Adofgwi Todeht SPH 450 mm quill diameter 100 mm

Condition: new, Load Weight Shelf 15000 kg Loading weight per level 3000 kg Number of load levels 5 Stk. Recommended material length 6000 mm Column width 2 x 2000 mm Shelf height 2440 mm Isdpefgyg Esfx Addsht dimensions m