Milling Device

UNBEKANNT Spannsysteme

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Ljdpfx Aephl Ecsh Ushr Machine weight: 10 Ton

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW Ljdot Hw Nyopfx Ah Uohr weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus

Condition: used, functionality: unexamined, spindle bore: 81 mm, turning diameter over bed slide: 650 mm, center height: 320 mm, turning length: 1,500 mm, Used lathe, see pictures. With Sony digital readout and 660mm faceplate. Year of manufacture: 1976. All technical specifications in the last picture. NOTE: The type plate states XD500, but it is actually an XD630, according to the dimensions and delivery note. Center distance: 1500 Lhsdpfx Ahowm Rvie Uor Trajectory length: 2500 Center height: 320mm With taper turning direction, side guide

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit Lhedpfsrxcu Sex Ah Uer

Condition: good (used), Year of construction: 1975, Meuser horizontal boring and milling machine model M 76 BF 5.5 kw Drilling depth 76 mm Spindle holder MK 5 Lhedst T Rkdopfx Ah Uor Table 1000 x 1000

Year of construction: 2002, condition: used, x-travel 210 mm z-travel 350 mm max. loading 25 kg Distance C/Z-axis (mm) 270 mm max. test diameter (mm) 300 mm Rotation axis C (turntable) 0° 90° 180° 270° diameter of rotary table 150 mm Measuring path R-axis 170 mm required space L2,0 x B0,8 x H0,82 m Lhsdpfxsrxxc Ho Ah Uor Scope of delivery: - Form measuring system F1004/350 - Work table - Rotary table (rotation axis C) - All documentation - Software TURBO FORM 8.21 + licences - Accessories (see pictures) Condition: - As good as new - Functional Maintenance: - Last inspection on 03/08/2021 - Test report from Jenoptik available

Condition: new, Year of construction: 2025, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Tempering metals =ᐳ Marking many materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings using the JPT-MOPA system fiber laser source (variable pulse width on request) Easy to operate and handle! Our exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect engravings) • Scanner unit "New Generation ECO" • 19" PC control, no external card! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix using 2 parameters • TCP IP connectivity for external components • Industry 4.0 the status can be processed at any time via the TCP/IP protocol. Lodpfx Ajd S H Nveh Uohr • Input and output Outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Performance increase of up to 50% thanks to 64Bit • Improved stability thanks to integrated control card • Optional control of up to 4 axes (integrated) • Optional DEEP engraving with Z-axis • More powerful algorithms for fast hatching. • Completely redesigned Galvo generation • 2-way laser pointer for checking the focus position. • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • Protective housing in accordance with laser class 1 • Including 4 hours of training in our training center (max. 2 people) Do you need individuality? Of course. Choose from our wide range of accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for assembly =ᐳ Conveyor belts for infeed and outfeed =ᐳ 3D marking and ENGRAVING function. =ᐳ Automatic focus adjustment =ᐳ Rotating unit =ᐳ Motorized slides =ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers naturally allow for individual requests in terms of design and size! =ᐳ Made in Schweinfurt! Images may contain options! Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser marking, laser marking, laser engraver, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser, marking hero

Condition: excellent (used), Year of construction: 2020, Keyence KEYENCE XM-2000 with XM-H1000 – 3D Coordinate Measuring System (CMM) Professional handheld measurement system for precise 3D measurements directly in production environments. Item description: For sale is a used KEYENCE XM-2000 coordinate measuring system including the XM-H1000 handheld probe. This innovative system enables precise 3D measurements directly at the workplace – without a dedicated measuring room, complex setup, or special CMM expertise. The device is ideally suited for manufacturing operations, quality assurance, initial sample inspection reports (ISIR/PPAP), in-process controls, as well as for reverse engineering. Technical Data – KEYENCE XM-C1000 / XM-H1000 (XM Series) Measuring System (General) Specification: Measurement range (XYZ): approx. 600 × 300 × 200 mm (depending on setup) Measurement accuracy: ±(8 + L/80) µm (L = measured length in mm) Repeatability: ±3 µm (typical) Resolution: 1 µm Measuring principle: Optical tracking with camera-based detection Calibration: User calibration with calibration sphere possible CAD Comparison: Directly on the device (STEP, IGES, etc.) Export formats: PDF, Excel, CSV, DXF Tolerance analysis: Automatic with color mapping XM-C1000 – Control and Evaluation Unit (Controller) Component: Display: 15” touchscreen Connections: USB, LAN, HDMI, power Storage options: Internal + USB export Software functions: Measurement, CAD comparison, report generation Operation: Touchscreen + pushbutton operation Languages: Multilingual (including German) XM-H1000 – Handheld Probe Specification: Probe type: Handheld with pressure button Feedback: LED status indicator, vibration signal Probe tip: Interchangeable, various tips available Tracking: Detected via controller’s camera system System Characteristics Specification: Operating temperature: 10 – 35 °C Power supply: 100–240 V AC, 50/60 Hz System dimensions (complete): approx. 800 × 600 × 800 mm (depending on setup) Total system weight: approx. 25–40 kg (depending on configuration) Mounting: On table or optional measuring table Scope of delivery: KEYENCE XM-2000 control and evaluation unit KEYENCE XM-H1000 handheld probe XM-C1000 (Controller) Lhodowxvmdepfx Ah Ujr Camera unit / tracking module Connection cables and power supplies Condition: Used, fully functional, in very good condition. Shipping & Delivery: Shipping via freight forwarding Collection by appointment possible. International shipping available on request. If you have any questions, need further information or wish to arrange a viewing appointment, please feel free to contact us. (Subject to changes and errors in the technical data and information!) We are also happy to answer any further questions by phone.

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Lhedoqagtispfx Ah Ujr

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, total length: 2,400 mm, total width: 1,200 mm, Perforated table 1200 x 2400 x 200mm thickness of the table top 20 mm, diameter of the holes 28 mm Lhsdpjt U Rccefx Ah Uer with wireless remote control Swivel range 360° Height adjustment Hydraulic motor 800 to 1200mm Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment