Machine vice centric clamping

unbekannt

Condition: good (used), Tool holder, milling chuck, collet chuck, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Tool holder: Adjusting sleeves Ø28 mm 9 pieces -Recording: 5x MK2 / 4x MK1 -Submission/Price: complete -Transport dimensions: 200/90/H120 mm -Total weight: 3.6 kg Fjdpfeztwglox Ahvjgf

Condition: new, Year of construction: 2023, Container turning device 3000 Kg load capacity with hand and foot remote control speed infinitely variable 120 to 1200 mm / min. Fsdpfelypunsx Ahvogf diameter from 50mm to 3000mm Wheel size diameter 300mm x 50 dimensions per piece approx. 1680 mm x 550mm

Condition: used, A compact and lightweight portable extraction system for removing wood shavings and sawdust. Technical data: - Motor: 0.37 kW Fgedpfjztvwvex Ahvef - Length: 650 mm - Width: 500 mm - Height: 1,800 mm

Condition: used, A block separator or block trap in mint condition for sorting out wooden blocks in extraction systems. Technical data: - Pipe: 300 mm - Length: 1,170 mm Fjdpfx Ajztvwpohvegf - Width: 380 mm - Height: 820 mm

Condition: used, thickness of jaw 160 mm clamping capacity 24 kN weight of the machine ca. 31 kg Fgedpfxjd Ih N Rj Ahvjf mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation

Condition: used, A mobile extraction unit with a large filter area and a set of hoses for a small workshop. Technical data: - Extraction nozzle diameter: 160 mm - Motor power: 1.5 kW - Dimensions: 1,220 x 650 x 3,270 mm Fedpfx Ajztvwcehvogf

Condition: used, Year of construction: 1990, table length 3000 mm table width 2500 mm table height 300 mm total power requirement 0 kW weight of the machine ca. 5,2 t Fgjdpfx Ahsftfcwovsf dimensions of the machine ca. 3 x 2,5 x 0,3 m

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U Fedpfx Asfg U Ttehvegf spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: used, Year of construction: 1990, length 8000 mm Fedpfx Ahjv Ey Nqsvsgf width 3000 mm number 1 Plate thickness 400 mm weight of the machine ca. ca. 14 t dimensions of the machine ca. 8 x 3 x 0,4 m This plate has 10 t- slots in length direction each 32 mm wide.

Condition: used, Year of construction: 1990, length 4000 mm width 1500 mm Fgjdpfx Ahoftfchovef table height 500 mm total power requirement 0 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,5 x 1 m

Condition: excellent (used), machine/vehicle number: 721, Jaw width: 135 mm Back height: 39.6 mm Span: 140 mm Fgedpfxjd Rlinj Ahvof Clamping force: 35 kN

Condition: used, Year of construction: 1985, length 3000 mm width 2500 mm number 10 Fgodpfxex Avqhj Ahvjf Plate thickness 350 mm weight of the machine ca. 5,14 t dimensions of the machine ca. 3 x 2,5 x 0,35 m 10 pieces T- slotted floor plates with 32 mm slots.

Condition: used, Year of construction: 1990, table length 2500 mm table width 1250 mm table height 950 mm total power requirement 0 kW weight of the machine ca. 1,5 t Fjdpfx Aheftfcdsvjgf dimensions of the machine ca. 2,5 x 1,25 x 1 m plate is heated.

Condition: good (used), Machine vise, sturdy vise, drill vise Fgodpfx Ahefv Apzjvof -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: 150 mm -Dimensions: 425/240/H120 mm -Weight: 40 kg

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: Holder: Ø 127 mm -Mounting: Hole shaft cone Ø 45-58 mm -Type designation: 407x10-100x127 Quantity: 1x mounting flange available Fgjdpfx Ahewn Dlmjvsf -Dimensions total Ø 180 x 105 mm -Weight: 6.5 kg