Used accessories and spare parts for milling machines for sale (281)

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Fsdszcpg Dspfx Adcoph Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Handover: in its current condition as inspected -Condition: see pictures -Clamping angle: for workpiece clamping -Table surface: 730x610 mm, height 1595 mm -Wall thickness: 35/42 mm -Oblong hole: 25x150/25x105 mm -Dimensions: see photos -Number: 4x mounting brackets available Price: per piece Fodpszav Hrjfx Adcoph -Dimensions: 610/730/H1595 mm/piece -Weight: 658 kg/piece

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Fodpozav Dwefx Adcjph -Clamping angle: for workpiece clamping -Table surface: 1085x885 mm, height 2185 mm -Wall thickness: 70 mm -Threaded holes: M20 -Dimensions: see photos -Number: 2x mounting brackets available -Price: per piece -Dimensions: 885/1085/H2185 mm/piece -Weight: 2280 kg/piece

Condition: excellent (used), Stair Tensioner (28366) Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 Fpodpoln Ulaofx Adceh 4 pieces available Weight 8,5 kg

Year of construction: 1990, condition: good (used), CNC-4th axis NIKKEN type: CNC-200 year 1990 with counterholder and base plate. Fpodpfx Adegabu Uscsh

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Fpodpfshvz Iiex Adcoh Single sale demand inquiries.

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive Fpsdpeg Uf I Aofx Adcsh

Condition: excellent (used), approx. 100 roughing cutters (28474) Diameter 8 - 37 mm HSS Fpedpfxer Hbtyj Adcjh 1 drawer contents

Condition: good (used), Universal milling angle head, milling angle head -Recording: MK4 Fpodpsc Sc Ikjfx Adcoh -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

Condition: good (used), Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg Fpsdpfx Aeb A Nu Rsdcjh

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Fodpfoyf Dp Eox Adceph Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, GMN TS120x400-61913, spindle, SK 40 Fpsdjzbrlgepfx Adceh New

Condition: used, VERTICAL MILLING HEAD Accessory for a Fritz Heckert FSS 400 milling machine Weight: 285 kg Dimensions (LxWxH): 550 x 500 x 550 mm Swivels 90° to the right / left Clamping surface: 500 x 400 mm Taper: SK 45 Fsdpsv U I Slsfx Adcoph Flange diameter: D = 260 mm Mounting: 4 holes, diameter D = 17.5 mm *

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Fpedpfoxddwrox Adcsh Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: good (used), Transport shots, crane shot -Spare part: from a machining center, manufacturer Sigma, type Mission 5 -Hole: Ø 140 mm Fpedpfxscnf E Uo Adcsh -Recess opening: Ø 80 mm -Bolt circle: Ø 110 mm -Quantity: 4 pieces available -Price: complete -Weight: 23 kg

Condition: good (used), Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount Fpedpfjy H Ivmjx Adcsh -Dimensions: 910/1120/H510 mm -Weight: 365 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm Fpsdpfxey H Itrs Adcoh -Weight: 288 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg Fpodoy H Itlopfx Adceh

Condition: excellent (used), Dimensions and price depending on dimensions for one each stair trestle : 95 mm high. 10 euro 140 mm high 12 Euro 185 mm high 15 Euro 230 mm high 20 Euro Fpsdpfomn Ipujx Adcsh 275 mm high 22 Euro 320 mm high 25 Euro

Condition: good (used), Tool holder for SK 40 chucks -made from: Polypropylene copolymer Fpsdpfx Aedm Supodcsh -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price: complete

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Fpjdpfeyqwxdex Adcoh Power consumption: 35 kW Year of manufacture: 2011 Weight: 26,000 kg

Condition: used, diameter div. number 44x Fodpfxsxyzxfj Adceph tool adaptor SK 40

Condition: used, diameter div. number 36x tool adaptor BT 40 Fpodpfeww Nb Esx Adceh

Condition: used, diameter div. Fpjdpfxoww Nbxj Adceh number 40x tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Fjdpfxoww Nbfs Adcsph