Shaping machine

Uni-TECH S-315 TGi

Year of construction: 1998, condition: good (used), Make: UNION Type: Ti 1800 Year: 1998 Specifications Metric US Standard Table Length 2000 mm Table Width 1800 mm Table load 16000 Movement V-axis 1250 mm Rotation B-Axis 360.000 ° Rotation speed B-Axis 1,35 Omw/min. Movement speed V-axis 4000 mm/min. Dimensions (Estimate) Length Iiedekwcdbspfx Ab Aed 3400 mm Width 2000 mm Height 920 mm Weight 6500 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2300 mm Measurements depth 2800 mm Measurements height 2700 mm Ijdpsx D Ikpefx Ab Aeid Machine weight 4500 kg Main Drive Spindle speed range 10000 Spindle motor power CAT40 / SK40 Number of axis 4 Movement X-Axis Movement 762 mm X-Axis Rapid Traverse 24 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 24 m/min Z-Axis Movement 610 mm Z-Axis Rapid Traverse 24 m/min Table Tslots size 18 mm Number of tslots 5 Table load 750 kg This 4-axis Hurco VMX30 was manufactured in 2004. It features a CNC milling machine with a rotary table for 4th axis capabilities. Key specs include a 762 mm X-axis travel, 508 mm Y-axis travel, 610 mm Z-axis travel, and a table size of 1,016 × 508 mm. It supports a maximum spindle speed of 10,000 rpm and a tool magazine capacity of 24. Consider the opportunity to buy this Hurco VMX30 vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2022, Technical details: Pressure: 30 t stroke: 142,5 mm table surface area: 500 x180 mm passage opening in table: 500 x160 mm distance between columns: 1000 mm daylight dimension : table/slide up: 120 - 1020 mm machine weight approx.: 176 kg dimension machine xH: T: 0,8 x 0,8 x 1,8 m Simple hydraulic double column press - special construction welded from 20mm sheet steel. Table support with prism 260 x 205mm Iiodou N A Easpfx Ab Aed Lower beam installation height max./min.: 1031 / 151mm Table height above floor max./min.: 1290 / 300mm Vertical lower beam, adjustable, manual, 10 steps, 100mm distance between steps Plunger cheek Lifting cylinder Ø 63mm with plunger holder Trunnion bore Ø 25 x 25mm *

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Iiodpfx Abswtdzro Ajd Tool holder SK 40 Internal coolant 35 kVA approx. 7550 kg Comprehensive tool package available separately

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Isdpfxexrcnlj Ab Aeid

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report Iiodpfx Aoy H E Akob Aed • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Optional accessory: chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Technical Specification Counter Spindle No Driven Tools No

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 Iisdpfx Asd E Np Eob Aed 30 kW grinding motor Modicon control system Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 100 mm, turning diameter over bed slide: 500 mm, center height: 250 mm, center width: 400 mm, turning length: 2,000 mm, quill travel distance: 230 mm, total length: 3,600 mm, total width: 1,250 mm, total height: 1,400 mm, spindle speed (max.): 1,400 rpm, metric thread steps: 120, overall weight: 3,100 kg, three-jaw chuck diameter: 315 mm, Used traditional parallel lathe Sibimex CU500MT in excellent condition, ideal for mechanical workshops, industrial maintenance, metal fabrication, and precision machining. Isdpfxoym Ut De Ab Aeid Solid, reliable machine, always carefully maintained. Sturdy cast iron frame, smooth slides, and precise mechanics. Perfect for those looking for a ready-to-use solution without investing in a new machine. Key features: * Excellent overall condition * Precise and reliable mechanics * Ready for immediate use * Ideal for machining shafts, flanges, bushings, and single parts * Perfect for small to medium production or maintenance Machine is operational and can be inspected by appointment. No urgent work required. Testing on site available.

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Ijdpfewtg H Rox Ab Aeid

Condition: used, diameter div. number 44x Iedpfx Ajxyzxfeb Aeid tool adaptor SK 40