Pastry machine

VALETTE E GARREAU DST 27 (DN27)

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Nodpeyidvdofx Afweda Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Ndedpfswaiw Ssx Afwoa Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Year of construction: 1995, condition: like new (used), The bucket drainer is the perfect machine for the recovery of 0-4 sand, with low energy consumption and little maintenance. Nedpfju Avrtjx Afwoda - Flow rate: 50 cubic meters/h - Motor 5.5 Kw.

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, We are selling a legendary Kronen GS-10 industrial belt slicer, perfect for fruit and vegetable processing. Equipped with a 4 mm slicing blade, 380 Volt, 5-pin plug. Excellent for continuous slicing of firm-fleshed fruits and vegetables. Unfortunately, it was not suitable for our strawberries, so we are selling it after purchasing it new in 2024 (purchase invoice available). Comes with all safety systems and CE certification. The machine's data plate is not available. Organic farm PODERE COLOMBARA DI GIULIA SERRAO (Imola, Bologna) Ndjdpfsyymprex Afwoa

Condition: like new (used), Year of construction: 2014, operating hours: 715 h, functionality: fully functional, machine/vehicle number: L62500, arm reach: 1,919 mm, total height: 3,200 mm, total width: 4,600 mm, total length: 5,200 mm, input voltage: 400 V, type of cooling: water, We are offering a Yaskawa TIG welding cell from October 2014 in as-new condition, with very few documented operating hours. The unit was used briefly and then decommissioned, as we no longer produce the components for which it was originally acquired. The system features a rotary table with a maximum capacity of 1000 × 1500 mm, enabling the alternate machining of two parts to optimize cycle times and maximize productivity. It is also equipped with a push-wire (wire feeding) system, useful for overlay welding or areas lacking base material. The installed TIG technology is high-performance, designed for applications demanding high-quality and repeatable weld seams. Technical support is available via Roboteco S.p.A. (Yaskawa), offering reliable after-sales service and an international support network. The machine is immediately available and located in Tre Ville (TN), Italy. The asking price includes: - Professional dismantling - Loading onto the buyer’s transport vehicle Ndedpox Exl Nofx Afwja Detailed photos and further technical specifications are available upon request.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 07758, We offer this Tonello 70 L1 ECOFREE 2 industrial washing machine in very good condition, year of manufacture 2018. Brand: Tonello Model: 70 L1 ECOFREE 2 Year of manufacture: 2018 Condition: very good Category ID: 2065 Type ID: 1018 Type: industrial washing machine If you have any questions or require further information, please do not hesitate to send us a message or call us. Ndedeyt Hcwspfx Afwsa

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 720 kg, warranty duration: 12 months, welding current (min.): 800 A, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, The SITEC ITR1200 CN is a tilting rotary table with CNC control, designed for circumferential welding of large components. Thanks to its robust structure, brushless drive, and fully programmable management, it guarantees high precision, reliability, and repeatability of the processing cycles. Key features: Table diameter: 1,000 mm Njdpfxezlih Sj Afwoda Maximum load in the horizontal plane: 1,200 kg Rotation speed: 0.04 – 2 revolutions/min Bending moment: 300 kgm Torque: 150 kgm Hydraulic tilting: 0° – 100° Welding processes: TIG / MIG Brushless motor with permanent magnets and digital control CNC with integrated PLC Touch screen display for programming and cycle management Storage and retrieval of welding programs Setting of overlap, number of tack welding points, and processing parameters Rotating mass 800 A High-rigidity, electro-welded steel structure Advantages: High precision and repeatability of welding Complete control of processing cycles Reduced setup times High-efficiency and low-maintenance brushless drive Ideal for industrial production and heavy-duty machining Applications: Particularly suitable for welding tanks, vessels, flanges, dished ends, large-diameter pipes, and components for the energy, plant engineering, shipbuilding, and metalworking industries. Customization: The machine can be configured with numerous optional features and accessories, including pneumatic torch holders, dedicated supports, and further customizations to adapt to specific production requirements. For more information, photographs, demonstration videos, and available configurations, please do not hesitate to contact us.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, SITEC IPRT600 CNC Roller Posistioner – Capacity 600 kg SITEC IPRT600, a motorized roller positioner with controlled axis, is ideal for rotating and tilting cylindrical parts during manual or automatic welding operations. Main features: Maximum capacity: 600 kg Workpiece diameter: Ø 100 ÷ 600 mm Tilting angle: ±75° Variable rotation speed: 0–1200 mm/min CNC numerical control with integrated PLC Brushless motors for high precision and dynamics Programmable work cycles Automatic positioning and weld overlap management Motorized tailstock with 700 mm stroke Motorized rollers, adjustable in width Rotating mass 800 A High-rigidity, welded steel structure Advantages: High positioning accuracy Maximum programming flexibility Reduced cycle times Remote assistance and network connection Intuitive operator interface Nodpfezlib Ejx Afwoda Applications: Ideal for welding pipes, tanks, pressure vessels and other cylindrical components in the metalworking, plant engineering and energy sectors.