Planing lines

Waco HM200X, SYSTEM HALL

Condition: used, Year of construction: 2013, functionality: fully functional, HTZ 1200 SP EXTREME 15 HORIZONTAL LOG BAND SAW for big logs • production year 2013 • max. log diameter: 1,5 m • 45 kW main motor with frequency converter • automatic, hydraulic blade tensioning • automatic pre-cutter • automatic board guiding device • max. length of logs 12 m • 8 pcs hydraulic clamp + 1 pc support • 1 pc lifting clamp for taper control Fedpfxsx Adlgs Abujpc • 3 pcs log turning device with left-right positioning • set of longitudinal rollers (3 pcs motorised, 1 pc simple) • automatic control • automatic, lifting belt conveyor for boards • dust extraction device • low working hours

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed up to 25 m / min. -Choice of fixed or co-rotating tunnel bars. -By means of deflectors, the hot air streams at the top and in the middle can be adjusted separately. -Bottom air can be switched on separately. Fsdpfx Abjh U A I Reuopc -The machine can be pushed or fixed in place by means of lockable castors.

Condition: ready for operation (used), Tilt destacking for layer separation Stacking lath separator with conveyor belt Fjdpsuzht Tsfx Abujpc Layer transport to the layer buffer Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: Fsdpfsrvh Tmsx Abujpc 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Fsdpohclffefx Abuepc Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: excellent (used), Year of construction: 2007, High speed moulder infeed comprising a freestanding flat magazine for use in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 11kW hydraulic unit (max 150m/min). 15kW hydraulic unit (max 200m/min) possible to offer also. Suitable for 300mm wide feed material. A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Fedpfx Aoggghmobujpc

Condition: good (used), Year of construction: 1996, Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power Fpodpfx Aoh Dwl Debuec six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Condition: excellent (used), Year of construction: 2015, Stravis sawmill line with Jabłoński automatic edger after complete renovation. Condition like new. The line consists of: 1. Log conveyor for 5m logs with a cascade feeder Fpjdpfev Iyhfox Abuoc 2. Caterpillar-chain saw 110 + 90 kW 3. Multi-blade saw (2 x 75 kW) spindle diameter 80mm 4. Roller conveyor l- 6m with a mechanism for stopping the movement of the left prism 5. Crosscut saw from 0.8 m to 5m 6. Base conveyor 7. Roller conveyor l=3.5m 8. Driven roller conveyor 4.5m 9. Driven roller conveyor l=4.0 m with a board dumping mechanism 10. Transverse belt conveyor b=3m, l=5m 11. Transverse belt conveyor with a pick-up b=2m, l=5m 12. Longitudinal belt conveyor b=0.4m, l=5m 13. Automatic edger Jabłoński 14. Gooseneck Jabłoński 15. Cross feeder with a scanner measuring the width of the board 16. Centering for the edger 17 17. Edge separator 18. Crosscutter from 0.8 m to 3.0 m 19. Gooseneck 20. Automatic stacker Jabłoński 21. Non-regenerated crosscutter Jabłoński 22. Bruks chipper with control (you need to make a belt or vibrating gutter) Assembly and start-up at the customer's premises is possible. Possibility of sending videos of the working machine before renovation. Possibility of setting the line in a turn or along the length. Optionally, construction of a base for the line. OPPORTUNITY

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Fpodstuyr Ijpfx Abuec Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: ready for operation (used), Slab recovery line with below machines: One 2-blade board edger One single blade horisontal resaw Fpodpfx Abogwqk Souec Conveyors system between the machines included.