Milling machine

WANDERER KFV2

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Kedpeguk S Sefx Ah Uenf Machine weight Approx 40T. Build year 1993

Condition: repair required (used), Machine number: 1464 TyP / Model: FUW 250/IV travel x-y-z: 400 - 220 - 400 mm table: 630 x 350 mm table clamping surface: 700 x 300 mm speed range: 45 to 2.240 rpm spindle mounting: SK 40 feed range longitudinal: 6,3 to 1.250 mm/min feed range cross: 6,3 to 1.250 mm/min Connection: 7.4 kW accessories/equipment: vertical head Condition: 2 controllers defective Note: machine repair EUR 2.000 weight: 1,45 t dimensions: 1.500 x 1.600 x 1.800 mm Kodsd Hl Stopfx Ah Ujnf

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm Knjdpfopbbc Hsx Ah Uef - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: used, Year of construction: 2007, Travel range: X=4400 Y=2195 Z=440 mm Working area in X=3650 mm Y=1560 mm Clearance: 330 mm Electrospindle SCM Power 2000, high speed milling spindle with 13 kW power Rotary axis Vector (C-axis) Cleaning blower for tool on the milling unit Tool holder HSK 63 F Speed range 600 - 24,000 rpm, stepless via inverter Motor power 8.5 kW Tool holders: 6 pcs Tool changer: Rapid 12 (12 positions) Vacuum pump 250 m³/h / 5.5 kW Max. vacuum: 0.9 bar Reference stop at the sides of the table Drilling unit with 11 spindles (7 vertical / 4 horizontal) Control: NUM Series 1000 User interface: XILOG Plus PC Office hardware WINDOWS XP Professional Total connected load: max. 27.5 kW Weight: 5200 kg Storage location: Nattheim Ksdjw Dcb Sopfx Ah Usnf

Condition: new, Year of construction: 2026, functionality: fully functional, center height: 250 mm, workpiece weight (max.): 750 kg, grinding length: 2,000 mm, grinding wheel diameter: 500 mm, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, grinding diameter: 320,400,500 mm, quill travel distance: 50 mm, workpiece weight between centers: 500 g, distance between centers: 2,200 mm, workpiece diameter between centers: 500 mm, spindle speed (max.): 560 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 2,500 mm, grinding spindle speed: 1,400 rpm, overall weight: 8,000 kg, warranty duration: 24 months, workpiece spindle speed (max.): 560 rpm, Equipment: rotational speed infinitely variable, Main technical data : Swing diameter mm 320,400,500 Distance between centres mm 1000,1500,2000,3000 Standard wheel size (diameter x width x bore) mm 500 x 200 x80 Maximum wheel width mm 100 Peripheral wheel speed m/sec 45 Wheelhead swivel (°) +10/- 30 Workhead swivel (°) 90 Tabel swivel (°) 0 Workhead spindle speed, infinitely variable RPM 2-500 Workhead sleeve taper bore Morse 5 Tailstock sleeve taper bore Morse 5 Minimum programmable increment : in axis X /related to diameter./ (grinding wheelhead) mm 0,001 Ksdpfxspy A Iuj Ah Ujnf in axis Z (table) mm 0,005 Maximum weight of workpiece Workhead motor kW 2.5 Wheelhead motor kW 11 Total power demand of machine kW 45 - between centres kg 500 Weight of machine with standard accessories kg approx 10000 Dimensions of machine approx. mm 8 000x 2 980 x 2 200

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. Kedpfxeiyyndj Ah Uonf We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: good (used), Year of construction: 2005, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, In good technical condition. Year of modernization: 2005. Main electric motor power: 37 kW Installed machine power: 50 kVA Maximum machine length and width (including control cabinets): 7800 x 7200 mm Maximum machine height: 4900 mm Assembled floor space: 50 square meters Required installation height: 5800 mm Maximum workpiece weight: 12000 kg Work spindle diameter: 130 mm Spindle taper: ISO 50 Work spindle throat: 800 mm Work spindle speed range: 5 to 1800 rpm Distance of spindle axis from table clamping surface (Y): 70 mm Table clamping surface: 2500 x 1800 mm Kodpfx Ahswc Sm Ij Uonf

Year of construction: 2014, condition: good (used), SYSTEM 2 - 2014 Knedpfsppv Rxex Ah Usf Serial number: 1006-0055 Model: S12 · Serial 1006-0055 - Year 2014 – Working hours 58366 · Chuck type ISO50/110 · 1st grinding wheel axis 7,5/12,5kW right-handed Ø73mm external grinding · 2nd grinding wheel axis Ø100 60000-1/min M16/17 7,5kW internal grinding Serial number: 1040-0134 Model: S22 · Serial 1040-0134 - Year 2014 - Working hours 58810 · Chuck type CM4/70, · Grinding wheel axis 7,5/12,5kW right-handed Ø73mm external grinding

Condition: used, Year of construction: 2001, x-travel 2050 mm y-travel 1100 mm z-travel 800 mm Knjdsrw Dknspfx Ah Uof Control Fanuc 18iM Super Cap II turning speeds 60-6000 U/min tool magazin: 60 tool taper BT50 total power requirement 26 kW weight of the machine ca. 23,6 t required space 6,3 x 3,3 x 3,8 m

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0506, Control: FANUC 18i-TB Knedpfx Ahjxgnvdo Uof Max. bar diameter: 32 mm Max. spindle head stroke: 310 mm Spindle speed: 350 - 7,000 rpm Max. bar diameter on sub-spindle: 32 mm Max. sub-spindle speed: 350 - 7,000 rpm Number of usable tools: 21 Turning tools in multi-tool holder: 6 Driven tools for cross machining: 3 Front drilling tools: 4 Rear drilling tools: 4 Back machining: 4 Driven tool speed: 5,000 rpm Bar feeder: FMB turbo 3-36