Bench Drilling Machine

WEBO Gradua 23

Condition: used, number of spindles 4 bore capacity in steel (diameter) 23 mm bore stroke 150 mm total power requirement kW weight of the machine ca. t Gtodpfst Hw U Nsx Aadeu dimensions of the machine ca. m

Condition: new, Working width 3500 mm Gsdpfed Rzc Rsx Aadetu Working height 2300 mm Number of cylinders 4 St.

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Gtsdpfx Aaeg Npiwedou Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg.

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm throat: 100 mm spindle turning speed range: 6300/9000 rpm Gjdpfxofnbgqo Aadstu engine: 380 V, 0,18 kW space needed: 470 x 250 x 520 mm weight: 39 kg

Condition: new, Optimum OPTIdrill DH 40G Universal column gear drilling machine 3034356 TECHNICAL DATA Dimensions and weights Length (product) approx. 590mm Width/depth (product) approx. 700mm Height (product) approx. 2050mm Weight (net) approx. 320kg Drilling capacity Drilling capacity steel (S235JR) 32mm Continuous drilling capacity steel (S235JR) 25mm Tapping capacity steel (S235JR) M 16 Drilling table Drilling table work surface length 500mm Drilling table work surface width 460mm Drilling table T-slot size 14mm Load capacity drilling table 50kg Speed range Speed range 95 - 3200min¯¹ Number of speed ranges 2 x 6 steps Electrical data Gtjdpfjt N Ri Eex Aadsu Drive motor power 1.1 / 1.5kW Supply voltage 400V Mains frequency 50Hz Spindle Quill stroke 120mm Spindle holder MK 4 throat 280mm Drill head rotation 45° Drill head inclination 360 Manual quill feed Drill head height adjustment 265mm SCOPE OF DELIVERY Gear rim drill chuck 1-13 mm/B16 Tapered arbor for drill chuck MK4/B16 Tightening rod M 16 Adapter MK4-MK3 Operating tool

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- NEW for the Holz-Handwerk 2026 trade fair in Nuremberg: Now also with semi-automatic positioning of the vertical press cylinders 1, 2, and 3 via enabling switch, including ON/OFF selector switch for beam 2 With automatic pressing cycle + manual control Godpfowg Hr Tsx Aadotu for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article Shut-off valve on the 3rd vertical cylinder Article Shut-off valve on the upper horizontal cylinder Article Shut-off valve on the lower horizontal cylinder Article x slanted window control for ...

Condition: used, Year of construction: 1994, Frame press Schafberger & Sprödhuber Type Super 4 Kw Gtjdpfx Aaeilurnedsu 3 m x 6 m

Condition: new, ALZMETALL Alztronic 16 table drilling machine Condition: new Availability: Immediately from the Offenburg warehouse Drilling capacity steel E335 (St 60) 16 mm Thread cutting steel E335 (St 60) M 12 Drill chuck taper MK 2 Spindle stroke 80 mm Thrust 190 mm Gtodpsxd Tugefx Aadju Column diameter 65 mm Manual feed Drill head height adjustment via handwheel Net weight approx. 83 kg Infinitely variable speed adjustment Motor 0.54 kW Spindle speed rpm 100-2000 Optional special equipment: - Digital drilling depth indicator - Machine light Optional accessories: - Röhm Supra drill chuck 1-13mm or 3-16mm - Alzmetall under-table

Condition: ready for operation (used), A column drilling machine Alzmetall with a rotating round table is available. Drilling capacity steel/cast iron: 45mm/50mm, reach: 345mm, tool holder: MK4, speed: 720rpm. Machine dimensions X/Y/Z: approx. 1100mm/600mm/2000mm, weight: approx. 650kg. An on-site inspection is possible. Godpsx Hz N Tofx Aadotu

Condition: excellent (used), USED MACHINE - V380/50 - "CE" Code: CAL-052 _ _ _ Working width: 1100 mm 1st group: steel roller 2nd group: rubber roller 3rd combined group: roller/pad Gsdpoxp Ecyjfx Aadjtu Motor power: 2 x 15 kW