4 side moulder

Weinig Hydromat 25 R

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm 8 heads Dodpfx Absx Sw T Soujun 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Condition: used, Working width: 230 mm Working height: 160 mm Spindle 1: Bottom / 7.5 kW Spindle 2: Right / 7.5 kW Spindle 3: Left / 11 kW Spindle 4: Bottom / 11 kW Spindle 5: Top / 15 kW Spindle diameter: 50 mm Number of spindles: 5 Duedpfxormvhfe Abusn Weinig Hydromat 2000 planing and profiling machine for four-sided planing and profiling of timber with groove bed, without soundproof cabin.

Condition: excellent (used), Year of construction: 1979, working width 250mm working height 140mm 8 heads 3 toothened rolls in the table before first head heads set: bottom/right/left/right/left/top/top/bottom Dujdpfeww H Rwox Abuon variable regulated feeder to 100m/min spindles diameter 50mm two side bearings of spindles feeder with cardan spindles speed 6000 rpm pneumatic pressure of feeding rolls two side heads regulation two axes heads regulation iron cast body

Condition: excellent (used), Planing width 250 mm Planing height 120 mm 1. lower spindle 2. right spindle 3. left spindle 4. right spindle 5. upper spindle 6. lower spindle 7. lower spindle 8. Universal spindle 360* - Hydraulic feed 6-60 m/min. - 10x driven table rollers Dusdowlk E Ijpfx Abuen - Spindle diameter 50 mm

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: Dujdsmgc I Njpfx Abujn - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year 1981 with walk-in soundproof cabin KASCHWIG - FAST NEW from year 2017 - Short infeed table with heavy 6-roller infeed 1st spindle bottom 11.0 KW 2nd spindle right 11.0 KW 3. spindle left 11.0 KW 4th spindle top 15.0 KW 5. spindle bottom 11.0 KW Dusdotkt Tpspfx Abuen 6. spindle bottom 11.0 KW - Hydraulic feed 6-60 m/min. - Feed motor 22.0 KW - 4x driven table rollers - Spindle diameter 50 mm - Automatic table lubrication - Spindle 1 + 4 + 5 + 6 with counter bearing - Spindle 1 + 4 with straight jointer - Feed rollers 170 mm - approx. 10 hydraulic planing heads - Suction box above the machine

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Duedpfx Ajt R T Hcebusn Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, Working width 3500 mm Duedod Rzc Repfx Abujn Working height 2300 mm Number of cylinders 4 St.

Condition: good (used), Code: 0456 Brand: MEBER - ITALY Model: BEST 800 - CE Standard Industrial band saw with feeder for wood, semi-finished products, window frames , laminated timber, beams, boards, sawmills, carpentry and various - CE Standard Features: Sturdy construction Ergonomic position of the control panel board Integral blade guard Scrapers with brass blade for good cleaning of the flywheels Flywheel diameter mm 800 Table dimensions mm 1300 x 800 Cutting capacity: height x width mm 380 x 750 Duodpfx Aown H Iwsbusn Blade width mm 80 Flywheel revolutions min 700 Blade length mm 5090 Motor power Hp 20 Feeder R1 : Fitted with a toothed drive roller and a support fence with idle rollers which can be positioned manually - Roller position is adjustable - Feed speed variator Roller height mm 235 Roller diameter mm 215 Max roller-blade distance mm 290 Max distance fence-blade mm 200 Fence dimensions: mm 490 x 290 x 260 Machine dimensions with mounted resaw mm 1200 x 1900 x 2500 h Total weight kg 1580

Condition: good (used), Sorting Car / Sorting Crane Baljer & Zembrod Crane ASX1 Inner track width: 2.5 meters With cross-cut saw (has not been used for a long time) With cutting rack With tracks Dodov I A Ihspfx Abujun With cable (1 year old) Immediately available Location: Austria, near Villach