Precision setting gauge Weinig

Weinig

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Nsdpfspl D Hxex Ah Ujdf Tyop GA 250

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Very well-maintained compact drying chamber MÜHLBÖCK type QLSF-2x1.2-3x1.2-13 / year of manufacture 2004. Complete system including control unit. Heat requirement: 330 kW. The unit is still in operation! Full transport by truck is possible. Only the counterweight needs to be dismantled. The matching heating system can also be supplied upon request. Dismantling/transport by the buyer is possible. Construction dimensions can be found in the attached drawing. Njdoxt Hwaepfx Ah Uedf

Condition: excellent (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, cutting height (max.): 160 mm, height adjustment type: hydraulic, Technical Description – Double Edger PAUL KME-750-L (Year of Manufacture 2012) The machine offered is a double edger of the type PAUL KMEZ-750-L, year of manufacture 2012. The machine is in good condition and ready for immediate use. It is ideally suited for precise edging of wood in industrial applications. Technical Data: • Machine No.: 12242770 • Year of manufacture: 2012 • Net weight: approx. 1,500 kg Drive & Electrical: • Connected load: 38 kW • Supply voltage: 400 V / 50 Hz Njdpfx Aexpua Ueh Ujdf • Rated current: 71 A • Circuit protection: 80 A • Control voltage: 24 V DC Saw technology: • Saw blade speed (min/max): 250 / 380 rpm • Bore diameter: 75 mm • Saw motor speed: 3,200 rpm Hydraulics & Pneumatics: • Hydraulic pressure: 60 bar • Pneumatic pressure: 6 bar Equipment: • Infeed rollers for easy material feeding • Integrated alignment scanners for automatic positioning • Batten sleeve • Waste block separator • Outfeed table for orderly material discharge This high-quality machine from PAUL is designed for continuous use in industrial wood processing and is equipped with practical additional features that enable efficient workflow.

Condition: good (used), Edger line / automatic edger / double edger with automatic measurement and adjustment EWD Esterer Type: DK90 TL 1000 Year of construction: 1994 Maximum passage width: 1000 mm Nodpevg Ecfsfx Ah Usdf Maximum cutting height: 120 mm 2-stile variable Measurement Combimes with S-conveyor with cross-cut saw with Esterer ARS TR infeed with 2-lamellar splinter separator new saw shaft, new bearings and new chains 3 years ago. Incl: External infeed for boards to DK90 with tilt destacking with cross conveyor

Condition: good (used), Year of construction: 1995, functionality: fully functional, 1 used Cambio 70 debarking machine with Mayrhofer mechanization, consisting of: Mayrhofer roundwood infeed system with 4 strands, approx. 6 m long and 6 m wide; singling stage and feeder onto the block conveyor; Cambio 70 debarking machine; length measurement; 4 discharge bunkers; overall line length 45 m; scraper conveyor for bark removal. Inspection in operation is possible at any time. Nedpfx Ahexvpq Io Ujdf

Condition: good (used), functionality: fully functional, Inclined conveyor for round timber and logs with 5 chain strands. Conveyor length approx. 2.70 m. Width approx. 6.15 m. Chain spacing 1.40 - 1.0 - 1.60 - 2.0 m Increasing from 0.70 to 1.90 m. Chains with flighting. Shaft 70 mm. Driven by a 3.7 kW geared brake motor. Njdjwcp Snspfx Ah Uodf Can be demonstrated.

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. Njdpfx Ahjv Hm Nme Usdf • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw. Nodpfx Asxtwvtjh Uodf Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 - 50 m/min. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: used, Year of construction: 1999, with spiked chains feed gearbox newly mounted in 2025 incl. approx. 15 carbide-tipped blades 5 pressure rollers used, in good condition Manufacturer: Raimann Type: KS 310 Year of manufacture: 1999 Machine no.: 26085 CE type-certified GS wood dust tested Motor: 30 kW Chain width: 340 mm Max. cutting width: approx. 650 mm Cutting height: approx. 120 / 105 mm with roller Kerf: approx. 650 mm Feed speed max.: 8 - 35 m/min / 1.5 kW Electrically adjustable Saw blade diameter min. 250 mm - max. 360 mm / 80 mm bore Shaft diameter: 65 mm, 3900 rpm Min. workpiece length: 450 mm with roller Spiked chains Extraction port: D 180 mm Space requirement approx. 2100 mm x 1400 mm x 1600 mm Weight approx. 2200 kg Nominal current 50/41 A max Njdpfx Aoxuv Rloh Uodf Located at 97447 Gerolzhofen, free loaded, unpacked Sold as is, as inspected without warranty or guarantee

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-preserved HIT curved conveyor / for board or workpiece separation, heavy-duty design. Conveyor height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with 6x2 slat carriers. Integrated flush roller conveyor. Transfer cross conveyor, height-adjustable. Slab discharge flap. Driven by SEW geared motor with brake. Curved conveyor split and bolted in the middle for transport. Ideal upstream of a twin edger or stacking system. Nsdpjxl Ediofx Ah Usdf