Window production centre

WEINIG Unicontrol 10 NC

Condition: reconditioned (used), Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Giodpfx Aoxpi Duonlsu Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Gjdpfx Ast Uduxenlsiu

Condition: used, Year of construction: 2017, operating hours: 1,717 h, total height: 2,700 mm, total length: 40,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 20.500 kg Price: On request The blade unit has a flange connection so fixed blade ( max 1000mm diam ) with 55kw at 4000rpm 5axis unit 12kw is a milling group with toolchanger C1: 540° B1: 250° C2: 540° B2: 90° Installed dimensions: 19300x7100xH4400mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 904B0018 - Operating hours: 1717 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 Gsdjwf Hw Hepfx Anleiu - - Main motor power [kW]: 55 - Type milling table: Flat table - Tool clamping system: - Material clamp system: Pneumatic - Saw unit present: Yes - Tool changer positions [pcs.]: 9 - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Elmo Rietschle - └ Type: C-VLR 401 - └ Year of manufacture: 2017 - └ Main motor power [kW]: 9 - └ Capacity [m³/h]: 400 - └ Vacuum pressure [bar]: 200 - Tools included: Yes - CNC options: Offcut conveyor - CNC documentation available: USB stick, User keys/licenses - Table length [mm]: 14400 - Table width [mm]: 3500 - Working range X [mm]: 15000 - Working range Y [mm]: 4500 - Z-axis working range [mm]: 480 - X-axis maximum stroke [mm]: 5000 - Y-axis maximum stroke [mm]: 15870 - Z-axis maximum stroke [mm]: 1000 - Voltage [V]: 400 - Current consumption [A]: 130 - Fuse [A]: 180 - Power [kW]: 65.0 - Installed length [mm]: 19300 - Installed width [mm]: 7100 - Installed height [mm]: 4400 - Transport dimensions: 40000mm x 2400mm x 2700mm (l x w x h) - Transport weight [kg]: 20500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, Weinig production line CONTUREX C 125, year of manufacture 2018 Godpfxjy Emrke Anljiu

Condition: used, mileage: 164,135 km, power: 62 kW (84.30 HP), first registration: 07/2012, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, next inspection (TÜV): 09/2024, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2012, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI with EURO 5 emissions standard and truck registration is a used commercial vehicle that stands out with its practical configuration. Powered by a 2.0 TDI engine delivering 62 kW (84 hp), it provides sufficient performance for a variety of transport tasks. The vehicle was first registered in July 2012 and has a valid main inspection (HU) through September 2024. It has a mileage of 164,135 km and comes in the distinctive color Ginstergelb (Broom Yellow). Equipped with a manual transmission, the T5 features five gears and front-wheel drive. The transporter is fitted with two sliding doors, on both the left and right sides, allowing for easy access and efficient loading and unloading. Dimensions are 1,970 mm in height, 1,904 mm in width, and 4,892 mm in length, with a wheelbase of 3,000 mm. The gross vehicle weight is up to 2,800 kg. Godeydh U Aspfx Anljiu The T5 Transporter offers a combined fuel consumption of 7.2 l/100 km and has CO2 emissions of 190 g/km. With a level 4 (green) environmental badge, it is well-suited for urban driving. The vehicle is available for immediate inspection and is exclusively intended for commercial buyers or for export. Registration service and delivery within Germany are available for an additional fee. Sale only to trade customers (agriculture, self-employed professionals, small and large businesses) or for export. Errors and prior sale excepted.

Condition: ready for operation (used), Year of construction: 1975, Column drilling machine Make CORDIA Type: S-18 Year.ca.1975 Giedpfx Ashtri Eenlju drilling in steel max.18mm spindle mounting : MK2 spindle speed : 90 -1450 rpm spindle stroke : 120 mm table:350 mm X 400 mm clamping surface;270 mm X 320 mm Space requirement : width 420mm depth 650mm height:2000 mm Weight:ca.350 Kg. Machine is ready for use .

Condition: excellent (used), WEINIG Window Production Line, Unicontrol 6, S/N 035-823, year 1997 Crosscut saw, pneumatically indexed (3 kW) with laser alignment light Slotting spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Parallel spindle 50 x 120 mm – 7.5 kW motor Longitudinal profiling spindle 50 x 320 mm for 4 tools at 80 mm each – 11 kW motor Fitting spindle, pneumatically indexed, 40 x 160 mm – 3 kW motor Saw/grooving spindle, horizontal top, pneumatically indexed – 3 kW motor Feed speed adjustable from 6–12 m/min – 1.1 kW motor Screen control for 99 window types Support bar for muntin production, pneumatically indexed Studio window setup with digital angle display Length stop up to approx. 3,500 mm Corner jointing unit with support rail Return conveyor to operator side Machine complete with operating manuals, circuit diagrams, spare parts lists LEITZ tool set, IV-78 Giedpfxoy Dud Ee Anlsu THE SYSTEM IS IN VERY GOOD TECHNICAL AND COSMETIC CONDITION Delivery: EXW Delivery time: Prompt by arrangement Inspection: By appointment Payment: Upon notification that the goods are ready for dispatch Subject to prior sale and errors excepted.

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig PC-Nexus Weinig Unicontrol 11 Window System with Extensive Tooling ----- Optionally available (at additional cost): - Weinig Univar 6 Rebating Machine (Price upon request!) - Götzinger PowerDrill Drilling and Milling Center for Windows and Doors (Price upon request) Manufacturer's Technical Description: ----- Item 1: Weinig Unicontrol 11 Window System ----- Includes existing tooling sets: - IV 67 (Wood and Wood-Aluminum) - IV 77 (Wood and Wood-Aluminum) - IV 90 (Wood) Cross-cut Saw ----- With laser alignment light; motor power: 3 kW; spindle diameter: 40 mm; electronically variable spindle speed with brake: 3,000–6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal Bottom Rounding Unit ----- Motor with brake: 1.5 kW; Spindle diameter: 20 mm; Clamping length: 25 mm Gisdpfx Aey T R Tuonlsu Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Axial adjustment travel: mechanically coupled with cut-off saw Radial adjustment travel: pneumatically controlled Tenoning and Slotting Spindle ----- With hydraulically clamped outboard bearing Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,800 rpm Max. tool cutting circle: 400 mm Tool clamping length: 640 mm Axial adjustment travel: NC axis Home position below table: 5–10 mm Radial adjustment travel: fixed 1st Profiling Spindle (Climb and Conventional Milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Min. tool cutting circle: 140 mm; Max. tool cutting circle: 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position below table: 5–10 mm 2 feed rollers opposite the spindle; axial adjustment pneumatically controlled (8 positions) Horizontal Top Profiling Unit ----- Motor power with brake: 3.7 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 9,000 rpm Max. tool cutting circle: 130 mm Adjustment: pneumatic, to 8 positions (axial and...) radial 2. Profile Spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool cutting circle: min. 140 mm, max. 232 mm Tool clamping length: 400 mm (with outboard bearing) Axial adjustment travel: 350 mm (NC axis) Radial adjustment travel: NC axis Home position (below table): 5–10 mm Indexed guide fence with muntin support strip 2 feed rollers (opposite the spindle); axially pneumatically controlled (8 positions) Vertical Profile Milling Unit (Right-hand side, at machine end) ----- Motor power (with brake): 3.7 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Tool cutting circle: min. 112 mm, max. 210 mm Adjustment: Pneumatic (8 positions—axial a...

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 113253, functionality: fully functional, overall weight: 14,000 kg, table length: 4,500 mm, working width: 260 mm, working height: 150 mm, working length: 4,500 mm, The submission of a bid obligates the buyer to dismantle the machine between April 1, 2026, and April 3, 2026. TECHNICAL DETAILS Working area X-axis: 4,500 mm Working area Y-axis: 260 mm Working area Z-axis: 150 mm Table length: 4,500 mm Gjdpfjyh Uxyjx Anljiu Number of milling spindles: 1 unit Tool changer positions: 24 units MACHINE DETAILS Power consumption: 63 A Fusing: 80 A Power output: 32.0 kW Voltage: 400 V Total height: 2,900 mm Weight: 14,000 kg EQUIPMENT Electrical diagrams (NL, DE, hardcopy) Spare parts list (NL, DE, hardcopy) User manual (NL, DE, hardcopy) Boring tool Note: The machine is sold without tools.