2009 WEINIG VARIOMAT

WEINIG VARIOMAT

Condition: used, Year of construction: 2013, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2500 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2-12 m/min. weight of the machine ca. 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine ----- Brief Summary: ----- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturer's Description: ----- Working width: 20 – 230 mm Bljdpfx Ajy Spvfemioh Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93 – 232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum moulding depth: 45 mm Axial adjustment range: 30 mm Insert segment incl. additional fence lip: 125 mm Insert segment incl. additional fence lip: 150 mm 3rd Spindle: Vertical Left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93 – 232 mm Maximum moulding depth: 45 mm Minimum moulding depth at 200 mm tool cutting circle: 20 mm Axial adjustment range below table: 30 mm Insert segment: 125 mm Insert segment: 150 mm 4th Spindle: Horizontal Top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 30 mm Minimum rebate depth (for tool cutting circle up to 200 mm): 20 mm Axial adjustment travel: 30 mm 5. Horizontal Bottom Spindle ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum rebate depth: 15 mm Axial adjustment travel: 10 mm Table plates with wooden inserts for the bottom spindle Additional outfeed plate above the bottom spindle for wooden inserts Feed System ----- Frequency-controlled feed: 1.1 kW, infinitely variable (2–12 m/min) Double-pendulum roller opposite the left spindle Axial adjustment travel of feed rollers opposite the left spindle: 35 mm Durofer-coated spiked feed rollers Pneumatic pressure for feed rollers (incl. water separator) Cycle-controlled jointing to support manual jointing. The infeed roller is released once the second feed roller has engaged the workpiece. After the workpiece clears the second feed roller, the infeed roller returns to its starting position for the next workpiece. Additional Features: ----- MemorPLUS Control System Width and height adjustment via controls (Spindles 3 and 4: radial CNC-axis controlled) ----- Price for the above-mentioned machine available upon request! ----- OPTIONAL ADD-ON (at extra cost) — Stähle-Hess Saturn #7008: Machine previously used in conjunction with the Stähle-Hess Saturn Duo Single-Piece Wood Sanding Machi...

Condition: excellent (used), 5-axis Year of production: 2018 Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump Blsdpfsun Rqgjx Amioh HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: used, Year of construction: 2009, Colour: Grey Fourside moulder Weinig Variomat Year of construction 2009 Serial number: 113680 400v, 32kW 64Amp. Min-max working width 20-230mm Min-max working height 8-120mm Max tool diameter vertical spindle 232mm Max tool horizontal spindle (Not on the first) 200mm Input table length 1950mmFeed speed 6-12 m/min Spindle diameter 40mmSpindle speed 6000 U/min 1st spindle, bottom: 5.5kW 2nd & 3rd spindle, left & right: 7.5kW 4th spindle, top: 11kW 5th spindle bottom: 5.5kW Please note: 5th spindle does not work Dimensions: 4000x1400xH1350mm weight 2500kg - Details: - └ Description: Problem with 5th-spindle - Year: 2009 - Documentation available: No Bledpfx Amswnhh Eoieh - CE marking present: Yes - CE certificate present: No - Serial number: 113680 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 1,1 kW Feed speed stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ----- Machine will be cleaned and functionally tested before delivery ! Technical manufacturer's description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter 40 mm mm Speed ??electronically adjustable 3000 - 6000 rpm (for 11 kW/15 HP) Tool cutting radius for longitudinal machining 93-232 mm Minimum tool diameter at stop plane: 93 mm Maximum tool diameter behind stop plane: 180 mm Maximum throat depth 45 mm Axially adjustable travel 30 mm Insertion segment, including additional stop lip 125 mm Insertion segment, including additional stop lip 150 mm 3rd vertical spindle, left POWERLOCK/HSK ----- Shared motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool cutting radius for longitudinal machining 93-232 mm Maximum throat depth 45 mm Minimum throat depth with tool cutting radius 200 mm: 20 mm Axially adjustable travel under table 30 mm Insertion segment 125 mm Insertion segment 150 mm 4th spindle, horizontal, top ----- Motor with brake: 5.5 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 30 mm Minimum chamfering depth with a tool cutting radius of 200 mm: 20 mm Axially adjustable range 30 mm Glazing bead removal after the upper spindle 5th spindle, second, horizontal, bottom ----- Bedowugpbspfx Amijlh Motor with brake: 4 kW Diameter 40 mm Speed ??6000 rpm Tool cutting radius 125-200 mm Maximum chamfering depth 15 mm Axially adjustable range 10 mm Machine operation ----- Both axes of all spindles - with the exception of the first lower spindle - are equipped with mechanical digital displays. Central radial adjustment with mechanical digital display of the feed rate along with the pressure in front of the upper spindle. The pressure after the upper spindle can be adjusted separately. Memory function ----- For saving the setting values ??of profiles Tool holder axes and pressure elements before and after the upper tool holder with electronic dual displays: Function: -Saving the setting values ??of the finished profile at the touch of a button under a profile number - When the profile number is selected again, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure elements, the displays are aligned - 99 memory locations 3 axial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function. For spindles 2, 3, an...

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Bedpfxofhb Tks Amiolh

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. Bedpexghngefx Amielh When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Ultimax, total height: 2,800 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 610 mm, table length: 1,270 mm, spindle motor power: 18,000 W, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, 3 axes Tool holder SK 40 Internal coolant Blsdpfx Amswtdzroieh 35 kVA approx. 7550 kg Comprehensive tool package available separately

Condition: new, Year of construction: 2026, functionality: fully functional, Ticab Printing System TPS is an innovative cantilever equipment. It allows feeding huge items beneath the print head. The print head can be adjusted up to 30 cm above the conveyor belt to feed folded cardboard boxes or other huge items. High quality Hewlett Packard HP pigment ink provides resistance to the fading, scratches and water after the image dries. Call us to get a beneficial commercial offer. Specifications:  Print area width: up to 29.7cm (11.7 in)  Print area length: from 2.54 cm (1 inch) to 91.44 cm (36 inch)  Workpiece movement speed: up to 45.72 cm (18 in) per second  Printing speed: up to 50--70 copies\min A4, up to 16 copies\min A3  Print resolution: 1200x1200dpi  Number of inkjet nozzles: 59136 (14 printing zones of 4224 nozzles each)  Colors: CMYK (Cyan, Magenta, Yellow, Black)  Ink type: water-based pigment ink  Information connection: Ethernet 10/100/1000 Base-T network port  Operating system: Windows (recommended Windows10) Bsdpfx Aju Ibhwemislh  Hewlett Packard HP driver  Trusted by professionals in 55 countries worldwide!

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Bedpfx Amotvau Asiolh Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them. Blodpfox Sx R Sex Amieh