Panel sizing circular saws

WINTER FS315-2600

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, turning diameter over cross slide: 630 mm, spindle bore: 320 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 930 mm, turning length: 3,000 mm, Lathe in very good technical condition, has seen very little use and was not used for machining pipes. The Poręba TPL 90/3m lathe (also listed in market nomenclature as a variant of the TPK 90 series) is a textbook example of an Oil Country Lathe / Hollow Spindle Lathe. This model fulfills all the specific criteria for machines intended for the Oil & Gas sector: • Massive spindle bore (Big Bore): This version features a spindle bore with a diameter of 320 mm (approx. 12.5 inches), allowing for easy insertion of thick-walled drill and casing pipes. • Dual chucking system: The headstock is designed for mounting two independent lathe chucks (front and rear, typically 28 inches in diameter), ensuring the pipe is clamped and stabilized at both ends of the spindle. • Optimal working dimensions: The 3m designation defines a turning length between centers of 3000 mm, which, combined with a swing over bed of 930 mm (hence the "90" in the name), allows for machining heavy-duty pipeline components. • Exceptional rigidity: FUM POREBA factory machines are renowned for their monolithic, very wide and heavy cast iron beds, which effectively dampen the immense vibrations generated during taper thread cutting. In international used machinery catalogues, this specific Poręba model is directly classified under the Oil Field Lathes category. TECHNICAL SPECIFICATIONS: Geometric parameters and machining ranges • Swing over bed: 930 mm / 36.6 in • Swing over cross slide: 630 mm / 24.8 in • Swing in gap: 1200 mm / 47.2 in • Maximum turning length between centers: 3000 mm / 120 in • Bed width: 585 mm / 23.0 in Headstock • Spindle bore diameter (Hollow Spindle): 320 mm / 12.6 in (in US nomenclature classified as a 12.5" version) • Spindle speed range: 5 – 250 rpm, or modified versions up to 710 rpm • Number of spindle speed steps: 18 Feed and thread cutting system • Longitudinal feed range: 0.1 – 12.8 mm/rev / 0.004 – 0.504 in/rev • Cross feed range: 0.05 – 6.4 mm/rev / 0.002 – 0.252 in/rev • Types of threads cut: Metric, Inch (Whitworth), Module, Diametral Pitch (DP) Cedoy Sf Azspfx Al Ashc Tailstock • Tailstock quill diameter: 130 mm / 5.1 in • Tailstock quill travel: 300 mm / 11.8 in • Internal taper of quill: Morse No. 6 (MT6) Drive and dimensions • Main motor power: 22 kW / 29.5 HP • Overall length: approx. 5500 mm / 216.5 in • Overall width: approx. 1750 mm / 68.9 in • Overall height: approx. 1500 mm / 59.0 in • Total weight: approx. 8000 kg / 17,630 lbs

Condition: good (used), Year of construction: 1969, Wood band saw, band saw machine, band saw, vertical band saw -Manufacturer: Hema Paul and Gotthilf Heermann, vertical band saw -Type: unfortunately without type designation -Drive: 4 kW -Cutting width: max.785 mm Cedpfjh N Thwjx Al Aehc -Cutting height: max.475 mm -Saw band: length 5600 mm -Work table: pivoting -Drive motor with brake -Dimensions: 1600/1020/H2430 mm -Total weight: 794 kg

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Codpfx Asfcw Apsl Aehc Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Codpfeuiwqhjx Al Ashc Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Year of construction: 1996, Woodworking machine, circular saw VEMA TKS LBM, year of manufacture 1996, with milling and drilling attachment. Data for milling and drilling attachment: Speed: 3,000 rpm, table size: 570 x 300 mm, drilling depth: 150 mm, drilling length: 210 mm, height adjustment: 170 mm, two-jaw chuck: up to 20 mm. Data for saw: Speed 3000-6000 rpm, blade up to 450 mm, cutting height up to 155 mm, bevel cut 0°-45°, table dimensions 1260x1100mm, width can be extended with a fence, length 2200mm, extra table 750x950mm. Csdpfx Alshvaphs Ashc

Condition: used, Technical details: pressure: 25 t Csdpfx Asvc Awxjl Ajhc stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Csdpexzp Rlsfx Al Ajhc Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: used, 3.7 kW motor Table length 260 cm Working width 100 cm Chjdpfxsulg Szj Al Aoc With a cutter

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Cjdoxgic Ejpfx Al Aohc Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: new, Year of construction: 2025, functionality: fully functional, SCHORR Wood Splitter 30t HS-30PE PRO With a splitting force of 30 tons, the SCHORR HS-30PE handles even the toughest wood and large logs with ease. Its heavy-duty design (own weight 390 kg), low-wear hydraulic system, and high-strength steel frame ensure a long service life, ultimate stability, and reliable operation—even in continuous use. Combined Drive: PTO & Electric Motor The HS-30PE can be operated either via PTO (540 rpm) or the integrated 400V electric motor. This offers maximum flexibility: mobile operation in the forest with a tractor, or emission- and noise-free at the yard. Robust Design—Engineered for Heavy-Duty Use The construction features high-strength steel components and a stable splitting wedge guide. Sturdy support legs provide firm footing, and large transport wheels ensure easy relocation—even on uneven terrain. Splitting Length up to 110 cm Even long trunk sections are processed with ease. The solid splitting blade made of tool steel guarantees a precise splitting line and minimal wear. Integrated Timber Lifter—More Comfort & Safety The timber lifter allows easy, effortless positioning of heavy logs and also acts as a protective guard—greatly simplifying everyday work. Two Return Modes & Speed Settings -- Automatic Return: The splitting wedge automatically returns to the preset position—ideal for fast operation. -- Manual Return: For precise splitting, particularly with irregular wood. In addition, there is a fast advance mode and a slow, high-power mode for actual splitting. Practical Features for Everyday Use -- Lowerable cylinder (down to 1.99 m) for easy transport and space-saving storage -- Two-handed safety operation for maximum protection -- 3-point hitch (Cat. I & II) for convenient tractor transport Technical Data -- Manufacturer: SCHORR -- Model: HS-30PE -- Splitting force: 30 t -- Weight: 390 kg -- Drive: 400V electric motor (5.5 kW, 16A) or PTO Dimensions: Chjdpfew R N Hmex Al Ajc -- Length: 1550 mm -- Width: 1150 mm -- Height: 2500 mm (lowered 1990 mm) -- Hydraulic cylinder: Ø 13.8 cm -- Piston rod: Ø 7 cm -- Splitting wedge: 26 cm -- Log diameter: max. 40 cm / min. 8 cm -- Wedge-ground clearance: 16 cm Speed: -- PTO: Forward 5.5 s / Return 9.5 s -- Electric: Forward 7.5 s / Return 14.5 s Your Advantages at a Glance -- Ready for immediate use—no long waiting times -- Heavy-duty design—390 kg net weight for maximum stability -- Flexible operation—tractor or 400V connection -- Convenient timber lifter for handling heavy logs -- Spare parts always available -- Professional service & support Whether delivery or collection in 48465 Schüttorf—we offer the right solution.