Gluing presse

WINTER UL-5200-200

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing oven Hjdpjum Uflefx Am Ter Conveying technology (cycle process) Electrical control system

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Hodpowgbxzefx Am Tjr

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Hsdpfeuiy Ngex Am Tsr Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic Cleaning System ULTRA300 Usable platform dimensions: 1,050 x 550 mm Maximum usable height: 450 mm Maximum load weight: 300 kg Volume: 585 liters + 70 liters (oil separator) = 655 liters Hodpfx Amexuzyfs Tjr Heating: 2 x 6 kW Completely constructed from stainless steel Thermally and acoustically insulated External dimensions approx.: L 1,700 x W 1,050 x H 2,000 mm Control system manufacturer: Fatek, HMI manufacturer: Weintek Electrical power requirement: 15 kW Includes: - Automatic pneumatic goods lift - Surface spray/rinse and oil separator for bath maintenance - Ultrasonic submersible transducers with dual-side sonication - Output: 3,000 W effective / 6,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off pistol Demonstration unit from the Glogar Technology Center, available immediately

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analog control panel, and temperature control via a digital thermostat. Functions from the PRO series can be added as optional features. We offer volumes from 60 to 7,500 liters to meet all requirements. Tank capacity: 110L Hedpof Hqavofx Am Tor External dimensions: 1970x670x970mm Usable dimensions of the tank: 550x350x250mm Ultrasonic frequency: 40kHz Ultrasonic power: 1000W

Condition: like new (used), Inline foil sealer and shrinking tunnel Hsdpfog D Nv Tsx Am Tor Make: Kallfass Type: semi/automatic shrinking tunnel Model: Mat 1606-KS1600uni Capacity: 10-15 packs/min (depending on the product) Frame: Steel Range: 1600 (belt) x 600 mm (W x H) Dimensions: L x W x H = 4000 x 2050 x 1750 mm Weight: 900 kg Electrical: 380V + N + E, 65 kW Condition: As is, working condition

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Hsdpfxoqlckps Am Ter Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Hedpfow Naanex Am Tsr MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: like new (used), Year of construction: 2021, Offered is a double spindle pick up turning machine VSC 500 DUO. The machine is equipped with 2 independent working spindles and 2 EMAG turrets. The machine can produce 2 identical workpieces with the same machining operation, as well as one workpiece in two successive machining operations. The machine can be equipped with various periphery (chip conveyor, coolant system, external automation, etc.), depending on requirements. COTROL Siemens 840 Dsl TECHNICAL DATA workpiece diameter: max. 440 mm workpiece height: max. 250 mm chuck diameter: 450 mm swing diameter: 550 mm X-stroke: 925 mm Z-stroke: 400 mm Hodpfx Aot Du Tdem Tjr TOOL CARRIER 2x EMAG disc turrets, 12x CDI 68, with driven tools Price, delivery time and equipment of the machine on request.

Condition: good (used), functionality: fully functional, overall weight: 70 kg, load capacity: 1,500 kg, total length: 1,240 mm, total width: 835 mm, Hello The offer concerns rental of a gitterbox type container for a period of one day one piece 1 eur/brut/unit/day Hedjula A Hspfx Am Ter For a larger quantity for a longer period of time price to be determined. Technical parameters of the container - dimension 1240 x 835 x970 mm - load capacity 1500 kg - color RAL 7030 - weight of container 70 kg We offer other types of containers.