Complete sawmill (stationary)

Wravor WRC 1050,1150,1225,1250,1550,2000

Condition: repair required (used), Year of construction: 1987, Gyratory crusher Model 1500 fine chamber Knedpfxeiuifvj Ah Uef Requires change axial bearings rest of machine in good condition. Can be repaired or used for spare parts. Price 1 euro per kg.

Condition: used, functionality: fully functional, fuel type: diesel, overall weight: 11,000 kg, Year of construction: 1980, operating hours: 28,000 h, All-wheel drive Kodpfx Ahei Tmhls Usnf

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Kodst Hagnopfx Ah Uenf Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: used, Small sawmill CTR550, year 2018, good condition, 4 kW, 3600 mm cutting length. Price changes reserved, errors, misprints and typesetting mistakes reserved. Kedswzzfqepfx Ah Uenf

Condition: new, Year of construction: 2025, functionality: fully functional, Our company manufactures tables for pallet production. We offer several types of tables, both with and without pneumatic control. Ksdpfxown Irqe Ah Uenf Advantages of our tables: - solid and simple construction - possibility of making various types of pallets with different dimensions - minimum working area of the table 800 mm x 600 mm - maximum working area of the table 2000 mm x 1200 mm - balancers (balancers) supporting nailers - quick and easy way to "change" the table to another pallet size - only one person is needed to operate the table - low price Possibility of sending the table by courier. Possibility of making a table "to the customer" for non-standard pallet dimensions.

Year of construction: 2023, condition: new, Cable stripping machine,wire stripper G.R.S. 12 Cable stripper This true monster can cut up to an incredible 120 mm in diameter! With 380 volts and 3 kW, this device is really built for industrial use. The heavy 210 kg of weight are therefore absolutely neccessary and of course it stands on their own two feet. The criterion for this machine: Super flexible in use with cable thicknesses between 2 mm and 120 mm. Kjdji A Ixfopfx Ah Ujnf Technical data: Cutting speed: — Processing capacity: Ø 2 mm — Ø 120 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 210 Kg Dimensions in cm: 89 × 58 × 136

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW Knsdpfxefg E Hpo Ah Ujf weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: refurbished (used), Brenta bought a new one in Italy, worked a little. A complete overhaul and service was done. Knedpfx Aoh Hnn Uoh Usf It is in excellent condition.

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, power: 389.81 kW (529.99 HP), Mobile shredder DOPPSTADT AK 560 Eco Power Diesel engine: 530 HP Fine shredding basket (hole size can be agreed) Kedpfx Aow Rz Rqjh Uonf Rear discharge conveyor with magnet roll (magnetic head pulley) Twin drive (separate drives for scraper floor and infeed roller) Hydr. self propelled drive (for moving on site) Radio remote control

Condition: new, Year of construction: 2025, ARE YOU INVOLVED IN CUTTING THICK LOGS AND ARE YOU LOOKING FOR A POWERFUL BAND SAW THAT WILL CUT YOUR THICK LOG WITHOUT PROBLEMS? THEN WE HAVE A SOLUTION FOR YOU, THE HORIZONTAL BAND SAW WRC 1550! ✔️ROBUST CONSTRUCTION THAT ENABLES SAW STABILITY ✔️MAIN MOTOR 55-110kW ✔️IDEAL RATIO BETWEEN THE DIAMETER OF THE MAIN WHEELS, THE WIDTH OF THE MAIN WHEELS, THE LENGTH, WIDTH AND THICKNESS OF THE BAND SHEET, WHICH ENABLES ACCURATE, FAST CUTTING Knedpfx Asv R Umush Usf ✔️DOUBLE-SIDED BEARING WHEELS THAT ENABLE STABILITY OF THE MACHINE EVEN IN THE LONG TERM! ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW HEAD ✔️COMPLETE HYDRAULIC EQUIPMENT ON THE SAW LINE (INCLUDING HYDRAULIC DOUBLE TURNERS DESIGNED SPECIFICALLY FOR TURNING THICK HEAVY LOGS) 👉 For more information and inquiries, contact us!